Abstract:Bone tissue engineering is one of the vital approaches used to tackle bone defects in the past decades. This approach is a risk-free alternative to conventional bone graft substitutes, such as autografts, allografts, and xenografts. Silicate bioceramics have improved mechanical properties and biological performances compared with phosphate-based ceramics. However, their brittleness limits their application in load-bearing sites. Therefore, silicate-based ceramics have been used in combination with several polymers in the form of a composite scaffold. This review article summarizes the influence of silicate ceramics on the mechanical, cytocompatibility, and bioactivity of polymeric-based scaffold for bone tissue engineering application.A schematic of composite fabrication by the incorporation of silicate ceramics into a polymer-based scaffold. The composite scaffold leads to two major effects: improvement in mechanical properties and enhancement of biological performance. As implantation proceeds, implant degradation occurs due to the apatite formation resulting from the ionic dissolution products such as Ca2+, Mg2+, and Si4+ from silicate-based ceramics. These ionic dissolution products positively affect bone cell proliferation, differentiation, and spreading. Consequently, osteogenesis leads to new bone formation and growth. This finally increases the strength of the implant area, approaching that of the host repair area. Besides, the composite scaffold could have mechanical strength close to those of natural bone. This match of mechanical properties between the composite scaffold and host bone supports bone tissue ingrowth via intrapressure stimulus, contributing to bone tissue ingrowth. Statement of significance Human bone is known as a composite material comprised of hydroxyapatite (HA) as a ceramic phase and collagen as a polymer phase. The development of hierarchical porous scaffolds to imitate the structure and properties of human natural bone is one of the major challenges in tissue engineering. Although bioactive ceramics (particularly silicate-based ceramics) have been known as promising biomaterials due to their comparable chemical compositions to those of human bone; nonetheless, their low strength limits their biomedical applications in load-bearing sites. On the other hand, polymeric biomaterials feature some disadvantages such as inadequate mechanical strength, low bioactivity, lack of binding sites for cell adhesion, and acidic degradation products. Therefore, composites are of great importance to overcome the above-mentioned shortcomings by combining the excellent ductility of biopolymers and bioactivity of ceramics. This review discusses on the influence of silicate ceramics on the mechanical, cytocompatibility, and bioactivity properties of polymer-based scaffold for potential application in bone tissue engineering.

Investigation of Mechanical Properties of Silicate Doped Synthetic Flexible Biomaterial

3D-Printed Bioceramic Scaffolds with High Strength and High Precision

Effect of Foreign Ion Substitution and Micropore Tuning in Robocasting Single-Phase Bioceramic Scaffolds on the Physicochemical Property and Vascularization

Effects Bone Regeneration Using Nanotechnology – Calcium Silicate Nano-Composites.

Composition control in biphasic silicate microspheres on stimulating new bone regeneration and repair of osteoporotic femoral bone defect

The Outstanding Mechanical Response and Bone Regeneration Capacity of Robocast Dilute Magnesium-Doped Wollastonite Scaffolds in Critical Size Bone Defects.

Silk Fibroin 3D Microparticle Scaffolds with Bioactive Ceramics: Chemical, Mechanical, and Osteoregenerative Characteristics

Investigations on the Mechanical Properties of Glass Fiber/Sisal Fiber/Chitosan Reinforced Hybrid Polymer Sandwich Composite Scaffolds for Bone Fracture Fixation Applications

A review: silicate ceramic-polymer composite scaffold for bone tissue engineering

Mechanical properties and biocompatibility of porous titanium scaffolds for bone tissue engineering

Bioactive diatomite and POSS silica cage reinforced chitosan/Na-carboxymethyl cellulose polyelectrolyte scaffolds for hard tissue regeneration

Physical, mechanical and in vitro biological evaluation of synthesized biosurfactant-modified silanated-gelatin/sodium alginate/45S5 bioglass bone tissue engineering scaffolds

Fibroin reinforced, strontium-doped calcium phosphate silicate cements for bone tissue engineering applications

Rational Design of Bioceramic Scaffolds with Tuning Pore Geometry by Stereolithography: Microstructure Evaluation and Mechanical Evolution

Fabrication and characterization of a new, strong and bioactive ceramic scaffold for bone regeneration

Designing of porous PMMA/diopside bone cement for non-load bearing applications

Silk Coating on a Bioactive Ceramic Scaffold for Bone Regeneration: Effective Enhancement of Mechanical and in Vitro Osteogenic Properties Towards Load-Bearing Applications

Development of Porous Photopolymer Resin-SWCNT Produced by Digital Light Processing Technology Using for Bone Femur Application

Open the pores – Polydimethylsiloxane influences the porous structure of cancellous bone surrogates for biomechanical testing of osteosyntheses

Study of the Mechanical Property and in Vitro Biocompatibility of Casio3 Ceramics

Controlling the Biological Activity and Mechanical Properties of Sol-Gel Synthesized Peg-Cao-Sio2-P2o5 Hybrid Materials for Bone Tissue Engineering