Abstract:Autogenous cancellous bone graft is used to heal critical-size segmental long bone defects and defects in the maxillofacial skeleton. Harvesting of bone graft is traumatic, causes morbidity of the donor site, and often results in complications. Thus, there is a need for new biologically functional bone graft substitutes that, instead of autogenous bone graft, could be used to facilitate bone regeneration in critical-size defects. Porous biodegradable elastomeric polyurethane scaffolds combined with the patient's own bone marrow could potentially be such bone substitutes. The elastomeric bone substitute prevents shear forces at the interface between bone and rigid, e.g., ceramic bone substitutes and establishes an intimate contact with the native bone ends, thus facilitating the proliferation of osteogenic cells and bone regeneration. Crosslinked 3D biodegradable polyurethane scaffolds (foams) with controlled hydrophilicity for bone graft substitutes were synthesized from biocompatible reactants. The scaffolds had hydrophilic-to-hydrophobic content ratios of 70:30, 50:50, and 30:70. The reactants used were hexamethylene diisocyanate, poly(ethylene oxide) diol (MW = 600) (hydrophilic component), and poly(epsilon-caprolactone) diol (M(w) = 2000), amine-based polyol (M(w) = 515) or sucrose-based polyol (M(w) = 445) (hydrophobic component), water as the chain extender and foaming agent, and stannous octoate, dibutyltin dilaurate, ferric acetylacetonate, and zinc octoate as catalysts. Citric acid was used as a calcium complexing agent, calcium carbonate, glycerol phosphate calcium salt, and hydroxyapatite were used as inorganic fillers, and lecithin or solutions of vitamin D(3) were used as surfactants. The scaffolds had an open-pore structure with pores whose size and geometry depended on the material's chemical composition. The compressive strengths of the scaffolds were in the range of 4-340 kPa and the compressive moduli in the range of 9-1960 kPa, the values of which increased with increasing content of polycaprolactone. Of the two materials with the same amount of polycaprolactone the compressive strengths and moduli were higher for the one containing inorganic fillers. The scaffolds absorbed water and underwent controlled degradation in vitro. The amount of absorbed water and susceptibility to degradation increased with the increasing content of the polyethylene oxide segment in the polymer chain and the presence in the material of calcium complexing moiety. All polyurethane scaffolds induced the deposition of calcium phosphate crystals, the structure and calcium:phosphorus atomic ratio of which depended on the chemical composition of the polyurethane and varied from 1.52-2.0.

Open the pores – Polydimethylsiloxane influences the porous structure of cancellous bone surrogates for biomechanical testing of osteosyntheses

Biomechanical validation of novel polyurethane-resin synthetic osteoporotic femoral bones in axial compression, four-point bending and torsion

Integrated evaluation of biomechanical and biological properties of the biomimetic structural bone scaffold: Biomechanics, simulation analysis, and osteogenesis

Tissue-specific mesenchymal stem cell-dependent osteogenesis in highly porous chitosan-based bone analogs

Mechanical interaction between additive-manufactured metal lattice structures and bone in compression: implications for stress shielding of orthopaedic implants

Effect of Porosity and Pore Shape on the Mechanical and Biological Properties of Additively Manufactured Bone Scaffolds.

Characterization and osteoblast-like cell compatibility of porous scaffolds: bovine hydroxyapatite and novel hydroxyapatite artificial bone

Porous Surface Modified Bioactive Bone Cement for Enhanced Bone Bonding

Effect of Porosity and Pore Shapes on the Mechanical and Biological Properties of Additively Manufactured Bone Scaffolds

Bone Tissue Regeneration: the Role of Finely Tuned Pore Architecture of Bioactive Scaffolds Before Clinical Translation

Preparation, degradation, and calcification of biodegradable polyurethane foams for bone graft substitutes

Characterization of the osteogenic differentiation capacity of human bone cells on hybrid β-TCP/ZrO 2 structures

Biological Evaluation of Porous Aliphatic Polyurethane/hydroxyapatite Composite Scaffolds for Bone Tissue Engineering.

Influence Of Biomechanical And Biochemical Stimulation On The Proliferation And Differentiation Of Bone Marrow Stromal Cells Seeded On Polyurethane Scaffolds

Mimicking the Architecture and Dissolution Chemistry of Cancellous Bone Tissue to Optimize the Biocompatibility of Bioactive Scaffolds

In Vitro and in Vivo Osteoconductivity of Bone Marrow Stromal Cells in Biomimetic Polycaprolactone/Calcium Phosphate Cement Composites

The effect of biomimetic coating and cuttlebone microparticle reinforcement on the osteoconductive properties of cellulose-based scaffolds

Effect of Structure on Osteogenesis of Bone Scaffold: Simulation Analysis Based on Mechanobiology and Animal Experiment Verification

Improving material properties of a poloxamer P407 hydrogel‐based hydroxyapatite bone substitute material by adding silica—A comparative in vivo study

In Vitro Evaluation of Pore Size Graded Bone Scaffolds with Different Material Composition

Additive manufacturing of Bio-inspired ceramic bone Scaffolds: Structural Design, mechanical properties and biocompatibility