Abstract:The associated effect of sodium chloride and dihydrate gypsum on the mechanical performance of a slag-based geopolymer activated by quicklime was investigated by compressive strength, shrinkage, and square circle anti-cracking tests of mortar with a 0.5 water–binder ratio and a 1:3 binder–sand ratio, as well as paste soundness, powder X-ray diffraction (XRD), thermogravimetric analysis (TGA), scanning electron microscopy with energy dispersive spectroscopy (SEM-EDS), and mercury intrusion porosimetry (MIP) of the paste. The results indicate that (1) when dihydrate gypsum is used alone, it combines with calcium aluminate hydrate (C-A-H) to form calcium sulfoaluminate hydrate (AFt), which encourages the hydration process of slag. A 7.5% addition can result in an increase of 97.33% and 36.92% in 3-day and 28-day compressive strengths, respectively. When NaCl is used by itself, it facilitates the condensation of the aluminum silicate tetrahedron unit and generates zeolite. A 2% dosage can lead to a 66.67% increase in the 3-day compressive strength, while causing a 15.89% reduction in the 28-day compressive strength. (2) The combined effect of 2% NaCl and 7.5% gypsum results in the formation of needle-like and rod-shaped AFt, Friedel's salt, and plate-like Kuzel's salt in the geopolymer. This leads to an increase in 3-day and 28-day compressive strengths by 148% and 37.85%, respectively. Furthermore, it reduces the porosity by 18.7%. (3) Both NaCl and gypsum enhance the paste soundness of the slag-based geopolymer, and they do no harm to the crack resistance of the geopolymer. The drying shrinkage of the geopolymer at 28 days is just 0.48 × 10−3, which is only 66.7% of OPC. This slag-based geopolymer has a simple preparation process, good volume stability, low raw material cost, low energy consumption, and low carbon emissions. It can be used instead of 32.5 slag Portland cement in plain concrete applications, and has high engineering, economic, and environmental values.

Effect of Sodium Gluconate on the Fluidity and Early Hydration of Cement Pastes Along with Polycarboxylate Ether

Effect of polysaccharides on the hydration of cement paste at early ages

Poly(carboxylated ether)s as Cement Additives: The Effect of the Addition Method on Hydration Kinetics

Effects of Comb-Like PCE and Linear Copolymers on Workability and Early Hydration of a Calcium Sulfoaluminate Belite Cement

The Dispersing Performances of Polycarboxylate Superplasticizer in Cement Pastes Prepared with Deionized Water and Seawater

Effect of calcium formate as an accelerator on the physicochemical and mechanical properties of pozzolanic cement pastes

Effects of Polycarboxylate Superplasticizers on Fluidity and Early Hydration in Sulfoaluminate Cement System

Effect of polycarboxylate superplasticizer and calcium nitrite on the fluidity and early strength of belite sulfoaluminate cement

Comparative Study of Two PCE Superplasticizers with Varied Charge Density in Portland Cement and Sulfoaluminate Cement Systems

The Effect of Dry Mix Sodium Hydroxide onto Workability and Compressive Strength of Geopolymer Paste

The Interaction of Sodium Citrate and Polycarboxylate-Based Superplasticizer on the Rheological Properties and Viscoelasticity of Cement-Based Materials

The acceleration effect of nano C-S-H-PCE on the microstructure formation and evolution at early age of cement paste

Effects of Retarding Admixture, Superplasticizer and Supplementary Cementitious Material on the Rheology and Mechanical Properties of High Strength Calcium Sulfoaluminate Cement Paste

Characterization of the Nanoparticles Formed in Aqueous Phase of Hydrating Cement Pastes in the Presence of PCEs

The Effect of Superabsorbent Polymer and Nano-Silica on the Properties of Blended Cement

The Effect of Ethylene Diamine Tetra(Methylene Phosphonic Acid) Sodium on the Hydration of Tricalcium Silicate at 80 °C

Associated Effects of Sodium Chloride and Dihydrate Gypsum on the Mechanical Performance and Hydration Properties of Slag-Based Geopolymer

Hydration behavior and strength development of supersulfated cement prepared by calcined phosphogypsum and slaked lime

Effect of anchoring groups of polycarboxylate ether superplasticizer on the adsorption and dispersion of cement paste containing montmorillonite

NMR, XRD, IR and synchrotron NEXAFS spectroscopic studies of OPC and OPC/slag cement paste hydrates

Effects of Calcium Silicate Slag on Hydration of Cementitious Pastes