Abstract:Advanced oxidation processes(AOPs),especially AOPs that use transition metals as catalyst activated oxidants,are extremely effective in removing organic pollutants;they can completely degrade pollutants into CO2 and H2O.Thus,they have been widely studied in the field of water treatment.However,owing to the low catalytic efficiency and metal leakage,their applicability is currently limited.In this paper,the composite catalyst CoFe2O4/CuO containing spinel cobalt ferrite and copper oxide was successfully prepared by the chemical precipitation and sol-gel methods with two steps.The prepared CoFe2O4/CuO was characterized using scanning electron microscopy(SEM),X-ray photoelectron spectroscopy(XPS),and X-ray diffraction(XRD),and its ability to remove sulfamethoxazole(SMX)with different AOPs was evaluated.Characterization results show that CoFe2O4 and CuO are well-complexed together,and the catalyst has good crystallinity.The effects of peracetic acid(PAA)concentration,catalyst dosage,common interfering substances(Cl-,HCO3-,SO42-,and HA)in water,and different radical scavengers on SMX removal were also investigated.The results show that CoFe2O4/CuO has the characteristics of both CoFe2O4 and CuO.Compared with CoFe2O4 or CuO alone,CoFe2O4/CuO exhibits an excellent activation performance for PAA.Under the optimal reaction conditions(catalyst dosage=20 mg·L-1,c(PAA)=200 μmol·L-1,c(SMX)=10 μmol L-1),the degradation rate of SMX reaches 92％within 90 s.The existence of Cu+/Cu2+electron pairs can convert Co from the high valence to low valence state and accelerate the conversion of Co2+/Co3+,thereby improving the catalytic performance.An increase in the PAA concentration increases the removal efficiency of SMX;however,too high a concentration lowers removal efficiency.Compared to acidic or alkaline conditions,the CoFe2O4/CuO reaction system exhibits a better removal rate of SMX under neutral conditions.The common interfering substances in the environment have different effects on the CoFe2O4/CuO reaction system.Cl-promotes the degradation of SMX by producing Cl-,HCO3-and HA inhibit the removal of SMX because of their quenching effect on free radicals,and SO42-has no significant effect on the progress of the reaction.The XPS characterization results before and after the reaction show that the valence state of Co changes,indicating that Co is the main element involved in the activation of PAA.Radical quenching experiments demonstrate that the organic radical(R-O·)plays a dominant role in the removal of SMX.Further,the removal rate of SMX decreases after the catalyst is subjected to 3 recycle;nevertheless,it achieves a relatively rapid degradation of SMX(85％within 10 min).

Ascorbic Acid-Enhanced CuO/Percarbonate Oxidation: Insights Into the pH-Dependent Mechanism

Boosting Peracetic Acid Activation with Cu Single-Atom Catalysts for Sulfamethoxazole Abatement: A Nonradical Pathway and ‘double Engine’ Driving Mechanism

Catalytic Oxidation of Sulfamethazine by a Novel Cus/Percarbonate/Tetraacetylethylenediamine Process:Performance and Mechanism

Activation of sodium percarbonate by micro amounts of copper for highly efficient degradation of acid orange 7

Doped Cu0 and sulfidation induced transition from R-O• to •OH in peracetic acid activation by sulfidated nano zero-valent iron-copper

Efficient Degradation of Sulfamethazine Via Activation of Percarbonate by Chalcopyrite.

Oxidation of Sulfamethazine by a Novel CuS/calcium Peroxide/tetraacetylethylenediamine Process: High Efficiency and Contribution of Oxygen-Centered Radicals

Insights into a Novel CuS/percarbonate/tetraacetylethylenediamine Process for Sulfamethazine Degradation in Alkaline Medium

Insights into a novel CuS/percarbonate/tetraacetylethylenediamine process for sulfamethazine degradation in alkaline medium.

Cu(III) generation and air sparging extend catalytic effectiveness of Cu2S/H2O2 from neutral to acidic condition: performance and mechanism in comparison with CuS/H2O2

Improvement of Fe(III)/percarbonate system by molybdenum powder and tripolyphosphate: Co-catalytic performance, low oxidant consumption, pH-dependent mechanism

Insights into the pH-dependent mechanism of peracetic acid activation by biochar-supported zero-valent iron/cobalt bimetallic nanoparticles: The shift of reactive sites and the dual role of hydrogen peroxide

New Insights into the Ph-Dependent Removal of Sulfamethoxazole in Peracetic Acid Activation Systems: from Mechanistic Exploration to Practical Application Potentials

Ascorbic Acid-Assisted Iron Silicate Composite Activated Peroxydisulfate for Enhanced Degradation of Aqueous Contaminants: Accelerated Fe(III)/Fe(II) Cycle and the Interaction Between Iron and Silicate

Revealing the importance of non-radical mechanisms in the degradation of sulfamethazine by Lewis acid-etched Co@MXene-activated peroxyacetic acid

Activation of Dissolved Molecular Oxygen by Ascorbic Acid-Mediated Circulation of Copper(Ii): Applications and Limitations

Highly Efficient Degradation of Sulfamethoxazole Using Activating Peracetic Acid with CoFe2O4/CuO

A combined radical and non-radical oxidation processes for efficient degradation of Acid Orange 7 in the homogeneous Cu(II)/PMS system: important role of chloride

Strongly Enhanced persulfate activation by bicarbonate accelerated Cu (III)/Cu (I) redox cycle

CuS assisted Fe(III)-induced peracetic acid activation for bisphenol A degradation: significance of synergetic roles of copper and sulfur in enhanced Fenton-like process

Copper oxide combing with multi-walled carbon nanotubes activated peroxyacetic acid for the degradation of sulfamethoxazole