Abstract:Advanced oxidation processes(AOPs),especially AOPs that use transition metals as catalyst activated oxidants,are extremely effective in removing organic pollutants;they can completely degrade pollutants into CO2 and H2O.Thus,they have been widely studied in the field of water treatment.However,owing to the low catalytic efficiency and metal leakage,their applicability is currently limited.In this paper,the composite catalyst CoFe2O4/CuO containing spinel cobalt ferrite and copper oxide was successfully prepared by the chemical precipitation and sol-gel methods with two steps.The prepared CoFe2O4/CuO was characterized using scanning electron microscopy(SEM),X-ray photoelectron spectroscopy(XPS),and X-ray diffraction(XRD),and its ability to remove sulfamethoxazole(SMX)with different AOPs was evaluated.Characterization results show that CoFe2O4 and CuO are well-complexed together,and the catalyst has good crystallinity.The effects of peracetic acid(PAA)concentration,catalyst dosage,common interfering substances(Cl-,HCO3-,SO42-,and HA)in water,and different radical scavengers on SMX removal were also investigated.The results show that CoFe2O4/CuO has the characteristics of both CoFe2O4 and CuO.Compared with CoFe2O4 or CuO alone,CoFe2O4/CuO exhibits an excellent activation performance for PAA.Under the optimal reaction conditions(catalyst dosage=20 mg·L-1,c(PAA)=200 μmol·L-1,c(SMX)=10 μmol L-1),the degradation rate of SMX reaches 92％within 90 s.The existence of Cu+/Cu2+electron pairs can convert Co from the high valence to low valence state and accelerate the conversion of Co2+/Co3+,thereby improving the catalytic performance.An increase in the PAA concentration increases the removal efficiency of SMX;however,too high a concentration lowers removal efficiency.Compared to acidic or alkaline conditions,the CoFe2O4/CuO reaction system exhibits a better removal rate of SMX under neutral conditions.The common interfering substances in the environment have different effects on the CoFe2O4/CuO reaction system.Cl-promotes the degradation of SMX by producing Cl-,HCO3-and HA inhibit the removal of SMX because of their quenching effect on free radicals,and SO42-has no significant effect on the progress of the reaction.The XPS characterization results before and after the reaction show that the valence state of Co changes,indicating that Co is the main element involved in the activation of PAA.Radical quenching experiments demonstrate that the organic radical(R-O·)plays a dominant role in the removal of SMX.Further,the removal rate of SMX decreases after the catalyst is subjected to 3 recycle;nevertheless,it achieves a relatively rapid degradation of SMX(85％within 10 min).

Boosting Peracetic Acid Activation with Cu Single-Atom Catalysts for Sulfamethoxazole Abatement: A Nonradical Pathway and ‘double Engine’ Driving Mechanism

Highly Efficient Activation of Peracetic Acid by Nano-Cuo for Carbamazepine Degradation in Wastewater: the Significant Role of H2O2 and Evidence of Acetylperoxy Radical Contribution.

Degradation of SMX with Peracetic Acid Activated by Nano Core-shell Co@NC Catalyst

Copper oxide combing with multi-walled carbon nanotubes activated peroxyacetic acid for the degradation of sulfamethoxazole

Activation of Peracetic Acid with Cobalt Anchored on 2D Sandwich-Like MXenes (co@mxenes) for Organic Contaminant Degradation: High Efficiency and Contribution of Acetylperoxyl Radicals

Doped Cu0 and sulfidation induced transition from R-O• to •OH in peracetic acid activation by sulfidated nano zero-valent iron-copper

Converting Peracetic Acid Activation by Fe3O4 from Nonradical to Radical Pathway Via the Incorporation of L-cysteine

Non-Radical Activation of Peracetic Acid by Powdered Activated Carbon for the Degradation of Sulfamethoxazole

Enhancement in Sulfamethoxazole Degradation Via Efficient Heterogeneous Activation of Peracetic Acid by FeS

Activation of peracetic acid by spinel FeCo2O4 nanoparticles for the degradation of sulfamethoxazole

Electrochemical Activation of Peracetic Acid with Activated Carbon Fiber Cathode for Sulfamethoxazole Elimination: Long-Lasting Catalytic Performance and Mechanism

Revealing the importance of non-radical mechanisms in the degradation of sulfamethazine by Lewis acid-etched Co@MXene-activated peroxyacetic acid

Boosting activation of peracetic acid by Co@mZVI for efficient degradation of sulfamethoxazole: Interesting two-phase generation of reactive oxidized species

New Insights into the Ph-Dependent Removal of Sulfamethoxazole in Peracetic Acid Activation Systems: from Mechanistic Exploration to Practical Application Potentials

Efficient Activation of Peracetic Acid by Multi-Valent Cu7S4 for the Degradation and Detoxication of Tetracycline Hydrochloride: Cu3+ Acts As an Active Site

Unusually Improved Peracetic Acid Activation for Ultrafast Organic Compound Removal Through Redox-Inert Mg Incorporation into Active Co3O4

Ultra-rapid and Long-Lasting Activation of Peracetic Acid by Cu-Co Spinel Oxides for Eliminating Organic Contamination: Role of Radical and Non-Radical Catalytic Oxidation

Highly Efficient Degradation of Sulfamethoxazole Using Activating Peracetic Acid with CoFe2O4/CuO

Co-Mn spinel oxides trigger peracetic acid activation for ultrafast degradation of sulfonamide antibiotics: Unveiling critical role of Mn species in boosting Co activity

Efficient activation of peracetic acid by multi-valent Cu 7 S 4 for the degradation and detoxication of tetracycline hydrochloride: Cu 3+ acts as an active site

Activated peracetic acid by Mn3O4 for sulfamethoxazole degradation: A novel heterogeneous advanced oxidation process