Abstract:In the manufacturing of thin wall components for aerospace industry, apart from the side wall contour error, the Remaining Bottom Thickness Error (RBTE) for the thin-wall pocket component (e.g. rocket shell) is of the same importance but overlooked in current research. If the RBTE reduces by 30%, the weight reduction of the entire component will reach up to tens of kilograms while improving the dynamic balance performance of the large component. Current RBTE control requires the off-process measurement of limited discrete points on the component bottom to provide the reference value for compensation. This leads to incompleteness in the remaining bottom thickness control and redundant measurement in manufacturing. In this paper, the framework of data-driven physics based model is proposed and developed for the real-time prediction of critical quality for large components, which enables accurate prediction and compensation of RBTE value for the thin wall components. The physics based model considers the primary root cause, in terms of tool deflection and clamping stiffness induced Axial Material Removal Thickness (AMRT) variation, for the RBTE formation. And to incorporate the dynamic and inherent coupling of the complicated manufacturing system, the multi-feature fusion and machine learning algorithm, i.e. kernel Principal Component Analysis (kPCA) and kernel Support Vector Regression (kSVR), are incorporated with the physics based model. Therefore, the proposed data-driven physics based model combines both process mechanism and the system disturbance to achieve better prediction accuracy. The final verification experiment is implemented to validate the effectiveness of the proposed method for dimensional accuracy prediction in pocket milling, and the prediction accuracy of AMRT achieves 0.014 mm and 0.019 mm for straight and corner milling, respectively.

Corner milling force prediction and improvement method of aviation thin-walled structural parts

Milling Error Prediction of Thin-Walled Parts During High-Speed Machining

Numerical Simulation Study on Milling Force for Aerospace Aluminum Alloy

Machining Distortion Prediction of Aerospace Monolithic Components

Finite Element Simulation and Analysis of Deformation in Machining of Aeronautical Aluminum Alloy Thin-Walled Workpiece

An analytical approach to cutting force prediction in milling of carbon fiber reinforced polymer laminates

Research on Cutting Force of Corner Milling of Inclined Plane

Prediction of Cutting Forces in Milling of Circular Corner Profiles

Surface Topography Prediction Model in Milling of Thin-Walled Parts Considering Machining Deformation

Tool path generation and optimization method for pocket flank milling of aircraft structural parts based on the constraints of cutting force and dynamic characteristics of machine tools

A New Approach of Modelling Bottom Edge Cutting in 4-Axis Rough Milling of Complex Parts and Its Application on Feed Rate Optimization

Residual compressive stress prediction determined by cutting-edge radius and feed rate during milling of thin-walled parts

Micro milling force prediction of arc thin-walled parts considering dual flexibility coupling deformation

Three-dimensional turning force prediction based on hybrid finite element and predictive machining theory considering edge radius and nose radius

A prediction method of cutting force coefficients with helix angle of flat-end cutter and its application in a virtual three-axis milling simulation system

A Cutting Force Model Based on Compensated Chip Thickness in Five-Axis Flank Milling

Feedrate Scheduling Method for Constant Peak Cutting Force in Five-Axis Flank Milling Process

An accurate prediction method of cutting forces in 5-axis flank milling of sculptured surface

Framework and development of data-driven physics based model with application in dimensional accuracy prediction in pocket milling

A Hybrid Approach for Cutting Force Prediction in Flank Milling Based on Analytical and 3D Finite Element Method

Mechanistic Modeling of Five-Axis Machining with a Flat End Mill Considering Bottom Edge Cutting Effect