Abstract:The stiffness and failure properties of cement-asphalt mastic-aggregate (C-AM-A) interface are among the most important factors affecting the performance of pouring semi-flexible pavement materials (SFP). Therefore, determining the characteristics of C-AM-A interface are essential for guiding the design of SFP from the perspective of interface enhancement. In this study, the failure characteristics of C-AM-A interfaces are examined experimentally and numerically. Firstly, the effects of temperature and the proportion of cement substituting limestone filler on the bonding strength of C-AM-A interface are analyzed via pull-off tests. Then, an innovative test method based on a three-point bending test of C-AM-A beam is proposed to investigate the influence of test temperature and asphalt mastic type on the fracture characteristics of the C-AM-A interface. Finally, based on the cohesive surface techniques, numerical modeling of C-AM-A beam under three-point bending was applied to study the effect of cohesive parameters on the interfacial fracture characteristics. The results show that the interface bonding strength decreased significantly with the increase of temperature. Using cement as a filler improves the bonding strength, fracture strength, stiffness and fracture energy of C-AM-A interface as compared to the case when limestone filler is used. As the temperature increases from -10 degrees C to 20 degrees C, the failure mode of the C-AM-A interface first alters from adhesive failure to mixed failure mode, and then to cohesive failure. It suggests that enhancing the adhesion of C-AM-A interface is more advantageous for improving the fracture resistance at low temperatures, while increasing the interface cohesion is more important at relatively high temperatures. The laboratory test methods, the numerical model and methodology developed in this study are useful to study the failure behavior of C-AM-A interface and optimize the performance of SFP from the perspective of interface enhancement.

Temperature dependency analysis of the fracture characteristics of semi-flexible pavement (SFP) mixtures using acoustic emission technique

Fracture Behavior of Asphalt Pavement with Cracked Base Course under Low Temperature

Diagnosis of Damage Evolution Process for Asphalt Mixtures Using Pattern Recognition with Acoustic Emission Signals

High- and Low-Temperature Fracture Behavior of Pervious Asphalt Mixtures under Different Freeze–thaw Cycles Based on Acoustic Emission Technique

Identification of Damage Mechanisms During Splitting Test on SFP at Different Temperatures Based on Acoustic Emission

Quantitative Analysis of the Role of Temperature in the Mesoscale Damage Process of Semi Flexible Pavement Composite Through Finite Element Method

Wavelet and Fractal Analysis of Acoustic Emission Characteristic of Fatigue Damage of Asphalt Mixtures

Viscoelastic Fracture Analysis of Asphalt Concrete Pavement with Cracks

Multiscale Finite Element Analysis of Layer Interface Effects on Cracking in Semi-Flexible Pavements at different temperatures

Damage Analysis of Semi-Flexible Pavement Material under Axial Compression Test Based on Acoustic Emission Technique

Evaluation Approach of Fracture Behavior for Asphalt Concrete with Different Aggregate Gradations and Testing Temperatures Using Acoustic Emission Monitoring

An Investigation on Failure Behavior of Semi-Flexible Composite Mixture at Different Temperatures

Thermal stress and fracture temperature prediction for flexible pavement

Cracking Process Analysis and Fracture Pattern Recognition of Asphalt Mixture Based on Acoustic Emission Characteristics

Research on Cracking Characteristics and Failure Modes of Semi-Flexible Pavement Materials

Experimental and Numerical Analyses on the Fracture Characteristics of Cement-Asphalt Mastic-Aggregate Interface

Influence of Temperature on the Mechanical Response of Asphalt Mixtures Using Microstructural Analysis and Finite-Element Simulations

Investigation of the Microstructural Fracture Behaviour of Asphalt Mixtures Using the Finite Element Method

Fatigue Resistance and Cracking Mechanism of Semi-Flexible Pavement Mixture

Fracture Behavior Of Permeable Asphalt Mixtures With Steel Slag Under Low Temperature Based On Acoustic Emission Technique

Rutting and Surface-Initiated Cracking Mechanisms of Semi-Flexible Pavements with Cement Asphalt Emulsion Pastes