Abstract:Low and intermediate temperature cracking are two key factors for fracture and failure of hot mix asphalt (HMA), which impose huge costs on transportation departments and related agencies around the world. These two kinds of cracking may apear in the short- or long-term owing to states such as freezeing-thawing damage (FTD) and the aging mechanism. On the other hand, due to its unique features, nanomaterials are a suitable option for improving the mechanical features of bituminous mixes, which can affect the short-term performance and long-term performance. In this study, low and intermediate temperature fracture specification of Nano-molybdenum disulfide (MDS)-reinforced hot mix asphalt (HMA) under long-term conditions was evaluated. For this goal, two semi-circular bend (SCB) geometries comprising 90 degree and angled cracks, which were called symmetric SCB and classical-reinforced SCB-2, were made. Then, two various conditions, i.e. three freeze–thaw cycles and six days of aging operation were performed on various mixes in order to simulate the long-term performance of the bituminous mixes. Finally, the HMA samples with and without MDS were subjected to the three-point SCB test at the final temperatures of −15 °C and + 15 °C. The findings demonstrated that mixes comprising 0.3 % and 0.6 % MDS had more increased fracture energy (FE), fracture toughness (K IC ), and stiffness under pure tension at low and medium temperatures (short-term and long-term fracture specification). In fact, MDS caused an increase in the fracture indices by increasing the maximum force (P max ) and displacement at the time of fracture. At ± 15 °C and for the geometry comprising the 90 degree and 35 degree cracks, the HMA and Nano MDS-reinforced HMA mixes had more suitable flexibility under 3 FTC compared to 0 FTC; while, the flexibility of the HMA and Nano MDS-reinforced HMA mixes decreased under aging mechanism. In discussing the long-term performance of HMA mixture (with and without modifiers), the findings showed that applying three FTD's cycles to the mixes caused a decrease in K IC , FE, and P max . Also, reducing the stiffness of various mixes under 3 FTC, and increasing the flexibility of the mixes were other findings of this study. In addition, the simultaneous use of both SCB geometries comprising 90 degree and 35 degree cracks was proposed to study the fracture specification of bituminous mixes owing to the more inferior average FE and K IC . Finally, the application of 3FTC on bituminous mixes can more suitable simulate the long-term performance of asphalt pavement (compared to aging mechanism).

Characteristics of Mineral Fillers and Their Effects on Mastic Fracture Resistance at Intermediate Temperature 20 ℃

Evaluation of Test Methods for Fracture Resistance of High Modulus Asphalt Binders from Rheological and Mechanical Perspectives

Influence of the Properties of Filler on High and Medium Temperature Performances of Asphalt Mastic

Role of mineral filler in asphalt mixture

Characterization of Zirconium Tungstate Filler and Performance Investigation on Asphalt Mastic Made with Zirconium Tungstate Filler

Effect of Filler on Thermodynamic and Mechanical Behaviour of Asphalt Mastic: a MD Simulation Study

Investigation of the Microcharacteristics of Asphalt Mastics under Dry–Wet and Freeze–Thaw Cycles in a Coastal Salt Environment

Experimental Characterization of the Compatibility Between Bitumen and Fillers from a Perspective of Bitumen Components and Filler Characteristics

Pavement Performance Study of Asphalt-mineral Filler Mastic by Rheology Test

Evaluation of particle morphology and size of mineral filler and their effects on mastic rheological and creep behavior: Experimental and numerical characterizations

Interaction Between Asphalt and Mineral Fillers and Its Correlation to Mastics’ Viscoelasticity

Effect of Mineral Fillers Adsorption on Rheological and Chemical Properties of Asphalt Binder

Research on high- and low-temperature properties of asphalt-mineral filler mastic

Interfacial Thickness and Interaction Between Asphalt and Mineral Fillers

Effect of filler in asphalt mastic on rheological behaviour and susceptibility to rutting

Pure mode I fracture specification of molybdenum disulfide nanoparticles (MDS)-reinforced hot mix asphalt (HMA) under long-term conditions

Influence of Mineral Fillers on Performance of Asphalt Rubber Mixtures

Influence of Iron Tailing Filler on Rheological Behavior of Asphalt Mastic

Effect of Fillers on the Pavement Performance of Asphalt Binder

Performance of Asphalt Mastic and Asphalt Mixture with Harmless Municipal Solid Waste Incineration Fly Ash

Study on the Phase Behavior of Asphalt Mastic