NONLINEAR DEFORMATION-FORCE MODEL OF A CONCRETE BAR WITH NON-METALLIC COMPOSITE REINFORCEMENT IN THE GENERAL CASE OF A STRESSED STATE
I. Karpiuk,Ye. Klymenko,V. Karpiuk,M. Karpiuk,,,,
DOI: https://doi.org/10.31650/2618-0650-2021-3-1-6-26
2021-06-01
Mechanics And Mathematical Methods
Abstract:The article discusses a nonlinear deformation-force model of a concrete bar structure with a non-metallic composite reinforcement (NKA-FRP) in the general case of a stressed state, when all four internal force factors from an external load (namely, bending and twisting moments, transverse and longitudinal forces). A sufficiently deep and meaningful analysis of well-known studies on the selected topic is given. It has been established that the proposed nonlinear deformation-force model of a bar structure with FRP in the general case of a stressed state can be practically useful due to the possibility of its application in the design or reinforcement of beams, girders, columns and elements of rosette trusses of rectangular cross-section, which are operated under aggressive environmental conditions. This model can also be used to check the bearing capacity of existing FRP concrete bar structures, which operate not only under the influence of an aggressive environment, but also under conditions of a complex stress-strain state. In the course of the research, an algorithm was developed for determining the bearing capacity of the design section of a concrete rod with FRP under its complex stress state. General physical relations for the design section are given in the form of a stiffness matrix. The algorithm for calculating a concrete bar with FRP consists of a block for inputting the initial data, the main part, auxiliary subroutines for checking the conditions for increasing the load vector and depletion of the bearing capacity, as well as a block for printing the calculation results. At each stage of a simple static stepwise increasing load, the calculation is carried out by performing a certain number of iterations until the accuracy of determining all components of the deformation vector satisfies a certain predetermined value. The features and patterns of changes in normal and tangential stresses, generalized linear and angular deformations, as well as the equations of equilibrium of a concrete bar with FRP, which operates under the influence of an aggressive environment under conditions of a complex stress state, are also considered.