Abstract:As the coproduct of steelmaking, steelmaking slag, volumetrically expansive-prone without treatment, has been satisfactorily used as an aggregate base course material in highway construction. Although numerous technical reports and papers have revealed that steel slag aggreged using in rigid matrixes, the end product, paving block, non-structural concrete, for example, possesses superb strength and durability properties, the application of steel slag aggregate as a concrete aggregate is currently prohibited in highway construction. Naturally, researchers explore the practicality of use of steel slag, how to connect the laboratory experiment results to the end-product behavior, and further convert the research results into real construction? For all nontraditional or secondary materials utilization, the procedure of laboratory material examination, lab and field trial test are critical. To generalize the utilization, usability criteria establishment is necessary. This paper tries to use step-by-step method and plain language to explain how the volumetrically expansion can be simulated in lab testing apparatus, and based on the model, the mathematical deduction can result in a numerical usability criterion for steel slag use as a coarse aggregate in concrete (a rigid material). Therefore the paper is composed four main parts, laboratory test methods to examine the expansion force resulted from steel slag; converting the measured expansion force in a given volume of mass aggregate to the expansion (body) force of a single particle; modeling of slag and end material disruption; and a usability criterion from numerical deduction for the use of expansive-prone coarse slag in concrete or other rigid matrices. The paper provides the solutions to answer the above questions. Through the mathematical and mechanical modeling, provides the potential criteria that could result in specifications and guidance establishment for broad volumetric expansive-prone slags.

Simulation of the strain diagram of a slag-concrete element subject to bending

Analytical Model for the Bond Stress-Slip Relationship of Deformed Bars in Normal Strength Concrete

Evaluation of corrosion morphology on mechanical properties of reinforcing steel bars using numerical simulation and simplified analytical model

Cohesive Cracking Simulation of Concrete Using Effective Modulus

Experimental studies of the bearing capability of a type of steel-concrete composite slab

Theoretical analysis on bond-slip constitutive relationship on tube and concrete interface in centrifuge concrete filled steel tubular structures

STRESS-STRAIN STATE OF BENT REINFORCED CONCRETE ELEMENTS OF CONTINUOUS AND COMPOSITE CROSS-SECTION BASED ON A REFINED NONLINEAR CALCULATION METHOD

Application of a Nonlinear Deformation Model to the Analysis of Complete Moment-Curvature Diagrams of Reinforced Concrete Elements with Reinforcement A500

Mechanical Simulation and Numerical Deduction for Volume Expansive-Prone Slag in a Rigid Matrix

Mesoscale Modelling of Bond Performance Between Deformed Steel Bar and Concrete Subjected to Dynamic Loads

Simulating analysis of cantilever casting of prestressed concrete bridge

Numerical Simulation of Fracture and Damage Behaviour of Concrete at Different Ages

Numerical simulation of stress-strain state of oblique sections of reinforced concrete structures subjected to compression and bending on yielding supports under short-term dynamic load

Calculation of deflections of bent reinforced concrete elements on the basis of a nonlinear deformation model taking into account the forces of adhesion of reinforcement with concrete

Experimental and Numerical Investigation of Bond-Slip Behavior of High-Strength Reinforced Concrete at Service Load

Multi-Scale Simulation of Two-Dimensional Chloride Transport Under the Effect of Bending Load in Concrete

Lateral Stresses on Bond Strength of Deformed Steel Bars in Concrete: Analytical Model

Bond slip model for the simulation of reinforced concrete structures

Thermal deformation and stress of alkali-activated slag concrete under semi-adiabatic condition: Experiments and simulations

STUDY ON NUMERICAL SIMULATION TECHNOLOGY OF STEEL REINFORCED CONCRETE STRUCTURES USING ANSYS

Theoretical solution for bond-slip behavior of composite structures consisting of H-shape beam and concrete based on experiment, numerical simulation, and theoretical derivation