Abstract:Aerobreakup of fluid droplets under the influence of impulsively generated high-speed gas flow using an open-ended shock tube is studied using experiments and numerical simulations. Breakup of mm-sized droplets at high Weber number was analyzed for water and two-phase nanofluids consisting of dispersions of Al2O3 and TiO2 nanoparticles in water with high loading of 20 and 40 weight % respectively. Droplet breakup is visualized using high-speed imaging in the experimental setup, where an open ended shock tube generates impulsive high-speed flow impinging on a droplet held stationary using an acoustic levitator. Axisymmetric simulations using the Volume of Fluid technique are conducted to capture the gas dynamics of the flowfield and droplet deformation at the initial stages. Fluid droplets are subject to a transient flow field generated by the open ended shock tube, characterized by a propagating incident shock wave, a recirculating vortex ring, and standing shock cells. Droplet breakup for all fluids proceeds through an initial flattening of the droplet followed by generation of a liquid sheet at the periphery in the presence of a curved, detached shock front at the leading edge. The breakup appears to follow a sheet stripping process whereby stretched ligaments undergo secondary atomization through viscous shear. Mist generated in the wake of the droplet appears to expand laterally due to the unconstrained expansion of the high-speed gas jet. The breakup morphology of droplets for all fluids appears consistent with previous observations using conventional shock tubes. Lateral deformation of the coherent droplet mass is observed to be higher for nanofluids as compared to water. This is attributed to higher viscosity and Ohnesorge number of nanofluid droplets, which results in delayed breakup and increased lateral stretching.

The shattering of abrupt shear thickening suspension jet in an air-blast atomizer

Primary breakup of shear‐thickening suspension jet by an annular air jet

Macaroni-type Breakup in the Primary Breakup of Discontinuous Shear-Thickening Suspension

Inhibitory Effects of Convergent Annular Nozzles on the Primary Breakup of Discontinuous Shear-Thickening Suspensions

Droplet breakup in airflow with strong shear effect

Secondary breakup of shear thickening suspension drop

Coaxial Air Blast Atomization of a Particulate Gel Suspension Jet

Breakup of a liquid jet in co-flowing air streams

Linear instability analysis of a shear thinning gelled jet with yield stress in coaxial atomization

Breakup of particle-laden droplets in airflow

Similarity Between the Primary and Secondary Air-Assisted Liquid Jet Breakup Mechanisms

Experimental Study on Droplet Breakup in an Orifice Jet Mixer

Breakup Regime of Flashing Jet under Thermal Nonequilibrium and Mechanical Forces and Its Relationship with Jet Characteristics During Depressurized Releases of Superheated Liquid

The Breakup and Atomization of a Viscous Liquid Jet

Modeling Atomization of a Round Water Jet by a High-Speed Annular Air Jet Based on the Self-Similarity of Droplet Breakup

Breakup Morphology of Annular Liquid Sheet with an Inner Round Air Stream

Secondary breakup mechanisms of a jet-atomized liquid drop

Single and two-phase fluid droplet breakup in impulsively generated high-speed flow

Primary breakup characteristics of air-blast atomization of coal-water slurry

The Primary Breakup and Atomization Characteristics of Liquid Jet in Crossflow at the Fixed Momentum Ratio and Weber Number

Transition Weber Number Between Surfactant-Laden Drop Bag Breakup and Shear Breakup of Secondary Atomization