Abstract:Understanding of liquid jet breakup dynamics and spray formation in annular swirling crossflows is crucial to optimize the atomization and mixing of liquid fuels in gas turbine engine combustors. In this study, hybrid Eulerian-Lagrangian method is utilized for the simulation of spray atomization, which combines the Volume-of-Fluid method to capture the liquid-gas interface, and a Lagrangian droplet tracking approach to resolve the secondary breakup and the dilute spray cloud. Adaptive mesh refinement is adopted to cluster grid points around the liquid-gas interface. The liquid jet of fuel is injected radially outwards into the swirling air crossflow in an annular computational domain, while the swirling number varies from 0, 0.45 to 0.85. The breakup process and spray structures in the swirling flows are systematically compared with that in the non-swirling flow. It is found that column and surface breakup coexist in the studied cases. The column breakup is dominated by the amplified KH instability waves on the column surface. The liquid column breakup in a bag/shear mode, where holes are formed at the surface wave trough. It is first found that the azimuthal surface wave is greatly amplified in the swirling crossflow, which affects the column and surface breakup. The amplification and interactions of the axial and azimuthal surface waves on the transverse edges lead to the surface breakup. The forming ligaments are preferably connected with the axial surface wave crest. The penetration depth of jet column decreases a little in the swirling crossflow, while the droplets spread more outwardly downstream. The spray trajectory can be approximately described by the empirical models with case-sensitive coefficients. The angular deflection in the swirling flow is roughly linearly varied with axial distance. The PDFs of droplet sizes generally follow the log-normal distribution in the swirling crossflow.

Inhibitory Effects of Convergent Annular Nozzles on the Primary Breakup of Discontinuous Shear-Thickening Suspensions

Macaroni-type Breakup in the Primary Breakup of Discontinuous Shear-Thickening Suspension

Primary breakup of shear‐thickening suspension jet by an annular air jet

The shattering of abrupt shear thickening suspension jet in an air-blast atomizer

Influence of an Axial Flow on the Near-Field of Axisymmetric Dissemination of Liquid

Dynamic Analysis of the Primary Breakup of an Annular Energetic Liquid Jet Injecting into a Confined Space

Experimental Study on Breakup Characteristics of Hollow Cone Spray in Gas Crossflow

Breakup Morphology of Annular Liquid Sheet with an Inner Round Air Stream

The Primary Breakup and Atomization Characteristics of Liquid Jet in Crossflow at the Fixed Momentum Ratio and Weber Number

Breakup of a liquid jet in co-flowing air streams

Experiment on the Breakup of Round Liquid Jets in Cross Airflows

The Effect of Nozzle Structure and Initial State on the Primary Breakup of Diesel Spray

Experimental Study on Droplet Breakup in an Orifice Jet Mixer

Direct numerical simulation of sheet breakup formed by two impinging jets with non-Newtonian shear thinning properties

An Experimental Study on the In-Nozzle Cavitating Flow and Near-Field Breakup of Spirally Grooved Hole Nozzles

Multiscale Simulation of Liquid Jet Breakup in Swirling Crossflows: Breakup Mechanism and Spray Structures

Experimental Study on the Primary Breakup of Axisymmetrical Dissemination of Liquid in Motion

Similarity Between the Primary and Secondary Air-Assisted Liquid Jet Breakup Mechanisms

Breakup and atomization of annular flow jet in crossflow

Coaxial Air Blast Atomization of a Particulate Gel Suspension Jet

Linear instability analysis of a shear thinning gelled jet with yield stress in coaxial atomization