Abstract:Metal halide perovskite (MHP)-based phosphor-converted light-emitting diodes (pc-LEDs) are limited by the low MHP stability under storage/operation conditions. A few works have recently established the in situ synthesis of MHPs into polymer matrices as an effective strategy to enhance the stability of MHP with a low-cost fabrication. However, this is limited to petrochemical-based polymers. Herein, the first in situ ambient preparation of highly luminescent and stable MHP–biopolymer filters (MAPbBr3 nanocrystals as an emitter and poly(l-lactic acid) (PLLA) as the matrix) with arbitrary areas (up to ca. 300 cm2) is reported. The MAPbBr3–PLLA phosphors feature a narrow emission (25 nm) with excellent photoluminescence quantum yields (>85%) and stability under ambient storage, water, and thermal stress. This is corroborated in green pc-LEDs featuring a low-efficiency roll-off, an excellent operational stability of ca. 600 h, and high luminous efficiencies of 65 lm W–1 that stand out compared to the prior state of the art (e.g., an average lifetime of 200 h at 50 lm W–1). The filters are further exploited to fabricate white-emitting pc-LEDs with efficiencies of ca. 73 lm W–1 and x/y CIE color coordinates of 0.33/0.32. Overall, this work establishes a straightforward (one-pot/in situ) and low-cost preparation (ambient/room temperature) of highly efficient and stable MHP–biopolymer phosphors for highly performing and more sustainable lighting devices.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c04025?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c04025</a>.Comparison of the stability of MAPbBr3–PLLA–DCM and MAPbBr3–DCM solutions; transmittance spectra of the pure PLLA and MAPbBr3–PLLA films; additional HRTEM images; UV–vis absorption spectra; time-resolved emission decay curves; emission spectra; XPS spectra; α-step roughness results; SEM images and SEM-EDS mapping of films; photographs of fresh and 172 days old 150 μL MAPbBr3–PLLA films; temperature-dependent maximum emission wavelength and FWHM; tables about the emission properties of the prepared films; and direct comparison of the operational stability of the green pc-LEDs as well as the in situ fabricated MHPs polymers (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c04025/suppl_file/am1c04025_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Facile synthesis of perovskite phosphors and nanocrystals using laundry detergent by ultra-rapid freezing for light-emitting diodes application

Efficient Flexible Inorganic Perovskite Light-Emitting Diodes Fabricated with CsPbBr3 Emitters Prepared Via Low-Temperature in Situ Dynamic Thermal Crystallization

Efficient Solid-State Electrochemiluminescence from High-Quality Perovskite Quantum Dot Films.

Unraveling the Ultrasonic-Assisted Synthesis of Green-Emitting CsPbBr3@Cs4PbBr6: Reaction Process, Luminescence Property, and Display Application

Giant efficiency and color purity enhancement in multicolor inorganic perovskite light-emitting diodes via heating-assisted vacuum deposition

Room-temperature synthesis of perovskite-phase CsPbI3 nanocrystals for optoelectronics via a ligand-mediated strategy

Cs4PbBr6/CsPbBr3 Perovskite Composites with Near-Unity Luminescence Quantum Yield: Large-Scale Synthesis, Luminescence and Formation Mechanism, and White Light-Emitting Diode Application.

Facile low-temperature solid-state synthesis of efficient blue-emitting Cs3Cu2I5 powder phosphors for solid-state lighting

Highly Efficient Mn-doped CsPb(Br/Cl)3 Mixed-Halide Perovskite Via a Simple Large-Scale Synthesis Method

Suppression of temperature quenching in perovskite nanocrystals for efficient and thermally stable light-emitting diodes

In Situ Fabrication of Mn‐Doped 2D Perovskite‐Polymer Phosphor Films with Green‐Red Dual Emissions for Yellow Lighting

One-step low-temperature solid-state synthesis of lead-free cesium copper halide Cs3Cu2Br5 phosphors with bright blue emissions

Solvent-Free Synthesis of Stable Heterostructured-CsPbBr3/Cs2PbBr5 Assisted by SiO2 for White Light-Emitting Diodes

Highly luminescent lead bromine perovskite via fast and eco-friendly water-assisted mechanochemical method

Low-Cost Synthesis of Highly Luminescent Colloidal Lead Halide Perovskite Nanocrystals by Wet Ball Milling

Solvent-Free in Situ Synthesis of a CsPbBr3 Nanocrystal/ZrO2 Hybrid Phosphor with Excellent Thermal Stability for White Light-Emitting Diodes

Rapid Large-Scale Synthesis of Highly Emissive Solid-State Metal Halide Perovskite Quantum Dots Across the Full Visible Spectrum

Direct Hot-Injection Synthesis of Lead Halide Perovskite Nanocubes in Acrylic Monomers for Ultrastable and Bright Nanocrystal-Polymer Composite Films

Anti‐Solvent Synthesis of Three‐Color Indium‐Based Halide Perovskite Microplate/Microcrystal Phosphors for High Color Rendering WLEDs

In Situ Preparation of Metal Halide Perovskite Nanocrystal Thin Films for Improved Light-Emitting Devices

In Situ Ambient Preparation of Perovskite-Poly( l -lactic acid) Phosphors for Highly Stable and Efficient Hybrid Light-Emitting Diodes