Abstract:In recent years, perovskite quantum dots (PQDs) with the incorporation of transition-metal ions for reducing toxicity and enhancing stability have been in a research hotspot. However, the PQDs containing transition-metal ions are quite unstable and display low photoluminescence quantum yields (PLQYs), owing to the existence of defects. Herein, we have endeavored to introduce simultaneous cation and anion exchange with cobalt and chloride ions into the host CH3NH3Pb1–xCoxBr3–2xCl2x PQDs followed by matrix encapsulation via poly(methyl methacrylate) (PMMA) as a favorable approach to stabilize PQDs with improved PLQY. We have utilized cobalt chloride as the precursor for doping ions. The emission wavelength can be regulated from green to cyan color with the increase in doping concentration without negotiating on color quality, which is believed to be the modification of band gap and corresponding electron density estimated from the density functional theory. A high PLQY of 95% is observed even after the incorporation of cobalt and chloride ions into host PQDs. We demonstrate white light-emitting diode (LED) prototypes for backlight applications using a PQDs/PMMA composite on a blue LED chip, which exhibits excellent stability toward an ambient and robust atmosphere and provides a wide-color gamut of 124% of the NTSC standard. This research paves a way for the research community to synthesize highly efficient, color-tunable PQDs for wide-color backlighting applications.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsanm.0c03019?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsanm.0c03019</a>.Photographs of a MAPb1–xCoxBr3–2xCl2x perovskite precursor without and with ligands (Figures S1 and S2); photographs of MAPb1–xCoxBr3–2xClx perovskite quantum dots and thin films (Figures S3 and S4); XRD of the MAPb1–xCoxBr3 (Figure S5) PQDs and MAPbBr3: x (MACl) (Figure S6); polyhedral representation of MAPbBr3 and MAPb1–xCoxBr3–2xClx (Figure S7–S12); variation in the lattice constant, strain, and cell volume of MAPb1–xCoxBr3–2xClx (Table S1, Figures S13 and S14); PL emission and band gap of MAPb1–xCoxBr3 and MAPb1–xCoxBr3–2xCl2x PQDs (Figures S15 and S16); variation of radiative rate (KR), nonradioactive transition rate (KNR), and KR/KNR of MAPb1–xCoxBr3–2xCl2x PQDs (Figure S17); elemental mapping (Figure S18); DFT simulation results of MAPbBr3 and MAPb1–xCoxBr3–2xCl2x PQDs (Figure S19); PL spectra of MAPbBr3 and MAPb1–xCoxBr3–2xCl2x PQDs (Figure S20); PL emissions of PQDs: PMAA and MAPb1–xCoxBr3–2xCl2x QDs/PMMA sheets (Figures S21 and S22); comparative PL spectra of PQD solution and PQDs/PMMA sheets (Figure S23); variation of the color coordinate, purity, 3D scan of emission spectroscopy, electroluminescence spectra, and digitized image for cobalt-ion-doped MAPbBr3 PQDs in PMMA (Figure S24); emission of undoped and doped MAPbBr3 thin films on blue LEDs (Figures S25–S27); color gamut of obtained white LEDs for undoped/doped and unencapsulated/encapsulated MAPbBr3 PQDs (Figure S28) (<a class="ext-link" href="/doi/suppl/10.1021/acsanm.0c03019/suppl_file/an0c03019_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

In Situ Ambient Preparation of Perovskite-Poly( l -lactic acid) Phosphors for Highly Stable and Efficient Hybrid Light-Emitting Diodes

Highly Stable Waterborne Luminescent Inks Based on MAPbBr 3 @PbBr(OH) Nanocrystals for LEDs and Anticounterfeit Applications

Reproducible One-Step Fabrication of Compact MAPbl(3-x)Cl(x) Thin Films Derived from Mixed-Lead-Halide Precursors

Stable and Bright Formamidinium-Based Perovskite Light-Emitting Diodes with High Energy Conversion Efficiency.

Improving the Performance and Stability of Perovskite Light-Emitting Diodes by a Polymeric Nanothick Interlayer-Assisted Grain Control Process

MAPbBrxCl3-x quantum dots in Pb(OH)Br for stable blue light-emitting devices

In Situ Fabrication of Mn‐Doped 2D Perovskite‐Polymer Phosphor Films with Green‐Red Dual Emissions for Yellow Lighting

CH 3 NH 3 Pb 1– x Co x Br 3–2 x Cl 2 x Perovskite Quantum Dots for Wide-Color Backlighting

Highly Emissive and Color-Tunable Perovskite Cross-linkers for Luminescent Polymer Networks

In-Situ Formed Type I Nanocrystalline Perovskite Film for Highly Efficient Light-Emitting Diode

One‐Step Polymeric Melt Encapsulation Method to Prepare CsPbBr 3 Perovskite Quantum Dots/Polymethyl Methacrylate Composite with High Performance

Efficient All-Inorganic Perovskite Light-Emitting Diodes Enabled by Simultaneous Growth Regulation and Defect Passivation

Side-Chain-Promoted Polymer Architecture Enabling Stable Mixed-Halide Perovskite Light-Emitting Diodes

Highly luminescent MAPbI3 perovskite quantum dots with a simple purification process via ultrasound-assisted bead milling

High Photoluminescence Quantum Yield (>95%) of MAPbBr 3 Nanocrystals via Reprecipitation from Methylamine-MAPbBr 3 Liquid

Thermal polymerization synthesis of CsPbBr3 perovskite-quantum-dots@copolymer composite: Towards long-term stability and optical phosphor application

Light-Emitting Diodes with Manganese Halide Tetrahedron Embedded in Anti-Perovskites

In situ and General Multidentate Ligand Passivation Achieves Efficient and Ultra‐Stable CsPbX3 Perovskite Quantum Dots for White Light‐Emitting Diodes

Highly stable CsPbBr3/ PMA perovskite nanocrystals for improved optical performance

High-efficiency Histamine-in-based Halide Phosphors with Excellent Thermal Stability

In-situ stabilization strategy for CsPbX3-Silicone resin composite with enhanced luminescence and stability