Abstract:Stainless steel is an important material used in many applications due to its mechanical strength and corrosion-resistant properties. The high corrosion resistance of stainless steel is provided by the passive film. Different stainless steels have different alloy elements and surface properties which could have a significant influence on bacterial attachment to the surface and thus might result in different microbial corrosion behaviours. In this study, the effect of adhesion of sulfate-reducing bacteria (SRB) on corrosion behaviour in artificial seawater on different stainless steels was investigated. Stainless steel materials used were SS 410, SS 420, SS 316 and DSS 2205 and pure chromium. The contact angle was measured to study the effect of surface properties of materials. Adhesion was measured by counting cells attached to the surface of materials. The corrosion behaviour of the materials was measured by electrochemical testing including measuring open circuit potential, electrochemical impedance spectroscopy and potentiodynamic behaviour. The long-term corrosion behaviour of each material was studied after six months of exposure by measuring weight loss and surface analysis with scanning electron microscope with energy-dispersive X-ray analysis. Hydrophobicity had a strong effect on bacterial attachment. Alloying elements e.g. nickel also had shown its ability to attract bacteria to adhere on the surface. However, the corrosion rate of different materials is determined not only by bacterial attachment but also by the stability of the passive film which is determined by the alloying elements, such as Mo and Cr. Chromium showed high resistance to corrosion, possibly due to toxicity on bacterial attachment. The nature of bacterial attachment and corrosion behaviour of the materials are discussed.

Bacterial adhesion and corrosion behavior of different pure metals induced by sulfate reducing bacteria

Corrosion behavior of 09Cr2AlMoRE steel in seawater with sulfate-reducing bacteria

Corrosion Behavior of Cupronickel Alloy in Simulated Seawater in the Presence of Sulfate-Reducing Bacteria

A study of bacteria adhesion and microbial corrosion on different stainless steels in environment containing Desulfovibrio vulgaris

Effect of Sulfate Reduced Bacterium on Corrosion Behavior of 10crmoal Steel

Surface roughness influence on extracellular electron microbiologically influenced corrosion of C1018 carbon steel by Desulfovibrio ferrophilus IS5 biofilm

Corrosion behavior of B10 copper-nickel alloy beneath a deposit caused by sulfate-reducing bacteria with carbon source starvation in marine environments

Biocorrosion Characteristics of the Copper Alloys BFe30-1-1 and HSn70-1AB by SRB Using Atomic Force Microscopy and Scanning Electron Microscopy

Studies on Sulfate Reducing Bacteria Influenced Corrosion of 90/10 Cu/Ni Alloy

Corrosion Behavior of Copper under Biofilm of Sulfate-Reducing Bacteria

A comparative study of the corrosion of Q235 carbon steel in six different strains of marine-isolated sulfate reducing prokaryote

Influence of Sulfate-Reducing Bacteria on Corrosion Behavior of EQ70 High-Strength Steel

The influence of sulphate‐reducing bacteria on heterogeneous electrochemical corrosion behavior of Q235 carbon steel in seawater

Effects of ferrous ion concentration on microbiologically influenced corrosion of carbon steel by sulfate reducing bacterium Desulfovibrio vulgaris

CORROSION ACTION OF SULFATE-REDUCING BACTERIA ON TWO STAINLESS STEELS

Effect of One Sulfate-Reducing Bacterium SRB-Z Isolated from Pearl River on the Corrosion Behavior of Q235 Carbon Steel

Effects of Sulfate-Reducing Bacteria on the Corrosion Behavior of Carbon Steel

INFLUENCE OF SULFATE REDUCING BACTERIA ON CORROSION BEHAVIOR OF HSn70-1A ALLOY

Effects Of Sulfate-Reducing Bacteria on Corrosion of Carbon Steel Q235 in the Crevice by EIS