3D‐Printed Hollow Microneedle‐Lateral Flow Devices for Rapid Blood‐Free Detection of C‐Reactive Protein and Procalcitonin

Joseph G. Turner,Emily Lay,Ute Jungwirth,Valentyna Varenko,Harinderjit S. Gill,Pedro Estrela,Hannah S. Leese
DOI: https://doi.org/10.1002/admt.202300259
IF: 6.8
2023-05-06
Advanced Materials Technologies
Abstract:Stereolithography‐based 3D printing can be used for the direct fabrication of biocompatible hollow microneedles, capable of effective skin penetration and extraction of interstitial fluid. These hollow microneedles can be designed for easy integration of lateral flow devices for multianalyte detection, resulting in a low‐cost skin patch for rapid, blood‐free diagnostics. Hollow microneedle devices as a technology for interstitial fluid extraction show promise for the minimally invasive point‐of‐care detection of analytes. Despite increasing efforts toward on‐patch diagnostics, the use of hollow microneedles has been limited due to the complexity caused by integrating hollow microneedles with established point‐of‐care diagnostic techniques. Herein, a 3D printing method is utilized, to provide low‐cost manufacturing of custom‐designed hollow microneedle devices, allowing for easy integration with lateral flow assays for rapid and blood‐free diagnostics. Microneedle surface modification through PEGylation results in prolonged and enhanced hydrophilicity, enabling passive uptake of small volume samples (≈22.5 μL) and an enhanced shelf life. The hollow microneedle devices are deemed non‐cytotoxic to cell types found within the skin following short‐term and prolonged exposure in accordance with ISO10993. Furthermore, the devices demonstrate high mechanical strength and successfully penetrate porcine skin grafts without damaging the surrounding skin morphology. This work also demonstrates for the first time the use of hollow microneedles for the simultaneous detection, at clinically relevant concentrations, of C‐reactive protein (LoD = 10 μg mL−1) and procalcitonin (LoD = 1 ng mL−1), through porcine skin, ultimately demonstrating the beneficial use of manufactured 3D‐printed hollow microneedles towards low‐cost blood‐free diagnostics of inflammation markers.
materials science, multidisciplinary
What problem does this paper attempt to address?