Abstract:Energy consumption, environmental issues, product quality are actual problems related to grain drying processes. It is necessary to pay attention to designing new structures of energy-efficient grain dryers. A structure of an energy-efficient grain dryer based on thermosiphons has been designed; its energy consumption is 3.5...6.8 MJ/kg depending on surface temperature and air flow rate. The dryer includes a layer heater, a drying chamber, a heat generator, a heater, a noria for loading the product, and fans. The structural features of the dryer allow the drying process to be carried out without direct contact between the combustion gases and the product. The efficiency of the designed structure was evaluated for such indicators as heat transfer coefficients to the grain flow, specific energy costs, moisture content, the relative humidity of the air leaving the dryer. The values of coefficients of the heat transfer to the grain flow vary within 36...58 W/m2K at speeds 2.5...8 mm/s. An increase in the flow rate by 3.2 times leads to an increase in the heat transfer coefficient by 1.6 times. The moisture content of the air at the outlet of the dryer reaches 60 g/kg, while the relative humidity is 90 %, which is several times higher than the parameters for convective mine grain dryers. Energy consumption for drying at the surface temperature of thermosiphons Ts=142.9 °C for various grain flow rates is close to a minimum. The energy consumption is lower than in existing convective dryers. 21 % is spent on heating grain in the dryer; 54 % ‒ on moisture evaporation; and 23.6 % are losses. If we consider the energy spent on moisture evaporation usable, the efficiency of convective dryers is only 40 % while that of dryers based on thermosiphons is 54.1 %. It is expected that the designed structure could be a solution for small farmers in the post-harvest drying process

Convective hot air drying of grapes: drying kinetics, mathematical modeling, energy, thermal analysis

Enhancement of grapes convective drying by application of different airflow direction techniques

Designing the structure and determining the mode characteristics of the grain dryer based on thermosiphons

Optimal Design of an Angular Box for a Mixed Flow Grain Dryer

Experimental investigation, performance analysis, and optimization of hot air convective drying of date fruits via response surface methodology

Optimum Air Velocity, Air Temperature and Maize Layer Thickness for Highest Moisture Removal Rate and Drying Efficiency in a Forced Convection Grain Dryer

Drying kinetics, mass transfer parameters, and specific energy consumption analysis of watermelon seeds dried using the convective dryer

Drying kinetics and quality of Monukka seedless grapes dried in an air-impingement jet dryer

Modeling and Experimental Study on Drying Characteristics of Corn Particles with Hot Air in Downward Moving Bed

Heat pump drying of grape pomace: Performance and product quality analysis

Experimental and Theoretical Assessment of a Solar Assisted Heat Pump System for In-Bin Grain Drying: A Comprehensive Case Study

Experimental Investigation on a Solar Assisted Heat Pump In-Store Drying System

Effect of drying kinetics model on energy efficiency of drying systems

Drying Characteristics, Kinetic Modeling, Energy and Exergy Analyses of Water Yam (Dioscorea alata) in a Hot Air Dryer

Drying Kinetics and Performance Analysis of Thermal Storage-Based Hybrid Greenhouse Dryer for Uniform Drying of Tomato Flakes

Thermal Performance of Indirect Forced Convection Solar Dryer and Kinetics Analysis of Mango

SIMULATION AND ANALYSIS OF HEAT PUMP DRYING IN-STORE DRYING

Drying kinetics of nectarine slices in a heat pump drying system

Drying kinetics and energy analysis of carob seeds (Ceratonia siliqua L.) convective solar drying

Mathematical modelling of convection drying of green table olives

The mathematical modeling of changes in grain moisture and heat loss on adsorption drying from parameters of grain dryer