Enhancement of grapes convective drying by application of different airflow direction techniques

Hany S. EL-Mesery,Reham M. Kamel,W. G. Alshaer
DOI: https://doi.org/10.1007/s00231-022-03288-x
2022-09-13
Abstract:Due to its straightforward and practical design, the convective drier is the most widely used drying technology. A drying chamber's uniform airflow distribution is important because it significantly impacts the drier's effectiveness and the dried materials' homogeneity. This study aimed to evaluate the experiment of drying grapes that applied three different air distribution techniques: a vertical airflow system (VT) and two horizontal airflow systems (HT-I and HT-II) inside convection dryers. Experiments were conducted using a forced convection dryer at temperatures from 40 °C to 60 °C and air velocities range of 1.0 to 2 m/s to dried grapes. The drying time was significantly decreased due to the greater air temperature and velocity under different dryers. The horizontal airflow technique (HT-II) exhibited the lowest significant drying time reduction of 3.79% and 8.46% lower than the horizontal (HT-I) and vertical airflow techniques, respectively. The highest thermal efficiency was achieved in the (HT II) technique in the range from 50.31% to 74.52% compared to the (VT) technique, and it was the least efficient in the range (29.77–52.45). The minimum specific energy consumption of 27.44 MJ/kg was recorded using the horizontal (HT-II) technique, which was 53.82% and 141.91% lower than horizontal (HT-I) and vertical, respectively. Additionally, implementing the horizontal (HT-II) technique for drying grapes has many advantages over the vertical (VT) technique, including faster operating times, lower overall energy consumption, and improved dryer's thermal efficiency.
What problem does this paper attempt to address?