Abstract:The fabrication of functional multilayered conjugated-polymer structures with well-defined organic-organic interfaces for optoelectronic-device applications is constrained by the common solubility of many polymers in most organic solvents. Here, we report a simple, low-cost, large-area transfer-printing technique for the deposition and patterning of conjugated-polymer thin films. This method utilises a planar poly(dimethylsiloxane) (PDMS) stamp, along with a water-soluble sacrificial layer, to pick up an organic thin film (similar to 20 nm to 1 mu m) from a substrate and subsequently deliver this film to a target substrate. We demonstrate the versatility of this transfer-printing technique and its applicability to optoelectronic devices by fabricating bilayer structures of poly(9,9-di-n-octylfluorene-alt-(1,4-phenylene-((4-sec-butylphenyl)imino)-1,4-phenylene))/poly(9,9-di-n-octylfluorene-alt-benzo-thiadiazole) (TFB/F8BT) and poly(3-hexylthiophene)/methanofullerene([6,6]-phenyl C-61 butyric acid methyl ester) (P3HT/ PCBM), and incorporating them into light-emitting diodes (LEDs) and photovoltaic (PV) cells, respectively. For both types of device, bilayer devices fabricated with this transfer-printing technique show equal, if not superior, performance to either blend devices or bilayer devices fabricated by other techniques. This indicates well-controlled organic-organic interfaces achieved by the transfer-printing technique. Furthermore, this transfer-printing technique allows us to study the nature of the excited states and the transport of charge carriers across well-defined organic interfaces, which are of great importance to organic electronics.

Rapid Meniscus-Assisted Solution Printing of Large-Area Stripe Arrays of Highly Oriented Conjugated Polymers for Field-Effect Transistors

Rapid Meniscus‐Assisted Solution‐Printing of Conjugated Block Copolymers for Field‐Effect Transistors (adv. Funct. Mater. 14/2022)

High Electrical Conductivity and Carrier Mobility in Ocvd PEDOT Thin Films by Engineered Crystallization and Acid Treatment

Large-Scale Patterning and Polymorph Transition of Conjugated Polymers via Meniscus-Guided Deposition for Field-Effect Transistors

Meniscus-Assisted Solution Printing Enables Cocrystallization in Poly(3-alkylthiophene)-based Blends for Field-Effect Transistors

Large‐Scale Rapid Positioning of Hierarchical Assemblies of Conjugated Polymers Via Meniscus‐Assisted Self‐Assembly

Transforming Polymorphs Via Meniscus-Assisted Solution-Shearing Conjugated Polymers for Organic Field-Effect Transistors.

Anisotropic Charge-Carrier Transport in High-Mobility Donor-Acceptor Conjugated Polymer Semiconductor Films.

Achieving High Alignment of Conjugated Polymers by Controlled Dip‐Coating

Direct Writing of Aligned Conjugated Polymer Micro-Ribbons for High-Performance Organic Electronics

Meniscus-assisted Solution Printing of Large-Grained Perovskite Films for High-Efficiency Solar Cells.

Efficient Conjugated-Polymer Optoelectronic Devices Fabricated by Thin-Film Transfer-Printing Technique

Solution Adsorption Formation of a Π‐conjugated Polymer/Graphene Composite for High‐Performance Field‐Effect Transistors

Semiconducting Polymer Nanowires with Highly Aligned Molecules for Polymer Field Effect Transistors

Scalable, Alternating Narrow Stripes of Polyvinyl Alcohol Support and Unmodified PEDOT:PSS with Maintained Conductivity Using a Single-Step Slot Die Coating Approach

Channel-restricted Meniscus Self-Assembly for Uniformly Aligned Growth of Single-Crystal Arrays of Organic Semiconductors

Synthesis, characterization, and efficient electrohydrodynamic patterning with a high aspect ratio of a soluble oligomerpyrrole derivative

Controlling Aggregation and Crystallization of Solution Processed Diketopyrrolopyrrole Based Polymer for High Performance Thin Film Transistors by Pre-Metered Slot Die Coating Process

Stepwise Aggregation Control of PEDOT:PSS Enabled High-Conductivity, High-Resolution Printing of Polymer Electrodes for Transparent Organic Phototransistors

Facile Direct Printing of DPP-Based Polymers for Organic Field-Effect Transistors and Logic Gates

Controlled Self-Assembly of Conjugated Polymers via a Solvent Vapor Pre-Treatment for Use in Organic Field-Effect Transistors