Abstract:For improving the night recognition of road markings and enhancing the driving safety of asphalt pavements, single-factor optimization is used to investigate the effects of the component materials, including luminescent power, pigment, filler, and anti-sedimentation agent, on the luminous performance of a coating. Additionally, their composition ratios are optimized using response surface methodology. A phosphorescent marking coating is prepared to investigate the micromorphology, excitation, and emission properties using scanning electron microscopy (SEM) and molecular fluorescence spectroscopy (MFS). The optimum thickness of the coating on an asphalt pavement is investigated, and the durability of the coating on asphalt pavement using a wheel rutting test is evaluated. The results show that the 300 mesh yellow-green luminous powder has the optimal overall performance, with an initial luminescence that exceeds that of orange and sky blue by three times. Initial brightness is mainly influenced by aluminate luminescent powder (ALP), which increases with the dosage. ALP and fumed silica powder (FSP) have a positive effect on brightness after centrifugation, and the effect of FSP dosage is more significant. ALP, rutile titanium dioxide powder (RTDP), and FSP influence the wear value of the coating, and the magnitude of the effect is RTDP > FSP > ALP. The optimal dosages of the main component are 27% ALP, 5% RTDP, and 0.8% FSP. The results of SEM show that the components in the coating are evenly dispersed, and the surface of the coating is rough. The peak excitation wavelength of 420 nm means that the coating has the best excitation effect in UV light, and its emission spectrum in the 440–760 nm wavelength range is well within the sensitive recognition zone of the human eye. The initial brightness gradually reached 4.38 cd/m2 when the coating thickness was increased from 482 μm to 546 μm, and the optimal application thickness of the luminous coating was determined to be 500 μm. At high and normal temperatures, the rutting stripping rates of the luminous marking coating are 16.8% and 8.2%, indicating its satisfactory durability. This study provides an experimental basis for the ratio optimization design of a luminous coating for asphalt pavements.

The Development and Application of Preformed Pavement Marking Tape

The Development and Application of Road Marking Materials in Our Country

Performance, Environmental Impact and Cost Analysis of Marking Materials in Pavement Engineering, The-State-of-art

Test Technology for Preformed Pavement Marking Tape

Study on Air-Purifying Performance of Semi-Flexible Asphalt Samples Coated with Titanium Dioxide Using Different Methods

Assessing Performance of Alternative Pavement Marking Materials

Study on the Reflective Principle and Long-Term Skid Resistance of a Sustainable Hydrophobic Hot-Melt Marking Paint

A novel method for evaluating the durability and environmental pollution of road markings on asphalt pavement

Preparation and characterization of luminescent road-marking paint

Performance Evaluation of Pavement Markings Under Dry, Wet, and Rainy Conditions in the Field

Investigation on the technical performance and workability of hot-melting road marking materials using for the high-altitude area

Performance Evaluation of No Track Thermoplastic Traffic Markings

Preparation and Performance Characterization of an Active Luminous Coating for Asphalt Pavement Marking

Development and Optimization of Ultimate Performance Self-Levelling Epoxy Asphalt Concrete (USEA) for Prefabricated Deck Pavement

Research on Preparation and High Temperature Behavior of High-Modulus Asphalt

Preparation and Properties of New Thermal Reflective Coating for Asphalt Pavement

THE INFLUENCE OF THE TYPE, STRUCTURE AND CONDITION OF ROAD COATING ON THE OPERATING PROPERTIES OF HORIZONTAL ROAD MARKING

Influence of construction technology on the retroreflective performance of two-component traffic marking

Pavement Marking Practices, Standards, Applications, and Retroreflectivity

Analysis and Application of New-Type High Performance Cold-Patch Mixture for Pavement

Investigation on the Preparation and Performances of Epoxy-Modified Asphalt Binder and Its Mixtures