Abstract:Clarifying the influences of anchorage parameters on rock mass deformation and failure under impact dynamic load is the key to the control of surrounding rock in rock burst roadways. However, the existing research mainly focuses on the influence of anchorage parameters on rock mass deformation and failure under static load. However, the research on the dynamic failure mechanism of rock mass remains insufficient. According to the deformation and failure characteristics of anchor structure in practical engineering, the dynamic response law of the anchored rock mass under lateral impact load was studied through indoor similar physical model tests. Besides, the effects of anchor material, prestress and anchorage method on crack propagation mode and dynamic mechanical characteristics of anchored rock mass were analyzed. The lateral impact mechanical model of the anchored rock mass was established. Furthermore, rational suggestions on anchorage support in deep rock burst roadways were put forward based on the impact failure mechanism of prestressed anchored rock mass. The following research results were yielded: Under impact load, the cracks of the anchored rock mass are concentrated around the impact point, and the rock sample mainly undergoes shear failure and tensile failure. The size of cracks is controlled by the anchor material, the anchoring method and the prestress level. The axial force of the bolt increases with the increase of steel strength. The axial force platform segments of HRB400, HRB500, and CRM700 bolts are 20.84kN, 20.95kN, and 45.65kN, respectively. The material of the bolt has a significant impact on the impact resistance of the rock mass. The high strength of the bolt increases the stiffness of the anchored rock mass, and the impact force and axial force of the bolt are more sensitive to the impact load. When the pre-stress of the bolt increases from 15 to 45kN, the impact force action time decreases from 47 to 16ms, and the impact force platform value increases from 24.54 to 30.60kN. The impact force change is not significant, but the impact force action time changes more significantly. High pre-stress can improve the deformation resistance of the rock mass, but it will reduce the bearing capacity and impact resistance of the anchor structure. There is also a significant difference in the axial force of the bolt between the full length anchoring and end anchoring methods. The axial force of the bolt under the full-length anchoring method shows a slow increasing trend, and the axial force of the bolt under end anchoring is similar to its static load mechanical characteristic curve. compared with end anchorage, the rock mass is of greater stiffness and deforms less severely under full-length anchorage; meanwhile, the bolt can absorb massive energy through its elongation, but it tends to break under dynamic load. For deep rock burst roadways, it is suggested to choose "three-high" bolts (cables) as the supporting material, reduce the dynamic and static loads of surrounding rock and improve the mechanical properties of surrounding rock, to weaken the influence of dynamic load on the supporting structure of the anchored surrounding rock. The research results provide some theoretical guidance for the design of anti-burst bolt support in deep rock burst roadways.

Mechanical anchoring mechanism of prestressed bolt for rock-coal-bolt combination under uniaxial compression

Tensile Bearing Performance and Mechanical Transfer Mechanism of Coal-Rock Composite Anchor Bodies Under Different Height Ratios of Rock to Coal

Laboratory and field investigations of different bolting configurations for coal mine roadways in weak coal strata

Experimental investigation on bolted rock mass under static-dynamic coupled loading

Mechanical Behavior of Anchored Rock with an Infilled Joint under Uniaxial Loading Revealed by AE and DIC Monitoring

Mechanical Behavior of 2G NPR Bolt Anchored Rock Samples under Static Disturbance Loading

Mechanical Properties and Failure Mechanism of Anchored Bedding Rock Material under Impact Loading

Influence of anchorage length and pretension on the working resistance of rock bolt based on its tensile characteristics

Experimental study on lateral impact resistance of the prestressed anchored rock mass

Anchorage performance of a new rebar bolt under different surrounding rock strength and borehole depth

Study on the anchorage mechanism and roof stability control technology of bolts in fractured or weak surrounding rock

Experimental study of axial stress distribution and transfer along the bolt rods in an underground coal mine

Experimental Research on the Mechanical Performance of the Bolted Rock under Lateral Impact Load: Effect of Prestress, Body Material, and Anchorage Style

Experimental investigation on rockburst behavior of the rock-coal-bolt specimen under different stress conditions

The Mechanism of Rockbolts in Jointed Rock under Uniaxial Tension

Experimental Study on the Mechanical Behavior of Rock Bolts Subjected to Complex Static and Dynamic Loads

DEM Investigation of Rock/bolt Mechanical Behaviour in Pull-out Tests

Full-Stress Anchoring Technology and Application of Bolts in the Coal Roadway

Experimental study on mechanical properties of fractured rock mass under different anchoring modes

Rock bolts under cyclic loading: Mechanical performance and damage assessment by acoustic emissions

Investigation on mechanical behavior of pre-tensioned bolt in fractured rock mass using Continuum Discontinuum Element Method(CDEM)