Abstract:International Journal of Damage Mechanics, Ahead of Print. Pre-stressed anchor bolts serve as an effective means to reinforce fractured rock masses. The long-term efficacy of their anchoring function significantly impacts the safety throughout the entire lifecycle of rock engineering projects. Over time, fractured rock masses undergo creep deformation, which interacts synergistically with the time-dependent changes in the pre-stress of anchor bolts. In this work, we conduct uniaxial tensile tests and tensile creep tests on fractured rock specimens anchored by pre-stressed bolts, analyzing the coordinated deformation between the pre-stressed anchor bolts and the fractured specimens. Firstly, conventional uniaxial tensile tests were conducted on the pre-stressed anchorage specimen. The study found that the tensile strength of the anchored specimens was significantly higher than that of the unanchored specimens. Additionally, the ability of the specimens to withstand tensile stresses and deformation improved as pre-stress increased. Secondly, uniaxial tensile creep tests were conducted on the prestressed anchored specimens. The results indicate that, as the stress level increases, the creep strain continues to increase. The application of prestress can effectively limit the tensile deformation of the specimen and delay its damage time. The greater the pre-stress, the smaller the instantaneous strain and creep strain rate during the graded loading test. Finally, based on the synergistic deformation of pre-stressed anchor bolts and the creeping rock mass, we establish a constitutive model reflecting the creep properties of fractured rock mass and derive a theoretical viscoelastic creep formula for anchored rock mass under uniaxial tension. Comparing the creep model with the test results shows that this model is highly applicable and accurate in verifying the tensile creep deformation of prestressed anchorage specimens.

Investigation on mechanical behavior of pre-tensioned bolt in fractured rock mass using Continuum Discontinuum Element Method(CDEM)

Experimental and numerical investigations on mechanical property and reinforcement effect of bolted jointed rock mass

Investigation into the time-dependent mechanical behavior of pre-stressed anchor bolts and fractured rock specimens under synchronized tensile loads

Strength, deformation and failure behavior of bolted rock-like specimen with multiple cracks under uniaxial compression by particle flow simulation

Development of a Unified Rock Bolt Model in Discontinuous Deformation Analysis

Experimental Study on the Mechanical Behavior of Rock Bolts Subjected to Complex Static and Dynamic Loads

Coupling Analysis for Rock Mass Supported with CMC or CFC Rockbolts Based on Viscoelastic Method

Stability Analysis of Huge Underground Cavern Group in Jointed Rockmass

Study On The Failure Process Of Rock Masses Using The Discontinuous Deformation And Displacement (Ddd) Method

Experimental and numerical investigation on the mechanical responses and cracking mechanism of 3D confined single-flawed rocks under dynamic loading

Study on the Reinforcement Mechanism of Grouted Bolts with or Without Prestress Via the Hybrid DEM-FDM Method

DEM Investigation of Rock/bolt Mechanical Behaviour in Pull-out Tests

Study of Reinforcement Effect of Anchored Rock Masses and Analytic Constitutive Equation for Rock Bolt

Mechanical anchoring mechanism of prestressed bolt for rock-coal-bolt combination under uniaxial compression

Study on Shear Mechanism of Bolted Jointed Rocks: Experiments and CZM-Based FEM Simulations

Shear Behavior of Bolt-Reinforced Joint Rock Under Varying Stress Environment

Study on the mechanical response and failure behavior of the rock-like material with hole-bolt composite structure

Simulation of the Nonlinear Mechanical Behaviors of Jointed Rock Masses Based on the Improved Discontinuous Deformation and Displacement Method

Numerical Simulation Analysis on Anchored Shear Test of the Fractured Rock and the Slope Rock Mass

An experimental study on fracture evolution mechanism of a non-persistent jointed rock mass with various anchorage effects by DSCM, AE and X-ray CT observations

Mechanical Behavior of Anchored Rock with an Infilled Joint under Uniaxial Loading Revealed by AE and DIC Monitoring