Effect of Fluoroalcohol Chain Extension Modified HTPB Binder on the Combustion Performance of Aluminized Propellants

Yanjie Huang,Kanghua Chang,Jie Yao,Xueyong Guo,Chen Shen,Shi Yan

DOI: https://doi.org/10.3390/cryst14030258

IF: 2.7

2024-03-06

Crystals

Abstract:To enhance both the mechanical properties of hydroxyl-terminated polybutadiene (HTPB) binder and the combustion efficiency of aluminized propellants, 2,2,3,3,4,4,5,5-octafluoro-1,6-hexanediol (OFHD) was employed as a chain extender to impart mechanical regulation to the HTPB binder. Mechanical testing showed that the mechanical properties of fluoride-modified HTPB polyurethane (FPU) were significantly improved: the peak tensile strength of the optimized samples reached 1.99 MPa, and the elongation at break attained 486%. The structural characterization of the FPUs was conducted using Fourier transform infrared (FTIR) spectroscopy. Thermogravimetry-mass spectrometer (TG-MS) analysis revealed that the initial thermal decomposition temperature of the FPU shifted from 170 °C to 162 °C, accompanied by the release of fluorine-containing fragments during decomposition. Analysis of the combustion residue indicated that the addition of OFHD can reduce the agglomeration of aluminum (Al) powder in aluminized propellants. Dynamic pressure characteristics results showed an augmented pressurization rate under argon and oxygen atmospheres, increased by 18.67% and 37.29%, respectively. Heat release tests indicated that the aluminized propellants with the addition of OFHD had a higher combustion heat, being increased by 6.57%. The binder system is expected to be applied in aluminized propellants to improve the mechanical properties and combustion efficiency of Al powder.

materials science, multidisciplinary,crystallography

What problem does this paper attempt to address?

This paper attempts to address the issue of how to simultaneously enhance the mechanical properties and combustion efficiency of aluminum-containing propellants by modifying HTPB (hydroxyl-terminated polybutadiene) binders. Specifically, the researchers used 2,2,3,3,4,4,5,5-octafluoro-1,6-hexanediol (OFHD) as a chain extender to improve the mechanical properties of HTPB binders and reduce the agglomeration of aluminum powder during combustion, thereby enhancing the combustion performance of the propellant. The paper mainly focuses on the following points: 1. **Enhancement of Mechanical Properties**: By adding different amounts of OFHD to the HTPB binder, the researchers aim to improve the mechanical strength and elongation of the binder, ensuring it maintains good performance under extreme conditions. 2. **Optimization of Combustion Performance**: By reducing the agglomeration of aluminum powder during combustion, the researchers aim to improve the combustion efficiency of the propellant, thereby increasing the combustion heat and combustion rate. 3. **Analysis of Thermal Decomposition Behavior**: The study investigates the effect of OFHD on the thermal decomposition behavior of HTPB binders to understand their stability at high temperatures. Overall, this paper aims to develop a new type of propellant binder system that can enhance both mechanical properties and combustion efficiency through chemical modification methods.

Effect of Fluoroalcohol Chain Extension Modified HTPB Binder on the Combustion Performance of Aluminized Propellants

Enhancing energy release of aluminized propellants and explosives through fluorinated binder

Chemical Modification Of Hydroxyl-Terminated Polybutadiene And Its Application In Composite Propellants

Effect of Compounded Aluminum Hydroxide Flame Retardants on the Flammability and Smoke Suppression Performance of Asphalt Binders

The effect of Al/oxidizers interfacial structure on the mechanical properties of composite propellants

Polyphenols-inspired interface modification and reduced agglomeration of solid propellants via a functionalized fluorine-containing organic substance coating layer

Effect of polyol bonding agent on the mechanical properties of hydroxyl‐terminated block copolyether based composite propellant with low aluminum content

Combustion performance modulation and agglomeration inhibition of HTPB propellants by fine Al/oxidizers integration

Tuning the agglomeration and combustion characteristics of aluminized propellants via a new functionalized fluoropolymer

Thermal decomposition of nano Al-based energetic composites with fluorinated energetic polyurethane binders: experimental and theoretical understandings for enhanced combustion and energetic performance

Insights into the Fragmentation of Aluminum Hydride and Its Effect on Combustion and Agglomeration of HTPB Propellant

Hyperbranched polyborate modified HTPB adhesives with enhanced performance and lower glass transition temperature

Preparation of core-shell structured Al-5Li@HTPB powders with improved stability and combustion performance by using perfluoroalkylsilane as a surfactant

Aluminum Hypophosphite in Combination with Expandable Graphite As A Novel Flame Retardant System for Rigid Polyurethane Foams

Enhanced combustion performance of core-shell aluminum with poly(vinylidene fluoride) interfacial layer: Constructing the combination bridge of aluminum powder and poly(vinylidene fluoride)

Synergistic Effect Of Expandable Graphite And Aluminum Hypophosphite On Flame-Retardant Properties Of Rigid Polyurethane Foam

Condensed Combustion Products Characteristics of HTPB/AP/Al Propellants under Solid Rocket Motor Conditions

Effect of complex metal hydride on the thermal decomposition behavior of AP/HTPB-based aluminized solid rocket propellant

Preparation of Go@Fe2o3 Composites and Their Effect on the Combustion Performance of Htpb Propellant

Synthesis and characterization of a novel fluorine-containing triblock copolymer as a potential binder

Synthesis and characterization of flame‐retardant polyurethane based on new chain extenders