Abstract:The force equilibrium and moment equilibrium play a significant role on the sealing performance of gas split floating ring seals. A small deflection angle may generate seriously wear on sealing surface and cause seal failure. Therefore, the thermo-hydrodynamic lubrication analysis of gas split floating ring seal with Rayleigh grooves is investigated considering the deflection angle and frictional heat of surface contact, which is beneficial to grasp the hydrodynamic characteristics and rules under high-temperature and high-speed conditions. Pressure and temperature distributions of sealing rings are numerically calculated for the cases with different deflection angle, rational speed, seal pressure and ambient temperature. Then, the hydrodynamic effect and sealing performance are analyzed. The obtained results show that, the surface Rayleigh step grooves do not present obvious hydrodynamic effect when split seal ring has no deflection. While, a significant hydrodynamic effect can be obtained when the split seal ring presents a deflection angle about dozens of micro radians. Here, a 10% increase of opening force is achieved when the deflection angle reaches 80 μrad in the case of speed 30,000 r/min and seal pressure 0.2 MPa. Moreover, the hydrodynamic effect becomes obvious with increasing deflection angle as well as rotational speed. Meanwhile, the growth of rotational speed results in an obvious increase of film temperature. The increase of ambient temperature has a significant influence on the decrease of leakage rate. When the ambient temperature increases from 340 K to 540 K, the leakage rate reduces exceeding 50%, however, it does not present obvious effect on the opening force. The proposed model has the potential to provide the theoretical basis and design guidance for surface grooves of gas split floating ring seal in the future.

Macro and Micro Characteristics of Glyd-ring Seals in a Wide Temperature Range

Characteristic analysis of aircraft glyd-ring seal based on mixed lubrication model

Analytical and Experimental Method of Thermal Load Estimation for Seals in Transmission of Vehicle

Experimental Study on Dynamic Sealing Performance under High Pressure and High Speed

Theoretical and experimental approach for the characteristics of water-lubricated, high-speed double spiral-groove face seals

Multi-Physical Field, Coupled, Mixed Lubrication Analysis of Hydraulic Reciprocating Vacuum Lip Seal

Study on working mechanism and performance of deep groove seal at high temperature and high speed in mixed lubrication

Transient sealing characteristics of Glyd-ring in the high water-based piston pair under reciprocating pump conditions

Investigation of the Tribological Performance of Reciprocating Seals in A Wide Temperature Range

An improved mixed lubrication model for revealing the mechanism of high speed and frictional heat on sealing performance

Static and Dynamic Characteristics of Hydrodynamic Mechanical Seal

Numerical Analysis of the Traction Effect on Reciprocating Seals in the Hydraulic Actuator

A Theoretical and Experimental Study on Characteristics of Water-Lubricated Double Spiral–Grooved Seals

Thermoelastohydrodynamic Behavior of Gas Spiral Groove Face Seals Operating at High Pressure and Speed

Thermo-hydrodynamic analysis of spiral groove dry gas seals

Thermo-Hydrodynamic Effect of Gas Split Floating Ring Seal with Rayleigh Step Grooves

Theoretical and Experimental Characterization for Macro-Micro Friction Behaviors of EPDM Rubber

Thermal Cavitation Effect on the Hydrodynamic Performance of Spiral Groove Liquid Face Seals

Thermo-elastohydrodynamic mixed-lubrication model for reciprocating rod seals

Thermo-elasto-hydrodynamic Analysis of Triangular Textured Mechanical Face Seals

Micro-Groove Optimisation of High-Speed Inner Ring Micro-Grooved Pumping Seal for New Energy Electric Vehicles