Abstract:To mitigate the shuttle effect of Li–S batteries, a hollow microflower Mo2C/MoO2 heterostructure is synthesized using a two‐step calcining method. The H‐Mo2C/MoO2/nitrogen‐doped carbon/S cathode with the high‐sulfur loading of 6.2 mg cm−2 and a low‐electrolyte/sulfur ratio of at 1C, where the cell exhibits an excellent cycling stability, maintains a capacity of 308 mAh g−1 after 500 cycles. Lithium–sulfur batteries (Li–S batteries) have a high theoretical capacity density. However, due to the solubility of long‐chain polysulfides migration between the positive and negative electrodes driven by concentration gradients, the cycle stability of lithium–sulfur batteries is compromised, hindering their practical application. To mitigate the shuttle effect and enhance the electrochemical performance of Li–S batteries, a hollow microflower (MF) Mo2C/MoO2 heterostructure is synthesized using a two‐step calcining method. The presence of a hetero‐interface improves the electrical conduction rate, facilitating more effective charge transfer at the interface between heterogeneous components. Additionally, the increased catalytic active sites enhance the conversion of polysulfides and promote the catalytic capability. As a result, Li–S batteries with H‐Mo2C/MoO2/nitrogen‐doped carbon MFs as additives in the cathode exhibit excellent rate performance and good cycling stability. After 100 cycles at 0.2C, the capacity remains at 1071.6 mAh g−1, with a capacity retention rate of 90.6%. Notably, the Li–S batteries demonstrate a capacity decay of only 0.011% per cycle over 1000 cycles at 1C, with a specific capacity of 790 mAh g−1 retained after the cycling process. In this work, a rational approach is provided to fabricating transition‐metal carbon‐oxide heterostructures with an optimized structure to enhance the performance of Li–S batteries.

Polysulfide Adsorption by Iron Oxide and Chromium Oxide: Effects on Cycle Life and Redox Kinetics of Lithium‐Sulfur Cells

A Novel Strategy for High-Stability Lithium Sulfur Batteries by in Situ Formation of Polysulfide Adsorptive-Blocking Layer

Effects of Lithium Polysulfides on the Formation of Solid Electrolyte Interfaces in Silicon Anodes

Attenuating the Polysulfide Shuttle Mechanism by Separator Coating

Chemisorption of Polysulfides Through Redox Reactions with Organic Molecules for Lithium–sulfur Batteries

Minimizing Polysulfide Shuttle Effect in Lithium-Ion Sulfur Batteries by Anode Surface Passivation

Polymorph Interface Strategy Presents Avenues for Kinetics-Enhanced and Dendrite-Free Lithium Sulfur Batteries

Effect of silicon dioxide in sulfur/carbon black composite as a cathode material for lithium sulfur batteries

Efficient Catalysis of Ultrathin Two-Dimensional Fe2 O3 -CoP Heterostructure Nanosheets for Polysulfide Redox Reactions

Efficient Catalysis of Ultrathin Two-Dimensional Fe2O3-CoP Heterostructure Nanosheets for Polysulfide Redox Reactions

Promoting Reversible Redox Kinetics by Separator Architectures Based on CoS 2 /HPGC Interlayer as Efficient Polysulfide‐Trapping Shield for Li–S Batteries

Porous Fe2O3 Doped Cathodes for Lithium-Sulfur Batteries

Electrocatalytic polysulfide transformation for suppressing the shuttle effect of Li-S batteries

Effect of Polysulfide Species on Lithium Anode Cycle Life and Reversibility in Li–S Batteries

Tailoring Surface Acidity of Metal Oxide for Better Polysulfide Entrapment in Li‐S Batteries

Rechargeable Iron–Sulfur Battery without Polysulfide Shuttling

Enhanced Polysulfide Regulation <i>via</i> Porous Catalytic V<sub>2</sub>O<sub>3</sub>/V<sub>8</sub>C<sub>7</sub> Heterostructures Derived from Metal-Organic Frameworks toward High-Performance Li-S Batteries

Sulfur-functionalized mesoporous carbons as sulfur hosts in Li-S batteries: increasing the affinity of polysulfide intermediates to enhance performance

Synergistic Polysulfides Adsorption–Conversion with Mo2C–MoO2 Heterostructure for Kinetically Enhanced Lithium–Sulfur Battery

Surface Functionalization of Mesoporous Silica Enabling Long-Life Lithium-Sulfur Batteries

Catalytic Effects in the Cathode of Li-S Batteries: Accelerating polysulfides redox conversion