Abstract:Energy efficiency enhancement methods have received considerable attention within the industry and scientific community, owing to the rising concern of global energy sustainability. The present article attempts to scrutinize the effects of electrohydrodynamics and nanofluids on the rate of heat transfer and fluid flow in the 3-D chain microchannels. Improved heat exchangers (e.g., chain microchannel) would have a key role in increasing of the performance of such systems since they provide efficient thermal management needed for more robust computational power. To date, analysis of electrohydrodynamics and nanofluids in the chain microchannel was not comprehensively discussed. Here, steady-state, laminar, and three-dimensional chain microchannel are numerically modeled based on a control volume method in Fluent. Results show that by increasing the volume fraction of nanoparticles, the viscosity of the nanofluid increases leading to an increase in pressure drops. Moreover, Nusselt at Re = 125, 250, 500 and 1000 for hybrid nanofluid ( ∅AL2O3=∅CuO=4% ) is 1.206, 1.541, 2.075 and 2.707, respectively which, in turn, depicts surging by 22.94%, 24.17%, 24.70% and 24.707% in comparison to water, respectively. In addition, at low Reynolds number (0.416 ≤Re≤4.166), the lower Reynolds results in decreasing of percentage of pressure drop. Meanwhile, imposing electrohydrodynamic (V = 30 KV) at Re= 125, 250, 500 and 1000 leads to increasing by 23%, 22%, 20% and 18% of Nusselt number in comparison to absence of electric field, respectively. It means that the considered effect of the increasing the Nusselt number at lower Reynolds number is more effective. Moreover, heat transfer rises with augmentation of supplied voltage and Reynolds number. Using active (electrohydrodynamics and hybrid nanofluid) and passive (3-D chain microchannel) methods to enhance heat transfer rate. Adding two additional equations (including ρc and V) in Fluent With Using UDS (User Defined Scalar). Writing UDM to achieve E ( E→=−∇V ) as well as UDF to solve source terms ( ρc. E and J→.E→ ) Considering the charge convection term ( ρcu→ ) in the electric current density ( j→=ρ(ρcβE→+ρcu→+De∇ρc)) owing to used fluids (water and nanofluids) in this article, whilst it is negligible for air. Investigation of effects of different types of nanofluid and their concentration as well as impacts of adding electrode and its voltages. Imposing electrohydrodynamic (V = 30 KV) at Re= 125, 250, 500 and 1000 leads to increasing by 23%, 22%, 20% and 18% of Nusselt number in comparison to absence of electric field, respectively.

Large eddy simulation of mixed convection of hybrid nanofluid containing nano-encapsulated phase change material in a vertical channel

Turbulent Heat Transfer of Hybrid Nanofluid with Nano-Encapsulated Phase Change Material in a Square Channel

Investigation of forced convection of a novel hybrid nanofluid containing NEPCM in a square microchannel: Application of single-phase and Eulerian-Eulerian two-phase models

Mixed convection of nano-encapsulated phase change suspensions in a wavy wall lid-driven trapezoid cavity

Finite difference simulation of natural convection of two-phase hybrid nanofluid along a vertical heated wavy surface

Impact of two-phase hybrid nanofluid approach on mixed convection inside wavy lid-driven cavity having localized solid block

Heat transfer enhancement in magnetohydrodynamic hybrid nanofluids over a Bi-directional extending sheet with slip and convective conditions

Investigation of the thermo-convective characteristics of a flow passing through a partially heated channel filled with a porous medium saturated with a hybrid nanofluid

Numerical investigation of multiphase flow effects on mixed convection in partially heated hybrid nanofluid-filled cavity

Nanoparticles hybridization in bidirectional flowing of Prandtl–Eyring material with temperature-dependent conductivity: A numerical approach

Convective heat transfer of nano-encapsulated phase change material suspension in a divergent minichannel heatsink

Three-dimensional numerical investigation of hybrid nanofluids in chain microchannel under electrohydrodynamic actuator

A numerical simulation validated experimentally for thermally developing convection characteristics of a phase change nanofluid flow in a circular tube

Mixed convection phenomenon for hybrid nanofluid flow exterior to a vertical spinning cylinder with binary chemical reaction and activation energy

Thermal analysis of hybrid nanofluids inside a microchannel heat exchanger for electronic cooling

Impacts of two-phase nanofluid approach toward forced convection heat transfer within a 3D wavy horizontal channel

Effect of Nanoparticles and Base Fluid Types on Natural Convection in a Three-Dimensional Cubic Enclosure

The effects of magnetic field and thermal radiation on the mixed convection of Al2O3-Cu/water hybrid nanofluid over a permeable vertical flat plate

Flow and Heat Transfer in Micro Pin Fin Heat Sinks with Nano-Encapsulated Phase Change Materials

Analysis of the heat transfer enhancement in water-based micropolar hybrid nanofluid flow over a vertical flat surface

Numerical Analysis of Unsteady Hybrid Nanofluid Flow Comprising CNTs-Ferrousoxide/Water with Variable Magnetic Field