Shapla Akter,Amzad Hossain,Md. Mahadul Islam,Md. Mamun Molla
Abstract:This study employs finite difference modelling to investigate the natural convection of a two-phase hybrid nanofluid consisting of Al 2 O 3 and Cu nanoparticles dispersed in water along a vertically heated wavy surface. The hybrid nanofluid has unique features that influence convective heat transfer. Numerical solutions analyze fluid flow patterns and temperature distributions, providing insights into heat exchange and thermal management. The research highlights the importance of hybrid nanofluids, notably those containing Al 2 O 3 and Cu in a water base, in improving overall heat transfer efficiency. The mathematical model accounts for laminar and incompressible fluid flow with a Prandtl number of Pr = 6.2, Lewis number Le = 10, and maximum 10% concentration of hybrid nanoparticles. After transforming the governing equations into a non-dimensional form, the implicit finite difference method is used to solve them. The solution employs the in-house FORTRAN 90 code and compares its outcomes with the benchmark results. Various parameters, such as the Schmidt number ( Sc = 1 to 10), volume fraction of nanoparticles ( φ=0.0 to 0.1), wavy amplitude ( A = 0.0 to 0.3), and NBT = (0.05 to 0.2), are investigated regarding temperature, velocity, local skin friction coefficient (Cf) , local Nusselt number ( Nu ), streamlines, and isotherms. Elevated volume fraction generally decreases skin friction, increases temperature, and may reduce velocity. Meanwhile, higher skin friction, temperature, velocity, and local Nusselt numbers often correlate with elevated Schmidt numbers. Changes in amplitude and NBT affect skin friction, temperature, velocity, and local Nusselt numbers, providing information on the dynamics of fluid systems. For example, when the volume fraction ( φ ) increases from 0 to 0.1 at Y = 2, the temperature rises by 75% , while the velocity gradually decreases by 11.11% . This is in contrast to findings according to when the NBT rises from 0.05 to 0.2 at Y = 1. In this case, the temperature drops by 18.75% , followed by a 9.68% fall in fluid velocity. Understanding these interactions enhances comprehension of heat transfer and fluid dynamics. By investigating these interactions, we not only improve our understanding of heat transfer and fluid dynamics, but also open the door to new strategies for improving thermal systems and manufacturing procedures.
What problem does this paper attempt to address?
The problem that this paper attempts to solve is to study the natural convection phenomenon of two - phase hybrid nanofluids on a vertically heated wavy surface using the finite - difference simulation method. Specifically, the research focuses on the following points:
1. **Fluid Flow Patterns and Temperature Distributions**: Analyze the fluid flow patterns and temperature distributions of the hybrid nanofluid near the vertically heated wavy surface through numerical solutions to understand the mechanisms of heat exchange and heat management.
2. **Improvement of Heat Transfer Efficiency**: Explore the potential of hybrid nanofluids (especially water - based hybrid nanofluids containing Al₂O₃ and Cu nanoparticles) in improving the overall heat transfer efficiency.
3. **Parameter Influences**: Study the influences of different parameters (such as Schmidt number, nanoparticle volume fraction, wave amplitude, and NBT ratio) on the skin - friction coefficient, local Nusselt number, flow velocity, and temperature, thereby providing information on the dynamic changes of the fluid system.
4. **Understanding of Fluid Dynamics and Heat Transfer**: Through these studies, not only the understanding of fluid dynamics and heat transfer is deepened, but also new strategies for improving thermal systems and manufacturing processes are provided.
### Main Research Contents
- **Mathematical Model**: A mathematical model for laminar and incompressible fluid flow was established, considering a Prandtl number of 6.2, a Lewis number of 10, and a maximum hybrid nanoparticle concentration of 10%.
- **Solution Method**: After converting the governing equations into dimensionless forms, an implicit finite - difference method was used for solution, and self - written FORTRAN 90 code was used for calculation.
- **Parameter Analysis**: The influences of Schmidt number (Sc = 1 to 10), nanoparticle volume fraction (φ = 0.0 to 0.1), wave amplitude (A = 0.0 to 0.3), and NBT ratio (NBT = 0.05 to 0.2) on temperature, velocity, local skin - friction coefficient (Cf), local Nusselt number (Nu), streamlines, and isotherms were studied.
### Key Findings
- **Influence of Nanoparticle Volume Fraction**: Increasing the nanoparticle volume fraction usually reduces the skin - friction coefficient and increases the temperature, but may reduce the velocity. For example, when the volume fraction increases from 0 to 0.1, the temperature rises by 75%, while the velocity gradually decreases by 11.11%.
- **Influence of Schmidt Number**: A higher Schmidt number is usually associated with a higher skin - friction coefficient, temperature, velocity, and local Nusselt number.
- **Influences of Wave Amplitude and NBT Ratio**: Changes in wave amplitude and NBT ratio will affect the skin - friction coefficient, temperature, velocity, and local Nusselt number, thereby providing information on the dynamic changes of the fluid system.
### Conclusions
Through these studies, the author not only deepens the understanding of the natural convection phenomenon on complex surfaces, but also provides valuable references for improving heat transfer efficiency and optimizing thermal system design. These research results are of great significance for engineering applications, especially in the fields of heat management and heat transfer.