Abstract:Polytetrafluoroethylene (PTFE) has become an essential material in the manufacturing of critical flow-control components in various industries. These components require high surface quality and micron-level machining dimensions. The study of the minimum uncut chip thickness (MUCT) presents an opportunity to enhance the machining precision of PTFE. The objective of the research is to determine the MUCT of PTFE by employing finite element (FE) cutting simulation and orthogonal cutting experiments. Initially, the two-dimensional orthogonal FE cutting models, with varying parameters of cutting depth (30–80 μm) and cutting speed (5000 mm/min), utilizing the Johnson–Cook (J–C) constitutive model has been applied for simulating the MUCT of PTFE. The parameters of the J–C constitutive model have been determined through quasi-static tension tests (Strain rates: 0.001 s −1 –0.1 s −1 , Temperature: 24 °C) and the split Hopkinson bar (SHPB) tests (Strain rates: 500 s −1 –3000 s −1 , Temperature: 24–100 °C). Subsequently, the orthogonal cutting experiments corresponding to the FE simulation are designed and performed. The cutting force, cutting chip, and machined surface morphology are analyzed to assess the precision of the established FE model and determine the MUCT of PTFE. It was concluded that the numerical results are in good agreement with the experimental results, with a minimum relative error of 0.885% in cutting force and 2.03% in the axial ratio of chip curvature. And the MUCT for PTFE was determined to be 70 μm in this study, in the case of rake angle, flank angle, and tool edge radius of the cutting tool are 0°, 6°, and 40 μm, respectively. It has been indicated that the properties and flow direction of the removed workpiece material play a significant role in chip formation under the influence of extrusion and friction in the workpiece-tool-chip contact area. These results offer a theoretical foundation for enhancing the machining precision of PTFE.

Material removal characteristics of metal-polymer composites in the cutting process

Tribological behavior of modified polyetheretherketone composites in sliding against stainless steel under water lubrication

Analytical modeling of cutting forces and investigation of the material removal mechanism in milling of HSF/PR composite

The effects of copper and polytetrafluoroethylene (PTFE) on thermal conductivity and tribological behavior of polyoxymethylene (POM) composites

Investigation of the effect of the cut parameter on the machining performance of PTFE cutting

Molecular Dynamics Simulation and Finite Element Method Investigation of PTFE/carbon Fiber Composite Tribological Properties

Synergistic Enhancement of the High-Temperature Friction and Wear Behavior of PTFE Matrix Composites with the Addition of CF, PEEK, and TiC

Investigation on grinding temperature characteristics of CF/PEEK and material removal mechanism under temperature treatments

Investigation of machinability in turning of PTFE based on MRR and cutting energy

On the Machining Behavior of Carbon Fiber Reinforced Polyimide and PEEK Thermoplastic Composites

IMPROVEMENT OF SURFACE PROPERTIES OF CARBON FIBER REINFORCED EPOXY COMPOSITES USING SOLID LUBRICANTS DURING MACHINING PROCESSES

Investigating the material removal mechanism and cutting performance in ultrasonic vibration-assisted milling of carbon fibre reinforced thermoplastic

Numerical Cutting Simulation and Experimental Investigations on Determining the Minimum Uncut Chip Thickness of PTFE

Material removal mechanism of copper chemical mechanical polishing with different particle sizes based on quasi-continuum method

Machinability of the Thermoplastic Polymers: PEEK, PI, and PMMA

Research on Tool Wear and Surface Integrity of CFRPs with Mild Milling Parameters

Optimization of tungsten carbide processing parameters for laser heating and ultrasonic vibration composite assisted cutting

Quantitative Measurement of Morphological Characteristics of PTFE Composite Transfer Films Based on Computer Graphics

A Study of the Tribological Behavior of Transfer Films of PTFE Composites Formed under Different Loads, Speeds and Morphologies of the Counterface

Effect of Perfluoropolymers on the Anti-Wear Properties of Carbon Fiber/Polyphenylene Sulfide Composites: A Comparative Study

Influence of cutting parameters on PCD tool wear during milling tungsten carbide