Abstract:Abstract Passive cooling through phase change materials (PCM) creates beneficial complimentary cooling techniques aimed at providing thermal gradient mitigation during device operation without additional power requirements. These have been well studied but are difficult to implement due to complications concerning effective enclosure of the liquid phase. Encapsulated PCM particles can be embedded in other materials to form composites with form stable solid–liquid phase transitions. This study characterizes a new composite of silicone gel and encapsulated phase change materials (ePCMs) for use as an encapsulant. The ePCMs contain a paraffin core and titania shell resulting in a self-contained solid–liquid phase transition producing an average of 132.9 J/g of latent heat capacity. The gel composites gain latent heat capacity as a linear function of ePCM concentration by weight. The 30% ePCM sample contains 41.0 J/g of latent heat capacity, approximately 30% of ePCM control samples. The specific heat capacity of the silicone gel without ePCMs is 1.539 J/g-° C and 2.825 J/g-° C for the ePCM particles. As the ePCM concentration increases, the specific heat capacity is increased toward the highest value of the pure ePCMs across all temperature ranges. The coefficient of thermal expansion of the composites is increased with ePCM concentration up to a maximum of 96% in the 20% ePCM concentration. The elastic modulus remains relatively constant across ePCM concentrations and temperatures. In the needle–needle breakdown voltage testing the 20% sample has a 6 kV/mm reduction in dielectric strength and higher than 20% ePCM samples show increased variability in strength due to the dispersed particles. Overall, the results from these material characterizations demonstrate the promise of dielectric composites containing ePCM particles to add passive cooling capability into electronics devices without complex structures.

Synthesis of nano-size paraffin/silica-based encapsulated phase change materials of high encapsulation ratio via sol–gel method

Encapsulation of Phase Change Materials Via Interfacial Miniemulsion Polymerization for High Thermal Energy Storage Density

Nano-encapsulated PCM Via Pickering Emulsification.

Synthesis and Thermal Performance of Polyurea Microcapsulated Phase Change Materials by Interfacial Polymerization

Nanosilicon dioxide hydrosol as surfactant for preparation of microencapsulated phase change materials for thermal energy storage in buildings

Microencapsulation of Phase Change Materials with a Soy Oil-Based Polyurethane Shell via Pickering Emulsion Polymerization

Systematic investigation on preparation and characterization of silica shell microencapsulated phase change materials based on sodium silicate precursor

Studies on Nanosilica Modified Paraffin Microcapsule Phase Change Energy Storage Materials

Preparation and assessment of paraffin/SiO2composite phase change material based on the efficacy coefficient method

Impact of Encapsulated Phase Change Material Additives for Improved Thermal Performance of Silicone Gel Insulation

Synthesis and Characterization of Mixed Alkanes Microcapsules with Phase Change Temperature below Ice Point for Cryogenic Thermal Energy Storage

Investigation of Phase Change Material Encapsulation by Complex Coacervation

Fabrication and Performance of Composite Microencapsulated Phase Change Materials with Palmitic Acid Ethyl Ester as Core

Preparation and Characterization of Novel MicroPCMs (microencapsulated Phase-Change Materials) with Hybrid Shells Via the Polymerization of Two Alkoxy Silanes

Preparation and characterization of eicosane-paraffin/expanded graphite/polyurethane as form-stable composite phase change materials with wide phase change temperature range

Preparation of Silica Microcapsules Containing Phase Change Paraffin Wax

Microencapsulated phase change material through cellulose nanofibrils stabilized Pickering emulsion templating

Facile and low energy consumption synthesis of microencapsulated phase change materials with hybrid shell for thermal energy storage

Preparation and Thermal Properties of Microencapsulated Paraffin with Polyurea/acrylic Resin Hybrid Shells As Phase Change Energy Storage Materials

Enhancing Heat Capacity of Colloidal Suspension Using Nanoscale Encapsulated Phase-Change Materials for Heat Transfer.

Facile Method of Fabricating Microencapsulated Phase Change Materials with Compact Bonding Polymer–silica Hybrid Shell Using TEOS/MPS