Abstract:Silicone elastomers have been shown to be well-suited for dielectric elastomer actuators (DEA), mainly due to their unique combination of properties such as, high elasticity and reliability, fast electromechanical response, and high thermal stability. 3D printing of silicones can be achieved by employing either costly and sensitive metal catalysts, low-viscosity precursors with complex chemical structures that are sometimes difficult to reproduce, or rheological modifiers or by incorporating reinforcing fillers (e.g., silica). Here, we present a formulation for 3D printing consisting only of α,ω-bis(trimethylsiloxy)poly(dimethylsiloxane-co-methylthiopropylsiloxane) with a molecular weight M n = 55000 g/mol (much higher than what the literature reports) and 9.1 mol % vinyl groups as the base polymer and α,ω-bis(trimethylsiloxy)poly(dimethylsiloxane-co-methylthiopropylsiloxane) with M n = 7000 g/mol and 5 mol % thiol groups as a cross-linking agent, along with 2,2-dimethoxy-2-phenylacetophenone (DMPA) as the photocatalyst, showing the optimal thiol/vinyl molar ratio of 0.047. The impact of UV exposure time on the proposed cross-linking system was investigated via FTIR spectroscopy and compression tests, revealing fast curing rates and gelation times of less than 1 s. As a demonstration, the printing platform produced a rubber grid consisting of 24 printing layers that can endure 100 compressive cycles at 50% strain without hysteresis. Moreover, the 3D-printed silicone ink generates elastomers with an elongation at break of 221%, a Young’s modulus of 0.29 MPa, and a stress decay <2% when subjected to 200% strain for 100 min, while the electromechanical tests reveal a maximum actuation strain of 9.5% at an electric field of 41 kV/mm. Our approach may open pathways for processing soft materials with unique geometries for medical devices, soft actuators, haptics, and beyond.

Three-Dimensionally Printed Expandable Structural Electronics via Multi-Material Printing Room-Temperature-Vulcanizing (RTV) Silicone/Silver Flake Composite and RTV

High-Resolution Rapid Prototyping of Liquid Metal Electronics by Direct Writing on Highly Prestretched Substrates

High Resolution Direct Writing Liquid Metal Patterns for Printed Stretchable Electronics

Direct Fabrication of Stretchable Electronics on a Polymer Substrate with Process‐Integrated Programmable Rigidity

Three-Dimensional Coprinting Of Liquid Metals For Directly Fabricating Stretchable Electronics

Unlocking the flexibility of multi-material 3D extrusion printing for soft iontronics

Multi-Material 3D Printing of Highly Stretchable Silicone Elastomer.

Stretchable silicon electronics and their integration with rubber, plastic, paper, vinyl, leather and fabric substrates

Soft Elastomers with Programmable Stiffness As Strain-Isolating Substrates for Stretchable Electronics.

Printable Multi-Stage Variable Stiffness Material Enabled by Low Melting Point Particles Additives

Volumetric 3D Printing of Ionic Conductive Elastomers for Multifunctional Flexible Electronics

Three-Dimensional Stretchable Microelectronics by Projection Microstereolithography (PμSL)

3D Printing High‐Resolution Conductive Elastomeric Structures with a Solid Particle‐Free Emulsion Ink

Highly stretchable electric circuits from a composite material of silver nanoparticles and elastomeric fibres

Omnidirectional Printing of Soft Elastomer for Liquid-State Stretchable Electronics.

Stretchable Ultraviolet Curable Ionic Conductive Elastomers for Digital Light Processing Based 3D Printing

3D Printed, Solid‐State Conductive Ionoelastomer As a Generic Building Block for Tactile Applications

Hybrid Printed Rigidity‐Programmable Substrate/Liquid Metal 3D Circuits Toward Stretchable Electronics

All-Silicone 3D Printing Technology: Toward Highly Elastic Dielectric Elastomers and Complex Structures

High-resolution, reconfigurable printing of liquid metals with three-dimensional structures

Modulus-tunable multifunctional hydrogel ink with nanofillers for 3D-Printed soft electronics