Abstract:Amorphous carbon (a-C) film is a promising solid lubricant coating due to its unique structure and excellent properties. However, its poor adhesion and long running-in period hinder the application in metal components. Graphene sheet-embedded carbon (GSEC) film has a significantly shorter running-in period but suffers from inferior tribological properties due to its rough surface and weak mechanical characteristics . In this study, we utilized an electron cyclotron resonance (ECR) plasma nano-surface manufacturing device to deposit GSEC films onto steel substrate surfaces. By manipulating the surface/interface texture and incorporating chromium (Cr) doping, the tribological properties of the GSEC films were improved both chemically and physically. The results demonstrated that the textured carbon film exhibited superior adhesion to the steel substrate and a wear life that was three orders of magnitude longer than the untextured GSEC film, under low normal load conditions while sliding against the GCr15-bearing steel ball. After doping the Cr into textured carbon films, there was a significant reduction in the friction coefficients, and the wear type of carbon film transformed from adhesive wear to abrasive wear. Moreover, the doped carbon films demonstrated prolonged wear lives under high normal loads. This improvement can be attributed to the formation of hard CrC nanocrystalline, which effectively reduced surface roughness and enhanced the mechanical properties of the carbon films. Notably, even under a contact pressure of 0.83 GPa, the doped carbon film maintained favorable tribological performances. These findings have extended the potential applications of carbon films on metal substrates.

Effect of Erucamide as Polyurea Grease Additive on Tribological Properties of GCr15 Steel

Effects of Erucamide and N-phenyl-α-naphthylamine on the Friction and Torque Behaviors of Grease on Roller Bearings

The effect of additives on tribological behaviours in polyurea grease

Investigating the rheological and tribological properties of polyurea grease via regulating ureido amount

Tribological Behavior of WS2 Nanoparticles as Additives in Calcium Sulfonate Complex–Polyurea Grease

Tribological behavior and mechanism of surface-modified mullite as polyurea grease additive

Facile formulation of graphene oxide modified commercial polyurea grease and its enhanced tribological capability under extremely high contact stress

Rheological and Tribological Properties of polyurea greases containing additives of MoDDP and PB

Effects of PTFE Particles on Tribological Properties of Urea Grease

The Effect of Plasma Nitriding on the Tribology of Perfluoropolyether Grease-Lubricated 2cr13 Steel Couples in Vacuum

Effects of hBN and CaCO3 Nanoparticles on Tribological and Vibration Properties of Polyurea Grease on Rolling Bearing

Tribological Studies of Epoxy Composites With UHMWPE and MoS2 Fillers Coated on Bearing Steel: Dry Interface and Grease Lubrication

Study on fretting friction properties based on GCr15 alloy and liquid epoxy resin protective coatings on GCr15 alloy

The Synergistic Effects of EP and AW Additives with Oxynitrided Surface of Steel

Alkyl Imidazolium Ionic Liquids as Friction Reduction and Anti-Wear Additive in Polyurea Grease for Steel/Steel Contacts

Effects of Surface Texturing and Laminar Plasma Jet Surface Hardening on the Tribological Behaviors of GCr15 Bearing Steel

The Synergistic Effects of EP and AW Additives with a Sulphurised Steel Surface under Boundary Lubrication

The Synergistic Effects of Tricresyl Phosphate Oil Additive with Chemico‐thermal Treatment of Steel Surfaces

Comparative study on corrosion resistance and lubrication function of lithium complex grease and polyurea grease

Enhancing tribological performance of graphene sheet-embedded carbon films on steel substrates via texture engineering and chromium doping

Tribological Investigation of CaF2 Nanocrystals As Grease Additives