Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. Efficient optimization of polymeric materials in fused filament fabrication 3D printing (FFF 3DP) is crucial for productivity, cost reduction, resource conservation, consistency, and enhanced part performance. This study employed a multiresponse central composite design of experiments (CCD-DOE) with the desirability function algorithm (DFA) to optimize printing settings on polylactic acid (PLA) using a commercial FFF 3D printer. The goal was to identify optimal parameters for faster build time and reduced material usage in PLA part fabrication. The fabrication process involved computer-aided design and modeling of standard PLA dogbone specimens, meeting ASTM-D638 Type 1 tensile test standards. These specimens were then 3D printed using Ultimaker Green RAL 6018 PLA filament and a 2+ model printer set at varying print parameters. Reduced second-order polynomial models for printing time and PLA weight were generated using stepwise regression, eliminating noninfluential parameters. The models revealed that higher layer thickness, increased print speed, and lower infill density resulted in faster printing times, while lower infill density and higher layer thickness led to lighter PLA prints. DFA analysis determined the optimal settings as a layer thickness of 0.26–0.30 mm and an infill density of 35% for minimizing printing time and PLA weight. The stress–strain curves displayed characteristic high-strength, brittle behavior under tension, while tensile testing of optimized PLA parts revealed increased strength with low strain at the break when layers were aligned parallel to the applied force. These findings advance additive manufacturing and provide practical guidelines for high-quality 3D-printed PLA components. Optimizing FFF 3DP parameters enables efficient production with reduced time and material usage, enhancing cost-effectiveness and the fabrication of high-performance 3D printed products.

Prediction of Mechanical Properties and Failure Behavior of Nano-Alumina Reinforced Poly(Lactic) Acid Composite for Fused Deposition Modeling 3D Printing via Finite Element Analysis

Assessment Effect of Nanometer-Sized Al2O3 Fillers in Polylactide on Fracture Probability of Filament and 3D Printed Samples by FDM

Numerical Calculation and Properties Study on Polylactic Acid (Pla)/nano-Hydroxyapatite (N-Ha) Composite Fluid 3D Printed by Fused Deposition Modeling

Modeling the fracture behavior of 3D-printed PLA as a laminate composite: Influence of printing parameters on failure and mechanical properties

Maximizing performance and efficiency in 3D printing of polylactic acid biomaterials: Unveiling of microstructural morphology, and implications of process parameters and modeling of the mechanical strength, surface roughness, print time, and print energy for fused filament fabricated (FFF) bioparts

The fabrication of long carbon fiber reinforced polylactic acid composites via fused deposition modelling: Experimental analysis and machine learning

Optimization of Process Parameters of Fused Filament Fabrication of Polylactic Acid Composites Reinforced by Aluminum Using Taguchi Approach

Mechanical characteristics and failure morphology of FFF-printed poly lactic acid composites reinforced with carbon fibre, graphene and MWCNTs

Investigating physical and mechanical properties of alumina/acrylonitrile butadiene styrene composites manufactured by fused deposition modeling

A Hierarchical Nano to Micro Scale Modelling of 3D Printed Nano-Reinforced Polylactic Acid: Micropolar Modelling and Molecular Dynamics Simulation

Correlation between Infill Percentages, Layer Width, and Mechanical Properties in Fused Deposition Modelling of Poly-Lactic Acid 3D Printing

On strain rate and temperature dependent mechanical properties and constitutive models for additively manufactured polylactic acid (PLA) materials

An artificial neural network-based predictive model for tensile behavior estimation under uncertainty for fused deposition modeling

Tensile and Compression Strength Prediction and Validation in 3D-Printed Short-Fiber-Reinforced Polymers

Mechanical properties of 3D printed polylactic acid elements: Experimental and numerical insights

A method to predict the ultimate tensile strength of 3D printing polylactic acid (PLA) materials with different printing orientations

Comprehensive characterization of mechanical and physical properties of PLA structures printed by FFF-3D-printing process in different directions

Experimental analysis and optimization of mechanical properties of FDM-processed polylactic acid using Taguchi design of experiment

On the optimized fused filament fabrication of polylactic acid using multiresponse central composite design and desirability function algorithm

3D printed polylactide based zirconia toughened alumina composites: fabrication, mechanical and in vitro evaluation

Mechanical characterization of polylactic acid, polycaprolactone and Lay-Fomm 40 parts manufactured by fused deposition modeling, as a function of the printing parameters