Abstract:Design of efficient, downsized piston engines requires an understanding of transient wall heat losses. Measurements of the spatially and temporally evolving thermal boundary layer (TBL) are required to facilitate this knowledge. This work takes advantage of hybrid fs/ps rotational coherent anti-Stokes Raman spectroscopy (HRCARS) to measure single-shot, wall-normal gas temperatures, which provide exclusive access to the TBL. Phosphor thermometry is used to measure wall temperature. Experiments are performed in a fixed-volume chamber that operates with a transient pressure rise/decay to simulate engine-relevant compression/expansion events. This simplified environment is conducive for fundamental BL studies associated with engine-relevant processes. The TBL development and corresponding heat losses are evaluated within two engine-relevant regimes: (1) an unburned-gas regime comprised of gaseous compression and (2) a burned-gas regime, which includes high-temperature compression/expansion processes. The time-history of important BL quantities such as gas / wall temperatures, TBL thickness, wall heat flux, and relative energy lost at the wall are evaluated in these regimes. During the mild compression, Tcore increases by 30K and a TBL is initiated with {\delta}T ~ 200 {\mu}m. Wall heat fluxes remain below 6 kW/m2, but corresponds to ~6% energy loss per ms. In the burned-gas regime, Tcore resembles adiabatic flame temperatures, while Twall increases by 16K. A TBL rapidly develops as {\delta}T increases from 290-730 {\mu}m. Energy losses in excess of 25% occur after flame impingement and slowly decay to ~10% at the end of expansion. Measurements also resolve thermal mixing of fresh- and burned gases during expansion, which yield strong temperature reversals in the TBL. Findings are compared to canonical environments and demonstrate the transient TBL nature during engine-relevant processes.

Transient temperature calculation method for complex fluid-solid heat transfer problems with scattering boundary conditions

A Study on Heat Transfer Model for the Dynamic Contact Boundary Between Piston Ring and Cylinder Liner

Study of Different Cooling Structures on the Thermal Status of an Internal Combustion Engine

Determining water mass flow control strategies for a turbocharged SI engine using a two-stage calculation method

Partitioned Coupled Heat Transfer Fluid-Structure Interaction for Transient and Steady State Analysis of Aero Engines Applications

An In-Cylinder Transient Heat Transfer Model for Temperature Field Simulation of Diesel Engine Structure

Calculation of the Radiation Heat Transfer in Cylinder of Diesel Engine by the Monte-Carlo Method

Experimental investigation of thermal boundary layers and associated heat loss for transient engine-relevant processes using HRCARS and phosphor thermometry

Simulation of In-Cylinder Radiative Heat Transfer of Diesel Engine with Monte-Carlo Method

A multi-time scales semi-decoupled CHT (Coupled Heat Transfer) model and its application on piston transient heat transfer simulation

Study of In-Cylinder Heat Transfer Boundary Conditions for Diesel Engines under Variable Altitudes Based on the CHT Model

Simulation Study on Cyclic Transient Heat Transfer of Piston-cylinder Liner

Numerical Simulation of Reacting Flow in the Combustion Chamber and Study of the Impact of Turbulent Diffusion Coefficients

Estimation of Piston Surface Temperature During Engine Transient Operation for Emissions Reduction

Internal Combustion Engine Heat Transfer and Wall Temperature Modeling: An Overview

An accelerated time-scale decomposition algorithm for transient thermal fluid-solid coupled simulations in multi-medium systems

A space-time averaged steady-state heat transfer model and its application in Wankel rotary engines

Transient Surface Heat Flux and Surface Temperature Engineering Prediction of Hypersonic Vehicle

Numerical and experimental study on piston multi-physical field heat load of marine engine based on high frequency oscillatory cooling and combustion characteristics

Numerical investigation of thermal soak within engine bay using lattice Boltzmann method

Coupled Heat Transfer Predictions of Thermal Environment for a Turbine Rotor