Marangoni instability in a viscoelastic binary film with cross-diffusive effect

Rajkumar Sarma,Pranab Kumar Mondal

DOI: https://doi.org/10.1017/jfm.2020.941

IF: 3.7

2021-01-15

Journal of Fluid Mechanics

Abstract:Abstract

mechanics,physics, fluids & plasmas

What problem does this paper attempt to address?

Thermosolutal Marangoni instability in a viscoelastic liquid film: effect of heating from the free surface

Rajkumar Sarma,Pranab Kumar Mondal

DOI: https://doi.org/10.1017/jfm.2020.880

IF: 3.7

2020-12-22

Journal of Fluid Mechanics

Abstract:Abstract

mechanics,physics, fluids & plasmas
Instabilities of Marangoni and elasticity in a molten polymer film

Kai Tian,Chundong Xue,Jifeng Cui,Kairong Qin,Zhaodong Ding

DOI: https://doi.org/10.1016/j.jnnfm.2024.105324

IF: 3.112

2024-09-23

Journal of Non-Newtonian Fluid Mechanics

Abstract:This study conducts a comprehensive exploration of the elasticity and Marangoni instability exhibited by a non-Newtonian polymer film flow down an inclined plane within the context of an upper-convected Maxwell (UCM) model. The asymptotic solutions are derived utilizing the stream function and perturbation method based on the long-wave assumption. The numerical solutions are effectively solved at arbitrary wavelengths through the implementation of the Chebyshev spectral collocation technique. The results show that the presence of elastic stress renders the film more susceptible to destabilization. The underlying mechanisms that instigate the instability are examined from an energy balance perspective. It is determined that the instability of the film is predominantly governed by shear stress (SHE) and elastic stress (DIP) effects. Shear stress increases the perturbation kinetic energy to promote instability, while elastic stress decreases the perturbation kinetic energy to enhance stability. However, for the Weissenberg number Wi=1 , the shear stress changes from an unstable to a stabilizing factor, and the elastic stress changes from stable to unstable when the wave number k>1 . This intriguing inversion is attributed to the dual nature of elasticity, possessing both stabilizing and destabilizing tendencies. Despite the work of Marangoni stress (MAT) magnitude remaining within the order of 10−3 , the Marangoni effect indirectly contributes to instability enhancement.

mechanics
Marangoni Flows in a Bilayer Liquid Microfilm Interface on Wave-Contoured Hot Substrates

Shubham Agrawal,Prasanta K Das,Purbarun Dhar

DOI: https://doi.org/10.1021/acs.langmuir.3c01927

IF: 3.9

2023-10-03

Langmuir

Abstract:This study explores the thermal Marangoni hydrodynamics in an immiscible, binary-liquid thin-film system, which is open to the gas phase at the top and rests on a heated substrate with wavy topology. The sinusoidal contour of the heated (constant-temperature) substrate results in temperature gradients along the liquid-liquid and liquid-gas interfaces, causing fluctuations in the interfacial tension, ultimately leading to Marangoni hydrodynamics in the liquid-liquid films. This type of flow is notable in liquid film coatings on patterned surfaces, which are widely used in MEMS/NEMS applications (Weinstein, S. J.; Palmer, H. J. Liquid Film Coating: Scientific Principles and Their Technological Implications; 1997, pp 19-62; Palacio, M.; Bhushan, B. Adv. Mater. 2008, 20, 1194-1198) and biological cell sorting operations (Witek, M. A.; Freed, I. M.; Soper, S. A. Anal. Chem. 2019, 92, 105-131). We solve the coupled Navier-Stokes and energy equations by the perturbation technique to obtain approximate analytical solutions and an understanding of the thermal and hydrodynamic transport in the system domain. Our study explores the parametric influence of the relative thermal conductivity of the liquid layers (k), film thickness ratio (r), and the system's Biot number (Bi) on these transport phenomena. While the strength of the thermal Marangoni effect that is generated reduces with an increase in the relative thermal conductivity (k), the impact of r depends on the k value. We observe that for k > 1 the intensity of Marangoni flow increases with r; however, the opposite holds for k < 1. Furthermore, larger values of Bi induce higher resistance to the vertical conduction from the wavy substrate compared to the convection resistance offered at the top surface, destructively interfering with the ability of the patterned substrate to generate interfacial temperature fluctuations and hence weakening the Marangoni flow.
Thermocapillary instability and wave formation on a viscous film flowing down an inclined plane with linear temperature variation: Effect of odd viscosity

Sanghasri Mukhopadhyay,Asim Mukhopadhyay

DOI: https://doi.org/10.1063/5.0040260

IF: 4.6

2021-03-01

Physics of Fluids

Abstract:Thermocapillary instability and formation of waves for a thin viscous falling film with broken time-reversal-symmetry have been discussed in this present study. The film is flowing over a flat, rigid inclined plate with linear temperature variation. The presence of the odd part of the Cauchy stress tensor with odd viscosity coefficient brings new characteristics in thin film flow. The nonlinear evolution model, which tracks the free surface formation for this problem, has been developed using classical long-wave expansion method. Due to the presence of odd viscosity in the liquid, the evolution equation modified significantly. Both spatial and temporal analysis for linear stability has been performed along with the investigation of weakly nonlinear waves, leading the free-surface equation into the famous Kuramoto–Sivashinsky equation. Periodic stationary wave solutions of the full evolution equation confirm the existence of two significant wave families, γ1 and γ2, which are discussed in detail. Formation of the dynamical system and study of different bifurcation analysis and phases diagrams are also studied. The spatiotemporal evolution of the model has been analyzed numerically for different values of the odd viscosity parameter and Marangoni number. The odd viscosity gives stabilizing effect while the increase in Marangoni number increases the instability.

mechanics,physics, fluids & plasmas
On the Stability and Bifurcation of Marangoni Convection of Two Immiscible Liquids with a Nondeformable Interface

Chao Xing,Daozhi Han,Quan Wang

DOI: https://doi.org/10.1137/23m1584174

2024-06-13

SIAM Journal on Applied Dynamical Systems

Abstract:SIAM Journal on Applied Dynamical Systems, Volume 23, Issue 2, Page 1313-1344, June 2024. This article investigates the nonlinear stability and dynamic bifurcation for the equations governing the Marangoni convection of two superimposed immiscible liquids subject to temperature gradient perpendicular to the plate. First, we obtain the critical value of the Marangoni number and verify the stability exchange principle by adopting a hybrid method that combines theoretical analysis and numerical calculations. Second, we employ the energy method, probing the nonlinear stability and establishing the nonlinear thresholds of the Marangoni number. Third, we apply the technique of center manifold reduction to reduce the corresponding infinite-dimensional model to finite-dimensional ODEs. According to the ODEs, we establish a dynamic bifurcation theorem with the transition number that determines the bifurcation type of the model. Finally, we determine the nondimensional transition number and present related temporal and flow patterns by performing careful numerical computation.

mathematics, applied,physics, mathematical
Temporal instability of a confined nano-liquid film with the Marangoni convection effect: viscous potential theory

Galal M. Moatimid,Mohamed A. Hassan,Mona A. A. Mohamed

DOI: https://doi.org/10.1007/s00542-020-04772-2

2020-02-11

Microsystem Technologies

Abstract:The current paper utilizes the viscous potential theory to analyze the temporal stability of a swirling annulus of two nano gas–liquid layers. The analysis depends mainly on the normal mode technique. The distributions of the heat, volume fraction, and velocity field are achieved. Furthermore, surface tension is considered as a function of the heat and the volume fraction distributions. Therefore, the impact of the Marangoni convection is taken into account. The balance of the normal stress tensor at the interface yields a complicated transcendental dispersion equation. Actually, this equation has no exact solution. Consequently, numerical calculations are established to indicate the relation between the growth rate and the wavenumber of the surface waves. Graphically, the influences of the various physical parameters are depicted. It is found that the Brownian motion accelerates the particles which leads to a destabilization of the interface. Simultaneously, the thermophoresis produces a motion of hot particles from the interface towards the boundaries, which stabilizes the interface. Furthermore, the increase of the surface tension, due to the Marangoni effect, enhances the interface rigidity and stabilizes it.
Marangoni Interfacial Instability Induced by Solute Transfer Across Liquid-Liquid Interfaces

Xiangwei Li,Dongdong Wan,Mengqi Zhang,Huanshu Tan

2024-04-24

Abstract:This study presents analytical and numerical investigations of Marangoni interfacial instability in a two-liquid-layer system with constant solute transfer across the liquid interface. Previous research has demonstrated that both viscosity ratio and diffusivity ratio can influence the system's hydrodynamic stability via the Marangoni effect, but the distinctions in process and mechanisms are not yet fully understood. To gain insights, we developed a numerical model based on the phase-field method, rigorously validated against linear stability analysis. The parameter space explored encompasses Schmidt number ($Sc \in [0.2, 200]$), Marangoni number ($Ma_c \in [10, 2000]$), Capillary number ($Ca \in [0.01, 1]$), viscosity ratio ($\zeta_\mu \in [0.1, 10]$), and diffusivity ratio ($\zeta_D \in [0.1, 10]$). We identified two key characteristics of Marangoni instability: the self-amplification of triggered Marangoni flows in flow-intensity-unstable case and the oscillation of flow patterns during flow decay in flow-intensity-stable case. Direct numerical simulations incorporating interfacial deformation and nonlinearity confirm that specific conditions, including solute transfer out of a higher viscous or less diffusive layer, amplify and sustain Marangoni interfacial flows. Furthermore, the study highlights the role of interfacial deformation and unequal solute variation in system instability, proposing corresponding instability mechanisms. Notably, traveling waves are observed in the flow-intensity-stable case, correlating with the morphological evolution of convection rolls. These insights contribute to a comprehensive understanding of Marangoni interfacial instability in multicomponent fluids systems, elucidating the mechanisms underlying variations in viscosity and diffusivity ratios across liquid layers.

Fluid Dynamics
Stability of thin fluid films characterised by a complex form of structural/effective disjoining pressure

Michael-Angelo Y.-H. Lam,Linda J. Cummings,Lou Kondic

DOI: https://doi.org/10.1017/jfm.2017.919

2017-04-13

Abstract:We discuss instabilities of fluid films of nanoscale thickness, with a particular focus on films where the destabilising mechanism allows for linear instability, metastability, and absolute stability. Our study is motivated by nematic liquid crystal films; however we note that similar instability mechanisms, and forms of the effective disjoining pressure, appear in other contexts, such as the well-studied problem of polymeric films on two-layered substrates. The analysis is carried out within the framework of the long-wave approximation, which leads to a fourth order nonlinear partial different equation for the film thickness. Within the considered formulation, the nematic character of the film leads to an additional contribution to the disjoining pressure, changing its functional form. This effective disjoining pressure is characterised by the presence of a local maximum for non-vanishing film thickness. Such a form leads to complicated instability evolution that we study by analytical means, including application of marginal stability criteria, and by extensive numerical simulations that help us develop a better understanding of instability evolution in the nonlinear regime. This combination of analytical and computational techniques allows us to reach novel understanding of relevant instability mechanisms, and of their influence on transient and fully developed fluid film morphologies.

Soft Condensed Matter
Bénard-Marangoni instability on evaporating menisci in capillary channels

Zhenhai Pan,Hao Wang

DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2013.03.082

IF: 5.2

2013-01-01

International Journal of Heat and Mass Transfer

Abstract:Despite numerous studies about Marangoni instabilities, there are very few of them conducted for the menisci in microscale channels or tubes. In this paper, the onset of Marangoni flow on an initially isothermal meniscus in a capillary channel is studied. The temperature gradient perpendicular to the meniscus is found arousing a Bénard–Marangoni instability when the channel size or the temperature gradient beyond certain values. The threshold Marangoni Number for the instability is obtained, which turns out to be dependent on the Biot Number. The evolution of the meniscus flow patterns with increasing Marangoni Number is studied. The influences of gravity are discussed. The present work is a preliminary step to a comprehensive understanding of Marangoni instability in capillary structures. The temperature gradient that is perpendicular to the meniscus should be paid attention to in the related applications.
Marangoni convection in binary mixtures with Soret effect

A. BERGEON,D. HENRY,H. BENHADID,L. S. TUCKERMAN

DOI: https://doi.org/10.1017/s0022112098002614

IF: 3.7

1998-11-25

Journal of Fluid Mechanics

Abstract:Marangoni convection in a differentially heated binary mixture is studied numerically by continuation. The fluid is subject to the Soret effect and is contained in a two-dimensional small-aspect-ratio rectangular cavity with one undeformable free surface. Either or both of the temperature and concentration gradients may be destabilizing; all three possibilities are considered. A spectral-element time-stepping code is adapted to calculate bifurcation points and solution branches via Newton's method. Linear thresholds are compared to those obtained for a pure fluid. It is found that for large enough Soret coefficient, convection is initiated predominantly by solutal effects and leads to a single large roll. Computed bifurcation diagrams show a marked transition from a weakly convective Soret regime to a strongly convective Marangoni regime when the threshold for pure fluid thermal convection is passed. The presence of many secondary bifurcations means that the mode of convection at the onset of instability is often observed only over a small range of Marangoni number. In particular, two-roll states with up-flow at the centre succeed one-roll states via a well-defined sequence of bifurcations. When convection is oscillatory at onset, the limit cycle is quickly destroyed by a global (infinite-period) bifurcation leading to subcritical steady convection.

mechanics,physics, fluids & plasmas
The stability analysis of volatile liquid films in different evaporation regimes

Omair A. A. Mohamed,Luca Biancofiore

2024-06-03

Abstract:We investigate the role of the evaporation regime on the stability of a volatile liquid film flowing over an inclined heated surface while considering the dynamics of both the liquid phase and the diffusion of its vapor. We (i) modify the kinetic-diffusion evaporation model of Sultan et al. [Sultan et al., J. Fluid Mech. 543, 183, (2005)] to allow for the reduction in film thickness caused by evaporative mass loss, (ii) combine it with the liquid film formulation of Joo et al. [Joo et al., J. Fluid Mech. 230, 117, (1991)], and then (iii) utilize long-wave theory to derive a governing equation encapsulating the effects of inertia, hydrostatic pressure, surface tension, thermocapillarity, and evaporation. The system's dispersion relationship reveals that the Marangoni effect has two distinct components. The first results from surface tension gradients driven by the uneven heating of the liquid interface and is always destabilizing, while the second arises from surface tension gradients caused by imbalances in its latent cooling tied to vapor diffusion above it and is either stabilizing or destabilizing depending on the evaporation regime. These two components interact with evaporative mass loss and vapor recoil in a rich and dynamic manner. Moreover, we identify an evaporation regime where the kinetic and diffusion phenomena are precisely balanced and we clarify the dependence of the mass loss instability on the wave number, which we attribute to the presence of a variable vapor gradient above the liquid. Furthermore, we investigate the effect of film thinning on its stability at the two opposing limits of the evaporation regime. Finally, we conduct a spatiotemporal analysis which indicates that the strength of vapor diffusion effects is generally correlated with a shift towards absolute instability, while the thinning of the film can cause convective-to-absolute-to-convective transitions.

Fluid Dynamics,Mathematical Physics
Solutal Marangoni instability in layered two-phase flows

Jason R. Picardo,Radhakrishna T.G.,S. Pushpavanam

DOI: https://doi.org/10.1017/jfm.2016.135

2016-02-12

Abstract:In this paper, the instability of layered two-phase flows caused by the presence of a soluble surfactant (or a surface active solute) is studied. The fluids have different viscosities, but are density matched to focus on Marangoni effects. The fluids flow between two flat plates, which are maintained at different solute concentrations. This establishes a constant flux of solute from one fluid to the other in the base state. A linear stability analysis is performed, using a combination of asymptotic and numerical methods. In the creeping flow regime, Marangoni stresses destabilize the flow, provided a concentration gradient is maintained across the fluids. One long wave and two short wave Marangoni instability modes arise, in different regions of parameter space. A well-defined condition for the long wave instability is determined in terms of the viscosity and thickness ratios of the fluids, and the direction of mass transfer. Energy budget calculations show that the Marangoni stresses that drive long and short wave instabilities have distinct origins. The former is caused by interface deformation while the latter is associated with convection by the disturbance flow. Consequently, even when the interface is non-deforming (in the large interfacial tension limit), the flow can become unstable to short wave disturbances. On increasing $Re$, the viscosity-induced interfacial instability comes into play. This mode is shown to either suppress or enhance the Marangoni instability, depending on the viscosity and thickness ratios. This analysis is relevant to applications such as solvent extraction in microchannels, in which a surface-active solute is transferred between fluids in parallel stratified flow. It is also applicable to the thermocapillary problem of layered flow between heated plates.

Fluid Dynamics
Marangoni instability in oblate droplets suspended on a circular frame

M.A. Shishkin,K.S. Kolegov,S.A. Pikin,B.I. Ostrovskii,E.S. Pikina

DOI: https://doi.org/10.1063/5.0154444

2023-04-28

Abstract:We study theoretically internal flows in a small oblate droplet suspended on the circular frame. Marangoni convection arises due to a vertical temperature gradient across the drop and is driven by the surface tension variations at the free drop interface. Using the analytical basis for the solutions of Stokes equation in coordinates of oblate spheroid we have derived the linearly independent stationary solutions for Marangoni convection in terms of Stokes stream functions. The numerical simulations of the thermocapillary motion in the drops are used to study the onset of the stationary regime. Both analytical and numerical calculations predict the axially-symmetric circulatory convection motion in the drop, the dynamics of which is determined by the magnitude of the temperature gradient across the drop. The analytical solutions for the critical temperature distribution and velocity fields are obtained for the large temperature gradients across the oblate drop. These solutions reveal the lateral separation of the critical and stationary motions within the drops. The critical vortices are localized near the central part of a drop, while the intensive stationary flow is located closer to its butt end. A crossover to the limit of the plane film is studied within the formalism of the stream functions by reducing the droplet ellipticity ratio to zero value. The initial stationary regime for the strongly oblate drops becomes unstable relative to the many-vortex perturbations in analogy with the plane fluid films with free boundaries.

Fluid Dynamics,Soft Condensed Matter
Thermocapillary thin films: periodic steady states and film rupture

Gabriele Bruell,Bastian Hilder,Jonas Jansen

DOI: https://doi.org/10.1088/1361-6544/ad2a8a

2024-03-14

Nonlinearity

Abstract:We study stationary, periodic solutions to the thermocapillary thin-film model 0,\ x\in \mathbb{R},$?> ∂ t h + ∂ x h 3 ∂ x 3 h − g ∂ x h + M h 2 1 + h 2 ∂ x h = 0 , t > 0 , x ∈ R , which can be derived from the Bénard–Marangoni problem via a lubrication approximation. When the Marangoni number M increases beyond a critical value M ∗ , the constant solution becomes spectrally unstable via a (conserved) long-wave instability and periodic stationary solutions bifurcate. For a fixed period, we find that these solutions lie on a global bifurcation curve of stationary, periodic solutions with a fixed wave number and mass. Furthermore, we show that the stationary periodic solutions on the global bifurcation branch converge to a weak stationary periodic solution which exhibits film rupture. The proofs rely on a Hamiltonian formulation of the stationary problem and the use of analytic global bifurcation theory. Finally, we show the instability of the bifurcating solutions close to the bifurcation point and give a formal derivation of the amplitude equation governing the dynamics close to the onset of instability.

mathematics, applied,physics, mathematical
Stability of traveling waves of a thermoviscous liquid film down the outer surface of a cylinder

Garima Singh and Naveen Tiwari

DOI: https://doi.org/10.1103/physrevfluids.9.024002

IF: 2.895

2024-02-14

Physical Review Fluids

Abstract:A liquid film coating a cylindrical substrate is unstable to interfacial disturbances governed by Rayleigh-plateau instability. These initial disturbances grow in time and, beyond saturation, develop into a train of droplets of equal amplitude that move downstream at the same velocity. The traveling wave profiles, formed by a thermoviscous fluid as it flows down the exterior of a nonisothermal vertical cylinder, are computed as a function of various parameters. Further, this study investigates the stability behavior of these traveling waves. An unstable film leads to the formation of an axially asymmetric pattern. The influence of the thermoviscous nature of the fluid, along with the Biot number, Marangoni number, and Bond number, has been investigated. Linear stability analysis is performed by perturbing the axisymmetric traveling wave solution in the azimuthal direction. It is shown that while a gravity mode exists at small wave numbers, a thermocapillary mode exists at large wave numbers. The streamline patterns are shown to be consistent with the presence of the thermocapillary mode. The nonlinear analysis shows that the chosen pattern of instability does not correspond to the largest growth rate but is governed by the wavelength conforming to the periodic confinement in the azimuthal direction. An interesting pattern evolves in the presence of more than one such conforming wavelength. https://doi.org/10.1103/PhysRevFluids.9.024002 ©2024 American Physical Society

physics, fluids & plasmas
Momentum transport of morphological instability in fluid displacement with changes in viscosity

Takahiko Ban,Hibiki Ishii,Atsushi Onizuka,Atanu Chatterjee,Ryuta X. Suzuki,Y. Nagatsu,Manoranjan Mishra

DOI: https://doi.org/10.1039/d3cp03402j

IF: 3.3

2024-01-24

Physical Chemistry Chemical Physics

Abstract:Saffman-Taylor instability exhibits a stepwise unstable morphology from a stable interface to viscous fingering, eventually leading to tip splitting. The nonlinear dynamics of the destabilized interface depends on various flow properties. However, the physicochemical mechanism that determines the transition point of the flow state is unclear. We studied the interfacial instability transition in miscible displacement from a thermodynamic perspective by calculating the momentum transport and entropy production. Using numerical analysis based on Darcy's law coupled with the convection-diffusion equation, the observed flux-dependent flow state transitions were attributed to the selection of the flow state with a higher entropy production.

chemistry, physical,physics, atomic, molecular & chemical
Analysis of a Diffuse-Interface Model for the Binary Viscous Incompressible Fluids with Thermo-Induced Marangoni Effects

Hao Wu,Xiang Xu

DOI: https://doi.org/10.4310/cms.2013.v11.n2.a15

2013-01-01

Communications in Mathematical Sciences

Abstract:In this paper we study the well-posedness and long-time dynamics of a diffuse-interface model for the mixture of two viscous incompressible Newtonian fluids with thermo-induced Marangoni effects. The governing system consists of modified Navier--Stokes equations coupled with phase-field and energy transport equations. We first derive an energy inequality that illustrates the dissipative nature of the system under the assumption that the initial temperature variation is properly small. Then we establish the existence of weak/strong solutions via the energy method and discuss the long-time dynamics as well as stability of the system.
Linear stability of a surfactant-laden viscoelastic liquid flowing down a slippery inclined plane

Subham Pal,Arghya Samanta

DOI: https://doi.org/10.1063/5.0050363

IF: 4.6

2021-05-01

Physics of Fluids

Abstract:A study of linear stability analysis of a surfactant-laden viscoelastic liquid flowing down a slippery inclined plane is carried out under the framework of Orr–Sommerfeld type eigenvalue problem. It is assumed that the viscoelastic liquid satisfies the rheological property of Walters' liquid <math> B ″</math>. The Orr–Sommerfeld type eigenvalue problem is solved analytically and numerically based on the long-wave analysis and Chebyshev spectral collocation method, respectively. The long-wave analysis predicts the existence of two temporal modes, the so-called surface mode and surfactant mode, where the first order temporal growth rate for the surfactant mode is zero. However, the first order temporal growth rate for the surface mode is non-zero, which leads to the critical Reynolds number for the surface mode. Further, it is found that the critical Reynolds number for the surface mode reduces with the increasing value of viscoelastic coefficient and ensures the destabilizing effect of viscoelastic coefficient on the primary instability induced by the surface mode in the long-wave regime. However, the numerical result demonstrates that the viscoelastic coefficient has a non-trivial stabilizing effect on the surface mode when the Reynolds number is far away from the onset of instability. Further, if the Reynolds number is high and the inclination angle is sufficiently low, there exists another mode, namely the shear mode. The unstable region induced by the shear mode magnifies significantly even for the weak effect of viscoelastic coefficient and makes the transition faster from stable to unstable flow configuration for the viscoelastic liquid. Moreover, the slip length exhibits a dual role in the surface mode as reported for the Newtonian liquid. But it exhibits only a stabilizing effect on the shear mode. In addition, it is found that the Marangoni number also exhibits a dual nature on the primary instability induced by the surface mode in contrast to the result of the Newtonian liquid.

mechanics,physics, fluids & plasmas
Effect of thermodynamic instability on viscous fingering of binary mixtures in a Hele-Shaw cell

Min Chan Kim,Lopamudra Palodhi,Joung Sook Hong,Manoranjan Mishra

DOI: https://doi.org/10.1017/jfm.2023.642

2023-10-03

Journal of Fluid Mechanics Digital Archive

Abstract:The coupled effects of thermodynamic and hydrodynamic instabilities are studied during viscous fingering (VF). We introduced a modified Cahn–Hilliard phase-field model in conjunction with the Korteweg force in the classical VF model and derived consistent governing equations. The free energy of the partially miscible system is described using a modified Flory–Huggins model, which allows us to investigate the temporal evolution of spatial inhomogeneities. The mass flux in the Cahn–Hilliard equations is modified according to modern diffusion theory. The governing equations have been solved through an in-house model implementation using the COMSOL multiphysics software. We successfully demonstrated the transition from the finger-like structures to the droplet formation during spinodal decomposition as demonstrated experimentally in the literature. Our results are also in agreement with earlier numerical results obtained using a classical Landau type mixing energy. We further systematically studied the effects of the Margules parameter (interaction parameter) and the gradient parameter, which is associated to the thermodynamic length scale and capillary number on the VF. Aysmmetric features of the binary mixture are also investigated showing a stronger thermodynamic effect on the system with increasing phase separation and, hence, droplet formation.
Instabilities in strongly shear-thinning viscoelastic flows through channels and tubes

Ramkarn Patne,Shraddha Mandloi,V. Shankar,Ganesh Subramanian

2024-08-02

Abstract:The linear stability of a shear-thinning, viscoelastic fluid undergoing any of the canonical rectilinear shear flows, viz., plane Couette flow and pressure-driven flow through a channel or a tube is analyzed in the creeping-flow limit using the White--Metzner model with a power-law variation of the viscosity with shear rate. While two-dimensional disturbances are considered for plane Couette and channel flows, axisymmetric disturbances are considered for pressure-driven flow in a tube. For all these flows, when the shear-thinning exponent is less than $0.3$, there exists an identical instability at wavelengths much smaller than the relevant geometric length scale (gap between the plates or tube radius). There is also a finite-wavelength instability in these configurations governed by the details of the geometry and boundary conditions at the centerline of the channel or tube. The most unstable mode could be either of the short-wave or finite-wavelength instabilities depending on model parameters. For pressure-driven channel flow, it is possible to have sinuous or varicose unstable modes depending on the symmetry of the normal velocity eigenfunction about the channel centerline. This difference in symmetry is relevant only for the finite wavelength instability, in which case sinuous modes turn out to be more unstable, in accordance with experimental observations. In all the three configurations, the short wavelength unstable modes are localized near the walls, and are insensitive to symmetry conditions at the centerline. It is argued that this instability should be a generic feature in any wall-bounded shear flow of strongly shear-thinning viscoelastic fluids. Our predictions for the finite-wavelength instability in pressure-driven channel and pipe flows are in good agreement with experimental observations for the flow of concentrated polymer solutions in these geometries.

Fluid Dynamics,Soft Condensed Matter

Marangoni instability in a viscoelastic binary film with cross-diffusive effect

Thermosolutal Marangoni instability in a viscoelastic liquid film: effect of heating from the free surface

Instabilities of Marangoni and elasticity in a molten polymer film

Marangoni Flows in a Bilayer Liquid Microfilm Interface on Wave-Contoured Hot Substrates

Thermocapillary instability and wave formation on a viscous film flowing down an inclined plane with linear temperature variation: Effect of odd viscosity

On the Stability and Bifurcation of Marangoni Convection of Two Immiscible Liquids with a Nondeformable Interface

Temporal instability of a confined nano-liquid film with the Marangoni convection effect: viscous potential theory

Marangoni Interfacial Instability Induced by Solute Transfer Across Liquid-Liquid Interfaces

Stability of thin fluid films characterised by a complex form of structural/effective disjoining pressure

Bénard-Marangoni instability on evaporating menisci in capillary channels

Marangoni convection in binary mixtures with Soret effect

The stability analysis of volatile liquid films in different evaporation regimes

Solutal Marangoni instability in layered two-phase flows

Marangoni instability in oblate droplets suspended on a circular frame

Thermocapillary thin films: periodic steady states and film rupture

Stability of traveling waves of a thermoviscous liquid film down the outer surface of a cylinder

Momentum transport of morphological instability in fluid displacement with changes in viscosity

Analysis of a Diffuse-Interface Model for the Binary Viscous Incompressible Fluids with Thermo-Induced Marangoni Effects

Linear stability of a surfactant-laden viscoelastic liquid flowing down a slippery inclined plane

Effect of thermodynamic instability on viscous fingering of binary mixtures in a Hele-Shaw cell

Instabilities in strongly shear-thinning viscoelastic flows through channels and tubes