Abstract:Current demand for waste recycling, phosphogypsum-based excess-sulphate slag cement (PESSC) as a sustainable cement prepared by solid wastes, urges enhancing its performance development based on microstructure optimisation. For the purpose of improving the performance and durability of PESSC used in normal or corrosive environments, it is deemed an efficient technique to produce iron-doped compounds with high thermodynamic stability. This paper presents a systematic study of the effect of iron modification on PESSC binders by introducing 0%-2% polyferric sulphate (PFS) from a multiscale viewpoint. XPS, 29Si and 27Al NMR, and TEM were used to characterise the nanostructure of solid particles firstly at Level I. Then, the chemical composition and phase assemblage of PESSC binders were revealed at Level II in terms of ICC, ICP, DTG-DSC, FTIR, BSE-EDS and XRD. Finally, setting time and strength development were determined at Level III. Results indicated that the soluble FeOH4- supplied by the hydrolysis of PFS promotes the generation of iron-doped ettringite with a greater length-to-diameter ratio and thermodynamic stability. Seeding effect of iron doping also promotes the production of spherical and retiform gels with a slight influence on the chemical components and polymerisation. Despite the fact that iron doping weakens the early strength of PESSC mortars, it promotes the persistent hydration rate by retarding precipitation and encapsulation of hydrates on the surface of the slag, showing excellent strength in the later stages. In view of microstructure evolution and performance development during each stage, PFS supplementation within 1.0% is considered a feasible modification of PESSC relying on the formation control of iron-doped hydrates.

Effect of PFDTS/TiO 2 Coating on Microstructure and Wetting Behavior of Phosphogypsum

Preparation and Performance of H-PDMS/PMHS/OTS Hybrid Nanosilica Hydrophobic and Self-Cleaning Coatings on Phosphogypsum Surface

Study of Semi-Dry High Target Solidification/Stabilization of Harmful Impurities in Phosphogypsum by Modification

An effective treatment method for phosphogypsum

Efficient precipitation of soluble phosphorus impurities in the recycling of phosphogypsum to produce hemihydrate gypsum

Synthesis of reticular long-carbon-chain polysiloxane and its hydrophobic modification of phosphogypsum-based materials

Study on Strengthening the Crystallization Process of Removing F and P from Phosphogypsum Produced by Dihydrate–Hemihydrate Wet Process

Green and Sustainable Superhydrophobic Phosphogypsum Mortar Coating with Self-Cleaning Properties and Water Resistance

Functional Hydrophobic Coating for Phosphogypsum Via Stoichiometric Silanization, Hydrophobic Characterization, Microstructure Analysis, and Durability Evaluation

Influence of phosphogypsum on mechanical properties and microstructure of iron tailings cementitious material

Advances in Phosphogypsum Calcination and Decomposition Processes in Circulating Fluidized Beds

Study on the Mechanical Properties, Microstructure and Hydration Mechanism of Phosphogypsum-Based Geopolymer Cement with Added Micron-Sized Silica Particles

Effects of phosphogypsum on hydration properties and strength of calcium aluminate cement

A Sustainable Composite Cementitious Material Manufactured by Phosphogypsum Waste

Role of polyferric sulphate in hydration regulation of phosphogypsum-based excess-sulphate slag cement: A multiscale investigation

Synthesis of an efficient adsorbent from titanium gypsum for phosphate removal: Effect of co-presence of waste sludge

Optimization of wet-process phosphoric acid for high-quality phosphogypsum

PURIFICATION OF PHOSPHOGYPSUM FOR USE AS CEMENT RETARDER BY SULPHURIC ACID TREATMENT

Development and optimization of phosphogypsum-based geopolymer cement

Effect of soluble fluorine on the hydration, strength and microstructure of hemihydrate phosphogypsum