Abstract:Electrocatalytic upcycling of nitrate (NO 3 − ) in wastewater into the valuable ammonium-based fertilizer has been considered as a green and appealing alternative to biological nitrogen removal or the industrial ammonia (NH 3 ) production processes. This work investigated an innovative and energy-efficient electrolysis flow-through cell consisting of a porous activated iron nickel (FeNi) alloy cathode and a hollow polypropylene fiber membrane extraction unit to realize the electrochemical NO 3 − reduction and simultaneous upcycling to ammonium sulphate salts ((NH 4 ) 2 SO 4 ). Cathodic and anodic electrochemical half-reactions were coupled to enable NO 3 − reduction to ammonia and in-situ acid/base productions to promote the membrane stripping of NH 3 . Our results show that after electrolysis operation for 14 h for a synthetic wastewater containing 150 mM NO 3 − under a cathodic current density of 30 mA·cm −2 , 99 % of NO 3 − removal efficiency, 98 % of ammonia selectivity, 93 % of Faradic efficiency and 97 % of total ammonia nitrogen (TAN) recovery were achieved respectively. A NH 3 recovery flux and a specific energy consumption reached 2050 g-(NH 4 ) 2 SO 4 ·m −2 ·d −1 and 11 kWh·kg −1 -(NH 4 ) 2 SO 4 , respectively, which outcompetes many reported processes. Direct electron transfer was the main mechanisms of electrochemical NO 3 − reduction to ammonia. Interfacial reaction thermodynamics and kinetics analysis of key intermediates (e.g., *NO 3 , *NO 2 , and *NO) shows that the NiFe 2 O 4 (3 1 1)-Ni site on the thermally activated FeNi alloy surface exhibited higher reactivity and specificity toward electrochemical NO 3 − reduction to ammonia over nitrogen (N 2 ) or hydrogen (H 2 ) generation. Ultimately, this study aims to promote sustainable nitrogen nutrient recovery and ammonia fertilizer synthesis from wastewater treatment.

Simultaneous Removal of Ammonia and Nitrate from Wastewater Using a Pulse Electrolysis Technique

Electrocatalytic Upcycling of Nitrate Wastewater into an Ammonia Fertilizer via an Electrified Membrane.

Electrified Conversion of Contaminated Water to Value: Selective Conversion of Aqueous Nitrate to Ammonia in a Polymer Electrolyte Membrane Cell

Pulsed Nitrate-to-Ammonia Electroreduction Facilitated by Tandem Catalysis of Nitrite Intermediates

Pulsed electro-catalysis enables effective conversion of low-concentration nitrate to ammonia over Cu 2 O@Pd tandem catalyst

Reactive Separation of Ammonia from Wastewater Nitrate via Molecular Electrocatalysis

Direct recovery of electro-synthesized ammonia from low-concentration nitric oxide using pulse electrodeposited Cu/C catalyst in a catholyte-free system

Efficient removal of ammonia nitrogen via a coupled system of Ni 1 Cu 0.2 -Se-T/CP anode and copper foam cathode

Simultaneous reduction of nitrate and oxidation of by-products using electrochemical method.

Coupling nitrate capture with ammonia production through bifunctional redox-electrodes

Atom-dispersed Copper and Nano-Palladium in the Boron-Carbon-nitrogen Matric Cooperate to Realize the Efficient Purification of Nitrate Wastewater and the Electrochemical Synthesis of Ammonia

Mechanism and optimization of electrochemical system for simultaneous removal of nitrate and ammonia

Enhanced Electrocatalytic Conversion of Nitrates to Ammonia: Fuel from Waste

Boosting Electrocatalytic Ammonia Synthesis from Nitrate with a Dual Active Site Three-Dimensional Copper Electrode

Highly Porous Copper Catalysts for Electrochemical Ammonia Production from Nitrate-Containing Waste Water

Enhancing Hydrogen Diffusion in Catalytic Removal of Nitrate Using a Flow Reactor

Upcycling wastewater nitrate into ammonia fertilizer via concurrent electrocatalysis and membrane extraction

Electronic Metal–Support Interaction Triggering Interfacial Charge Polarization over CuPd/N‐Doped‐C Nanohybrids Drives Selectively Electrocatalytic Conversion of Nitrate to Ammonia

Electrical Pulse‐Driven Periodic Self‐Repair of Cu‐Ni Tandem Catalyst for Efficient Ammonia Synthesis from Nitrate

Application of Pd-Sn modified Ru-Ir electrode for treating high chlorine ammonia-nitrogen wastewater

High‐performance Ammonia Electrosynthesis from Nitrate in a NaOH‐KOH‐H2O Ternary Electrolyte