Abstract:Cracking is the precursor of the final fracture for most engineering materials, often affected by various microstructural characteristics including grain orientation, boundary, precipitation, etc. In this study, the fracture behaviour of a typical Ni-based complex concentrated alloy (CCA) was systematically investigated. These CCAs were fabricated using fine-grain casting and directional-solidification processes, which consists of quasi-single crystal (QSC) and poly crystalline structures respectively. Quasi-static tensile test results combined with morphology characterizations and crystal plasticity analyses suggest that microcracks tend to nucleate at the matrix/carbide interfaces in QSC and then propagate along the maximum slip direction at the crack tips. The crack path showed a distinctive zig-zag shape, beneficial for consuming the crack propagation energy. In consideration of carbide morphology, script-typed carbides were found to be very effective in hindering dislocation movements, resulting in admirable work hardening ability. In polycrystalline, however, microcracks are commonly found near the carbides that precipitate at grain boundaries, then developed quickly to connect with each other, leading to premature intergranular fracture. Grain boundary carbides were detrimental to mechanical performance. Considering the large amounts of investigations on second phase and precipitation, these new findings about carbide-related crack behaviours could be extended to other second phase hardening materials, providing new routes to design high-performance alloys by controlling the precipitation morphology and position.

Crack propagation behavior in the stacked – core–shell composites

Numerical analysis of fracture in core-shell particle reinforced composites

Finite element simulation of mechanical properties of TaC-based core/graphite shell fibrous monolithic ceramics

Crack Path Selection in Orientationally Ordered Composites

Crack tip shielding and size effect related to parallel edge cracks under uniaxial tensile loading

A Simulation Study on the Crack Propagation Behavior of Nanostructured Thermal Barrier Coatings with Tailored Microstructure

Compressive performance and crack propagation in Al alloy/Ti2AlC composites

Frictional Sliding of Microcracks under Compression

Unraveling Crack Stability and Strain Localization in Staggered Composites by Fracture Analysis on the Shear-Lag Model

Numerical and experimental studies on crack nucleation and propagation in thin films

Predicting and visualizing crack propagation in nuclear graphite

Crack initiation and propagation dominated by strain localization in quasi-single crystal and poly-crystalline of a Ni-based complex concentrated alloy

A New Method to Measure Crack Extension in Nuclear Graphite Based on Digital Image Correlation

Mechanisms Governing the Failure Modes of Dense Vertically Cracked Thermal Barrier Coatings

Internal 3D Cracks Evolution and the Toughening Mechanisms of the Hierarchical Structures in Strombus Gigas Shell

Phase-field simulation of crack propagation in particulate nanocomposite materials considering surface stresses

Mitigating Crack Propagation in Hybrid Composites: An Experimental and Computational Study

A Monte Carlo simulation of damage and failure process with crack saturation for unidirectional fiber reinforced ceramic composites

Observing the crack tip behaviour at the nanoscale during fracture of ceramics

A Microcracking-Based Model for the Dynamic Failure of Carbon/carbon Composites

Multi-scale Study of Subsurface Fatigue Cracking Behavior of Laser-Powder Bed Fused Inconel 718 at Stress Ratios and Temperatures