Abstract:The reasonable stopping top coal caving distance, main roof's fracture line position, and large section roadway during the stopping period (LSRSP) support method of the header face of 15 m extra‐thick coal seam are systematically studied by using field measurement, experiment, numerical simulation, and similar material simulation methods Extra‐thick coal seams are widely distributed in the Datong mine area in China. The rapid stopping of mining and the support withdrawal technology for extra‐thick coal seams need to be developed urgently. The reasonable stopping top coal caving distance, main roof's fracture line position, and large section roadway during the stopping period (LSRSP) support method of the header face of 15 m extra‐thick coal seam are systematically studied by using field measurement, experiment, numerical simulation, and similar material simulation methods. With the increase in stopping coal caving distance, the range of the medium and low displacement zone of the LSRSP overburden gradually expands. In contrast, the depth of the plastic zone decreases. The scope and intensity of the high‐stress area of the overlying rock in front gradually decrease and shift from deep to the outside, while the peak stress area shifts from the top coal area to the coal rib of the retracement channel. Comparing the stopping of medium‐thick and thick coal seam working face, the interaction between "main roof−unmined top coal−supports" is analyzed. The unique characteristics of the extra‐thick coal seam working face are derived: when the stopping coal caving distance is shorter than the length of the key block, the dropped coal body cannot effectively restrict the movement of key blocks. Mutual compression and subsidence occur between key blocks, making the broken coal rock block squeeze into the supports. By the simulation study of each index, the stopping coal caving distance of the extra‐thick coal seam is optimal when it is slightly larger than the length of the key block (i.e., the periodic weighting step), simultaneously, the main roof fracture line behind the supports is most favorable for stopping mining. After ensuring the stability of the LSRSP's overburden structure, the differentiated support scheme of "controlled zoning−strength grading" was proposed, and the scheme was modified and verified by simulating the support prestress field. After field practice, the roof of the retracement channel is better controlled in deformation under the joint horizontal and vertical support, the robust control effect of the combined anchor cable is noticeable, the integrity of the polyurethane network is more substantial, and the working face supports have successfully achieved a safe and rapid evacuation.

Influencing Factors and Adaptability of Working Face Length in Deep Thick Coal Seam

Three-peak evolution characteristics of supporting stress on a super-long working face in a thick coal seam

Abutment Pressure Distribution Law and Support Analysis of Super Large Mining Height Face

Research on the Mechanism and Control Technology of Coal Wall Sloughing in the Ultra-Large Mining Height Working Face

Study on the Laws of Overlying Strata Movement of Repeated Mining of Close Distance Thick Coal Seam Under Large Surface Water

Abnormal ore pressure mechanism of working face under the influence of overlying concentrated coal pillar

Study on the failure mechanism and stability control measures in a large-cutting-height coal mining face with a deep-buried seam

Study on Characteristics of Front Abutment Pressure and Rational Stop-Mining Coal Pillar Width in Large Height Working Face

The Influences of Key Strata Compound Breakage on the Overlying Strata Movement and Strata Pressure Behavior in Fully Mechanized Caving Mining of Shallow and Extremely Thick Seams: A Case Study

Pressure Relief and Bolt Grouting Reinforcement and Width Optimization of Narrow Coal Pillar for Goaf-Side Entry Driving in Deep Thick Coal Seam: A Case Study

Mine Pressure Behavior of Gob-Side Entry Retaining by Roof Cutting in Closely Spaced Coal Seams

Determination of working resistance of support parameter variation of large mining height support: the case of Caojiatan coal mine

Study on Surrounding Rock Control and Support Stability of Ultra-Large Height Mining Face

Effect of Mining Thickness on Overburden Movement and Underground Pressure Characteristics for Extrathick Coal Seam by Sublevel Caving with High Bottom Cutting Height

Main controlling factors to determine depth of failure zone in complete floor of coal seam based on field measurements

Surface damage reduction effect of ultra-high working face in Shangwan coal mine

Measurement and Numerical Analysis of Influence of Key Stratum Breakage on Mine Pressure in Top-Coal Caving Face with Super Great Mining Height

Multiscale study on coal pillar strength and rational size under variable width working face

Research on Stress Change and Deformation Monitoring of Coal Pillar Between Two Longwall Coal Faces

Reasonable stopping method and retracement channel support at fully mechanized top coal caving working face of 15 m extra‐thick coal seam: A case study