Abstract:Photocatalytic membranes are effective in removing organic dyes, but their low UV resistance poses a challenge. To address this, self-protected photocatalytic PVDF membranes were developed using polyaniline (PANI) and polydopamine (PDA), whaich are anti-oxidation polymers, as interlayers between the membrane and TiO 2 . PVDF membranes were first modified by a self-polymerization layer of either PANI or PDA and then coated with titanium dioxide (TiO 2 ). The TiO 2 remained firmly attached to the PANI and PDA layer, regardless of sonication and prolonged usage. The PANI and PDA layers enhanced the durability of PVDF membrane under UV/TiO 2 activation. After 72 h of irradiation, PVDF–PDA–TiO 2 and PVDF–PANI–TiO 2 membranes exhibited no significant change. This process improved both separation and photocatalytic activity in dye wastewater treatment. The PVDF–PDA–TiO 2 and PVDF–PANI–TiO 2 membranes showed enhanced membrane hydrophilicity, aiding in the rejection of organic pollutants and reducing fouling. The modified membranes exhibited a significant improvement in the flux recovery rate, attributed to the synergistic effects of high hydrophilicity and photocatalytic activity. Specially, the flux recovery rate increased from 17.7% (original PVDF) to 56.3% and 37.1% for the PVDF–PDA–TiO 2 membrane and PVDF–PANI–TiO 2 membrane. In dye rejection tests, the PVDF‒PDA‒TiO 2 membrane achieved 88% efficiency, while the PVDF‒PANI‒TiO 2 reached 95.7%. Additionally, the photodegradation of Reactive Red 239 (RR239) by these membranes further improved dye removal. Despite an 11% reduction in flux, the PVDF–PDA–TiO 2 membrane demonstrated greater durability and longevity. The assistance of PANI and PDA in TiO 2 coating also improved COD removal (from 33 to 58–68%) and provided self-protection for photocatalytic membranes, indicating that these photocatalytic membranes can contribute to more sustainable wastewater treatment processes.

Tio2 coating on alumina membranes for continuous separation of dyes

Preparation and Modification of Ceramic Membrane and Its Application in Oil/Water Wastewater Treatment

Facile surface modification of ceramic membranes using binary TiO2/SiO2 for achieving fouling resistance and photocatalytic degradation

TiO 2 /CMWCNT/CaAlg composite membrane used for dye desalination and its rapid cleaning under ultraviolet light and advanced oxidation activated by monopersulfate

Photocatalytic and antifouling performance of titania-coated alumina membranes produced using a facile sol-gel dip-coating approach

Fabrication and Photocatalytic Activity of Tio2 Nanofiber Membrane

Desalination of dye utilizing carboxylated TiO2/calcium alginate hydrogel nanofiltration membrane with high salt permeation

Modification of Al2O3 microfiltration membrane by nano-crystalline TiO2 coating

Superhydrophobic Alumina Hollow Ceramic Membrane Modi Fi Ed by TiO2 Nanorod Array for Vacuum Membrane Distillation

Titania Nanowires Coated PEI/P25 Membranes for Photocatalytic and Ultrafiltration Applications

Systematic Evaluation of TiO2-GO-modified Ceramic Membranes for Water Treatment: Retention Properties and Fouling Mechanisms

Ti3C2/W18O49 Hybrid Membrane with Visible-Light-driven Photocatalytic Ability for Selective Dye Separation

Self-Cleaning and Photodegradable PVDF- g -IL Dye Wastewater Separation Membranes Modified with Dopamine-Coated TiO 2 Core–Shell Particles

Application of Turbiscan Stability Index for the Preparation of Alumina Photocatalytic Membranes for Dye Removal

Characterization, performance analysis and comparison of ZrO2 or TiO2 doped Al2O3 composite membranes using sol-gel technique

Self-Cleaning and Photodegradable PVDF-g-IL Dye Wastewater Separation Membranes Modified with Dopamine-Coated TiO2 Core-Shell Particles

Empowering TiO2–coated PVDF membranes stability with polyaniline and polydopamine for synergistic separation and photocatalytic enhancement in dye wastewater purification

Preparation of Super Hydrophilic-Underwater Super Oleophobic Photoinduced Self-Cleaning Al2O3 @tio2 Ceramic Membrane and Separation Performance of Oil-in-water Emulsion

Styrene-maleic Anhydride/polyethersulfone Blending Membranes Modified by PEI Functionalized TiO2 to Enhance Separation and Antifouling Properties: Dye Purification

Hierarchical porous ceramic membrane with energetic ozonation capability for enhancing water treatment

Enhancement of super-hydrophilic/underwater super-oleophobic performance of ceramic membrane with TiO2 nanowire array prepared via low temperature oxidation