Abstract:Interface bonding strength plays a crucial role in enhancing the mechanical performance of beryllium/aluminum composites. In this study, the effects of Cu, Si and Mg doping on the interfacial properties of Be/Al composites were studied from the aspects of interfacial adhesion work and interfacial electronic structure through first-principles calculations based on density functional theory (DFT), and the Be/Al and Be/Al-5Cu-1.5Mg-0.2Si composites were prepared to verify the segregation behavior of doping elements at the interface and the effects of alloying elements addition on the interface bonding strength and mechanical properties. The first-principles calculation results reveal that the doping of Cu increases the interfacial adhesion work and strengthens the bonding between Be and Al atoms at the Be/Al interface, which leads to an enhancement of the bonding strength in the Al/Be interface. Si is found to have a beneficial effect on the interface bonding, albeit with a relatively minor influence. Conversely, the doping of Mg decreases the adhesion work of the Be/Al interface, as Mg forms anti-bonding with Be, thus being detrimental to the interface bonding. Energy spectrum analysis conducted on the near-interface region of the Be/Al-5Cu-1.5Mg-0.2Si composite reveals that Cu exhibits significant segregation at the Be/Al interface, Si exhibits a minor degree of segregation at the interface, while Mg does not show any significant segregation at the interface and is mainly distributed in Al matrix. Moreover, from the experimental comparison of interface bonding strength and mechanical performance between the two composites, it is evident that the addition of alloying elements (Cu, Mg, Si) effectively enhances the interface bonding and significantly improves the strength and ductility of the beryllium/aluminum composite. Combined the calculation and experimental results, it can be concluded that the enhancement of the bonding strength at the beryllium/aluminum interface is primarily driven by the addition of Cu, with a minor contribution from Si. Meanwhile, Mg strengthens the beryllium/aluminum composite mainly by strengthening the aluminum phase. This study provides an effective approach for enhancing the mechanical performance of beryllium/aluminum composites by regulating the interface bonding strength through matrix alloying.

Improved interface bonding of Al/Mg bimetal fabricated by compound casting with Nd addition

Strengthening of compound casting Al/Mg bimetallic interface with Ni interlayer by vibration assisted treatment

High-Resolution Electron Microscope Observation of Interface Microstructure of A Cast Al-Mg-Si-Bi-Pb(6262)/Al2o3p Composite

Significantly improved bonding strength of Al/Mg bimetallic interface by compound casting via FeCoNiCrCu high entropy alloy coating

Superior bonding of Al/Mg interface by introducing nanocrystals via high-entropy alloy coating and ultrasonic vibration

Interfacial microstructure, mechanical properties and strengthening mechanism of Mg/Al bimetallic composites produced by a novel compound casting with the addition of Gd

Effects of Cu, Si and Mg additions on the interfacial properties and mechanical properties of Be/Al composites: First-principles calculations and experimental studies

Preparation, interfacial regulation and strengthening of Mg/Al bimetal fabricated by compound casting: A review

Tailoring the heterophase interfacial structures to improve both strength and ductility of Al-Li alloys by fine tuning major solute Mg

Combined effects of ultrasonic vibration and FeCoNiCrCu coating on interfacial microstructure and mechanical properties of Al/Mg bimetal by compound casting

Interfacial Modification Using Matrix Alloying in Mg/CNT Composites for Improved Mechanical Performance

Microstructure and Mechanical Properties of Mg-7Zn-3Al Alloy with Nd and Y Additions

Enhanced bonding strength of Al/Fe bimetal by Ni-based alloys Ni-based interlayer prepared by laser cladding technique

Microstructure and age hardening behavior of Al/Fe bimetal prepared by one-step compound casting

Effect of Al-Nb-Ti-B addition on microstructures, tensile mechanical and damping properties of AZ91 alloy

The effect of alloy composition on the microstructure and tensile properties of binary Mg-rare earth alloys

The first-principles study of interfacial bonding strength and segregation behavior of alloyed elements at the η(MgZn 2 )/Al interface

Effects of Nd on the microstructure of ZA52 alloy

Microstructures and Mechanical Properties of As-Cast Mg–5Al–0.4Mn–xNd (x = 0, 1, 2 and 4) Alloys

Effect of vibration on interfacial microstructure and mechanical properties of Mg/Al bimetal prepared by a novel compound casting

Effect of high entropy alloy as the interlayer on the interfacial microstructure and mechanical property of Al/steel bimetal by compound casting