Seismic evaluation of plan irregular reinforced concrete building equipped with comb teeth metallic passive damper
R. Arvind,M. Helen Santhi,G. Malathi
DOI: https://doi.org/10.1080/15376494.2024.2421474
2024-10-30
Mechanics of Advanced Materials and Structures
Abstract:Active and passive damping devices exhibit significant energy dissipating behavior under seismic loads and are being used to control vibration in buildings worldwide. Comb Teeth Damper (CTD) is one of the most promising recent types of passive dampers which consist of steel plates with multiple teeth designed to dissipate seismic energy by in-plane flexural yielding. In this study, the CTD was modeled and analyzed under lateral cyclic load using the finite element analysis software, ABAQUS. The first phase of this investigation was a comprehensive parametric study on CTD with two different numbers of teeth, namely 4 teeth (4 CTD) and 5 teeth (5 CTD); each model with six different thicknesses, namely 5, 10, 15, 20, 25, and 30 mm. The parametric study showed that by increasing the number of teeth, the load-carrying capacity, initial stiffness, and energy dissipation capacity have increased considerably. A similar trend was observed when the thickness of the damper was increased. From the results of the parametric study, 5CTD with 15 mm thickness damper model was identified as a suitable model for utilizing in Reinforced Concrete (RC) buildings using optimization algorithm. In the second phase, a G + 14 storey plan irregular RC building was modeled in the structural engineering software ETABS and subjected to six different strong earthquake ground motions. The non-linear time history analysis was performed on the building with and without identified CTD and found that the building equipped with dampers reduced 56% top displacement, 60% inter-storey drift, and 33% energy dissipation.
materials science, multidisciplinary,mechanics, composites, characterization & testing