Abstract:The primary purpose of this research is to improve the seismic response of a complex asymmetric tall structure using viscoelastic (VE) dampers. Asymmetric structures have detrimental effects on the seismic performance because such structures create abrupt changes in the stiffness or strength that may lead to undesirable stress concentrations at weak locations. Structural control devices are one of the effective ways to reduce seismic impacts, particularly in asymmetric structures. For passive vibration control of structures, VE dampers are considered among the most preferred devices for energy dissipation. Therefore, in this research, VE dampers are implemented at strategic locations in a realistic case study structure to increase the level of distributed damping without occupying significant architectural space and reducing earthquake vibrations in terms of story displacements (drifts) and other design forces. It has been concluded that the seismic response of the considered structure retrofitted with supplemental VE dampers corresponded well in controlling the displacement demands. Moreover, it has been demonstrated that seismic response in terms of interstory drifts was effectively mitigated with supplemental damping when added up to a certain level. Exceeding the supplemental damping from this level did not contribute to additional mitigation of the seismic response of the considered structure. In addition, it was found that the supplemental damping increased the total acceleration of the considered structure at all floor levels, which indicates that for irregular tall structures of this type, VE dampers were only a good retrofitting measure for earthquake induced interstory deformations and their use may not be suitable for acceleration sensitive structures. Overall, the research findings demonstrate how seismic hazards to these types of structures can be reduced by introducing additional damping into the structure.

Study of Nonlinear Fluid Viscous Dampers Behaviour in Seismic Steel Structures Design

Unlocking Resilience: Examining the Influence of Fluid Viscous Dampers on Seismic Performance of Reinforced-concrete Structures in Earthquake-prone Regions

Comparative Study on Seismic Behavior of High–Rise Steel Building with and Without Friction Damper and Fluid Viscous Damper: A Review

Expected seismic response and annual seismic loss of viscously damped braced steel frames

Mitigating the seismic pounding of multi-story buildings in series using linear and nonlinear fluid viscous dampers

Advanced seismic resilient performance of steel MRF equipped with viscoelastic friction dampers

Multi-disciplinary performance comparison for selecting the optimal sustainable design of buildings structures with fluid-viscous dampers

Seismic analysis for tall and irregular temple buildings: A case study of strong nonlinear viscoelastic dampers

Aseismic Analysis of High-Rise Steel Structure Building with Viscous Dampers

Experimental Characterization, Modeling, and Numerical Evaluation of a Novel Friction Damper for the Seismic Upgrade of Existing Buildings

Seismic Resilience of Steel-Braced Frames Incorporating Steel Slit Dampers: A Review and Comparative Numerical Analysis

Seismic Response Analysis of Structures with Velocity-Dependent Dampers

Displacement-based Design Method for Energy Dissipation Structures with Nonlinear Viscous Dampers

Shake table tests and numerical investigation of a resilient damping device for seismic response control of building structures

Seismic Upgrading of Existing Steel Buildings Built on Soft Soil Using Passive Damping Systems

Study on Displacement-Based Design Method for Energy Dissipation Structures

Performance-based seismic design method for disc spring-based self-centering viscous dissipative braced steel frame

The role of viscoelastic damping on retrofitting seismic performance of asymmetric reinforced concrete structures

Modeling of a viscoelastic damper and its application in structural control

Study on Energy Dissipation of Viscous Damper for Long-Span Suspension Bridges

Numerical Evaluation of a Novel Passive Variable Friction Damper for Vibration Mitigation