Abstract:Abstract Microdischarges occurring during plasma electrolytic oxidation are the main mechanism promoting oxide growth compared to classical anodization. When the dissipated energy by microdischarges during the coating process gets too large, high-intensity discharges might occur, which are detrimental to the oxide layer. In bipolar pulsed plasma electrolytic oxidation a so called ‘soft-sparking’ mode limits microdischarge growth. This method is not available for unipolar pulsing and for all material combinations. In this work, the authors provide a method to control the size- and intensity distributions of microdischarges by utilizing a multivariable closed-loop control. In-situ detection of microdischarge properties by CCD-camera measurements and fast image processing algorithms are deployed. The visible size of microdischarges is controlled by adjusting the duty cycle in a closed-loop feedback scheme, utilizing a PI-controller. Uncontrolled measurements are compared to controlled cases. The microdischarge sizes are controlled to a mean value of A = 5 ⋅ 10 − 3 m m 2 and A = 7 ⋅ 10 − 3 m m 2 , respectively. Results for controlled cases show, that size and intensity distributions remain constant over the processing time of 35 minutes. Larger, high-intensity discharges can be effectively prevented. Optical emission spectra reveal, that certain spectral lines can be influenced or controlled with this method. Calculated black body radiation fits with very good agreement to measured continuum emission spectra ( T = 3200 K ). Variance of microdischarge size, emission intensity and continuum radiation between consecutive measurements is reduced to a large extent, promoting uniform microdischarge and oxide layer properties. A reduced variance in surface defects can be seen in SEM measurements, after coating for 35 minutes, for controlled cases. Surface defect study shows increased number density of microdischarge impact regions, while at the same time reducing pancake diameters, implying reduced microdischarge energies compared to uncontrolled cases.

Rapid oxidation of semiconductors at room temperature with a basic plasma cleaner

Floating Low-Temperature Radio-Frequency Plasma Oxidation of Polycrystalline Silicon-Germanium

Rapid Disinfection Performance of a Touchable Pulsed SDBD Nonthermal Plasma

Low-Temperature Floating Plasma Oxidation of Poly-SiGe

Plasma oxidation as an effective method in etching copper interconnect lines at room-temperature

Room temperature plasma oxidation mechanism to obtain ultrathin silicon oxide and titanium oxide layers

Plasma assisted remediation of SiC surfaces

High-Speed Plasma Etching of Gallium Oxide Substrates Using Atmospheric-Pressure Plasma with Hydrogen-Helium Mixed Gas

Pulsed N2 Plasma Surface Treatment for AlGaN/GaN HEMTs Prior to PECVD SiNx Passivation to Reduce Plasma Damage

Towards in-situ cleaning of a trapped ion quantum computer

Suppressing substrate oxidation during plasma-enhanced atomic layer deposition on semiconductor surfaces

In-situ control of microdischarge characteristics in unipolar pulsed plasma electrolytic oxidation of aluminum

Self-catalysis by aminosilanes and strong surface oxidation by O2 plasma in plasma-enhanced atomic layer deposition of high-quality SiO2.

Ultrafast Solid-Phase Oxidation of Aldehydes to Carboxylic Acids by Atmosphseric Plasma Treatment

In-Situ Surface Recombination Measurements of Oxygen Atoms on Anodized Aluminum in an Oxygen Plasma

Plasma Surface Treatment of Cu Current Collectors for Improving the Electrochemical Performance of Si Anodes

Proposing an Affordable Plasma Device for Polymer Surface Modification and Microbial Inactivation

Study on Oxygen Plasma-Based Copper Etching Process

Study on OH radical oxidation of 4H-SiC in plasma based on ReaxFF molecular dynamics simulation

Towards chemically neutral carbon cleaning processes: Plasma cleaning of Ni, Rh, and Al reflective optical coatings and thin Al filters for Free Electron Lasers and synchrotron beamline applications

RF plasma cleaning of optical surfaces: A study of cleaning rates on different carbon allotropes as a function of RF powers and distances