Abstract:This article proposes a support equilibrium design methodology for laser additive manufacturing of lightweight components based on geometric deformation minimization (GDM). Controlling geometric deformation commonly induced by material residual stress is especially significant for lightweight components, as slight deviation will be amplified, thereby inducing severe imbalance that makes premature failures. Aiming to investigate the impacts of support structures on photocurable manufactured parts and further conduct support equilibrium designs, a mechanically constrained volume shrink model was constructed jointly considering the chemical reaction kinetics and evolution of material properties. The deformation and stress distributions of manufactured parts with various conceptual support structures were confirmed, and the geometric deformation were mapped to the designed ideal model to generate the deformed manifold. The bidirectional fluid-solid coupling simulation, as well as buckling response analysis were conducted to verify the effectiveness of GDM in terms of improving working performance of lightweight components under variable working conditions. In addition, the balance analysis of mass distribution was conducted by calculating the offset distance of gravity center to examine the ability of the GDM-based support equilibrium design in reducing imbalance phenomena. The physical experiment is conducted on unmanned aerial vehicle (UAV) parts to verify GDM via digital light processing and microscopic images. The geometric deformation during manufacturing process is reduced by 13.08%, and the average centroid shift is improved by 27.44% based on GDM, which effectively improved the working performance of lightweight components.

Measurement for compensating for self-weight deformation error of large-aperture flat under vertical support

Small Angular Displacement Measurement Based on an Autocollimator and a Common-Path Compensation Principle.

Distortion Correction in Surface Defects Evaluating System of Large Fine Optics

Spherical Aberration Compensation Method for Long Focal-Length Measurement Based on Talbot Interferometry

Spatially Discretised Compensation Method for Coordinate Transformation in Large-Scale Metrology under Nonuniform Temperature Field

Misalignment Correction for Free-Form Surface in Non-Null Interferometric Testing

A New Optical Angle Measurement and Compensation

Vibration Compensating Beam Scanning Interferometer for Surface Measurement

Alignment Methods for Micron-Scale Surface Defects Automatic Evaluation of Large-Aperture Fine Optics

Support Equilibrium Design for Laser Additive Manufacturing of Lightweight Component Based on Geometric Deformation Minimization

Assembly Accuracy Analysis for Small Components with A Planar Surface in Large-Scale Metrology

Aberration Calibration in High-Na Spherical Surfaces Measurement on Point Diffraction Interferometry

The wavefront aberration analysis and testing accuracy evaluation for the large aberration aspheric system based on the best fit sphere - art. no. 68342V

Active-compensation of systematic error for the 1000 mm aperture flat interferometer

Error compensation for near optical coaxial phase measuring deflectometry with refraction error model

Light-tracing based surface deformation measurement strategy for large radio telescopes

Optical Pupil Shift Correction Method for Large Ground-Based Optical Telescopes

Integrated form-position measurement of large-aperture transparent elements based on stereoscopic phase measuring deflectometry

Niche construction, sources of selection and trait coevolution

Robust and Accurate Measurement of Optical Freeform Surfaces with Wavefront Deformation Correction.

Dynamic Deformation Measurement Of Specular Surface With Deflectometry And Speckle Digital Image Correlation