Abstract:A novel microfibrous composite bed reactor was developed and was demonstrated for high efficiency hydrogen production by the decomposition of ammonia at moderate temperatures in portable fuel cell power system applications. By using a high-speed and low-cost papermaking technology combined with a subsequent sintering process, sinter-locked three-dimensional microfibrous networks consisting of similar to 3 vol% 8 mm (dia.) nickel microfibers were utilized to entrap similar to 35 vol% 100-200 mu m dia. porous Al2O3 support particulates. A CeO2 promoter and active Ni component were then dispersed onto the pore surface of the entrapped Al2O3 support particulates by a stepwise incipient wetness impregnation method. The microfibrous structure took advantage of a large void volume, entirely open structure, high heat/mass transfer, high permeability, good thermal stability, and unique form factors. Addition of ceria significantly promoted the low-temperature activity of Ni/Al2O3 catalyst particulates incorporated into the micorfibrous structure. The use of fine particles of catalyst significantly attenuated the intraparticle mass transport limitations. As a result, the present novel microfibrous composite bed reactor provided excellent activity and structure stability in ammonia decomposition, as well as low pressure drop and high efficiency reactor design. At a 90% conversion of a 145 sccm ammonia feed rate, the microfibrous entrapped Ni/CeO2-Al2O3 catalyst composite bed could provide a 4-fold reduction of catalytic bed volume and a 5-fold reduction of catalytic bed weight (or 9-fold reduction of catalyst dosage), while leading to a reduction of reaction temperature of 100 degrees C, compared to a packed bed with 2 mm dia. Ni/CeO2-Al2O3 catalyst pellets. This composite bed was capable of producing roughly 22 W of hydrogen power, with an ammonia conversion of 99% at 600 degrees C in a bed volume of 0.5 cm(3) throughout a 100 h continuous test. These initial and promising results established that the microfibrous nickel-based catalyst composites were effective for high efficiency production of hydrogen by ammonia decomposition, while achieving a significant reduction of overall catalytic bed weight and volume. We anticipate our assay to be a new point for small-scale hydrogen production, where the microfibrous catalytic reactors considered in isolation can satisfy several of the most fundamental criteria needed for useful operation.

Hydrogen production from formic acid in fluidized bed made out of Ni-cenosphere catalyst

Efficient Hydrogen Generation from Formic Acid Using AgPd Nanoparticles Immobilized on Carbon Nitride-Functionalized SBA-15

Hydrogen Production from Catalytic Formic Acid Decomposition over Zn Based Catalysts under Room Temperature

Hydrogen Generation from Borohydride Hydrolysis on Surface-Alloyed Ni Foam

Production of Hydrogen and Carbon Nanotubes from Methane Decomposition in A Two-Stage Fluidized Bed Reactor

Hydrogen Production by Formic Acid Decomposition over Ca Promoted Ni/SiO2 Catalysts: Effect of the Calcium Content

Computational Investigation of Microreactor Configurations for Hydrogen Production from Formic Acid Decomposition Using a Pd/C Catalyst

Production of Hydrogen-Rich Gas by Formic Acid Decomposition over CuO-CeO2/γ-Al2O3 Catalyst

Computational Studies on Microreactors for the Decomposition of Formic Acid for Hydrogen Production Using Heterogeneous Catalysts

Novel microfibrous composite bed reactor: high efficiency H2 production from NH3 with potential for portable fuel cell power supplies.

Hydrogen and carbon produced by fluidized bed catalytic methane decomposition

Simultaneous and Continuous Production of Carbon Nanotubes and Hydrogen by Catalytic CH 4 Decomposition in a Pressurized Fluidized-Bed Reactor

Continuous hydrogen production from liquid-phase formic acid dehydrogenation over Pd/AC catalysts: a kinetic study

Decomposition of Formic Acid and Acetic Acid into Hydrogen Using Graphitic Carbon Nitride Supported Single Metal Catalyst

Efficient Hydrogen Production from Formic Acid Using Nitrogen-Doped Activated Carbon Supported Pd

B-Doped Pd Catalyst: Boosting Room-Temperature Hydrogen Production From Formic Acid-Formate Solutions

High dispersed Pd nanoparticles anchored on carbon nitride for hydrogen production of formic acid

PREPARATION OF HYDROGEN AND CARBON NANOTUBES via METHANE DECOMPOSITION IN FLUIDIZED-BED REACTOR

Cellulose nanocrystals supported ternary alloy nanoclusters catalysts for efficient hydrogen production from formic acid

Hydrogen production from acetic acid decomposition as bio-oil model molecule over supported metal catalysts

Catalytic hydrolysis of alkaline sodium borohydride solution for hydrogen evolution in a micro‐scale fluidized bed reactor