Abstract:In a combination of generation and storage of hydrogen gas, both formic acid (FA) and acetic acid (AA) have been notified as efficient hydrogen carriers. This study was conducted to synthesize the monometallic catalysts namely palladium (Pd), copper (Cu), and zinc (Zn) on graphitic-carbon nitride (g-C3N4) and to study the potential of these catalysts in FA and mixed formic acid (FA)-acetic acid (AA) decomposition reaction. Several parameters have been studied in this work such as the type of active metals, temperature, and metal loadings. The mass percentage of Pd, Cu, and Zn metal used in this experiment are 1, 3, and 5 wt%, respectively. At low temperature of 30 °C, 5wt% Pd/g-C3N4 catalyst yielded higher volume of gas with 3.3 mL, instead of other Pd percentage loadings. However, at higher temperature of 70 °C and 98% FA concentration, Pd with 1 wt%, 3 wt%, and 5 wt% of loading over g-C3N4 has successfully produced optimum gas (H2 and CO2) of 4.3 mL, 7.4 mL, and 4.5 mL in each reaction, respectively. At higher temperature, Pd metal showed high catalytic performance and the most active element of monometallic system in ambient condition. Meanwhile, at higher percentage of Pd metal, the catalytic decomposition reaction also increased thus producing more gas. However, it can be seen the agglomeration of the particles formed at higher loadings of Pd (5 wt%), and remarkably lowering the catalytic activity at higher temperature, while higher activity at low temperature of 30 °C. The result also showed low catalytic decomposition reaction for Cu and Zn catalyst, due to the small formation of Cu and Zn metal, but presence of high metal oxide (CuO) and (ZnO) promotes the passive layer formation on the catalyst surface.

Production of Hydrogen-Rich Gas by Formic Acid Decomposition over CuO-CeO2/γ-Al2O3 Catalyst

Efficient Hydrogen Generation from Formic Acid Using AgPd Nanoparticles Immobilized on Carbon Nitride-Functionalized SBA-15

Hydrogen Production from Catalytic Formic Acid Decomposition over Zn Based Catalysts under Room Temperature

Decomposition of Formic Acid and Acetic Acid into Hydrogen Using Graphitic Carbon Nitride Supported Single Metal Catalyst

Direct Production of Hydrogen Peroxide from CO, O2, and H2O over a Novel Alumina-Supported Cu Catalyst

Preferential Oxidation of CO and Its Subsequent Methanation in H2-rich Gas over CuO–NiO/CeO2 Catalysts

Chromic hydroxide-decorated palladium nanoparticles confined by amine-functionalized mesoporous silica for rapid dehydrogenation of formic acid

Hydrogen production from acetic acid decomposition as bio-oil model molecule over supported metal catalysts

Synergistic Electronic Interaction in PdCu Alloy/TiO2-NSs for Ambient Efficient Dehydrogenation of Formic Acid.

Efficient Subnanometric Gold-Catalyzed Hydrogen Generation Via Formic Acid Decomposition under Ambient Conditions.

CuFeO2–CeO2 nanopowder catalyst prepared by self-combustion glycine nitrate process and applied for hydrogen production from methanol steam reforming

Formic Acid Production Via Methane Peroxide Oxidation Over Oxalic Acid Activated Fe-MFI Catalysts

Rh/CeO2-SiC As a Catalyst in Partial Oxidation of Ethanol for Hydrogen Production

Computational Studies on Microreactors for the Decomposition of Formic Acid for Hydrogen Production Using Heterogeneous Catalysts

Cellulose nanocrystals supported ternary alloy nanoclusters catalysts for efficient hydrogen production from formic acid

Hydrogen Production by Formic Acid Decomposition over Ca Promoted Ni/SiO2 Catalysts: Effect of the Calcium Content

Dual Hydrogen Production System: Synergistic Effect of Ru and Ce Over Cu2O Nanotubes Drives Hydrogen Evolution and Formaldehyde Oxidation

Production of hydrogen by catalytic reforming of dimethoxymethane over bifunctional catalysts

Methanol Decomposition to Synthesis Gas over Supported Platinum-Containing Catalysts

Copper-catalysed exclusive CO<sub>2</sub> to pure formic acid conversion via single-atom alloying

Non‐oxidative conversion of methanol to dimethyl ether, methyl formate and dimethoxymethane over Cu/Hβ catalyst: Tailoring product selectivity