Abstract:Background: In acetabular fracture surgery, understanding the biomechanical behaviour of fractures and implants is beneficial for clinical decision-making about implant selection and postoperative (early) weightbearing protocols. This study outlines a novel approach for creating finite element models (FEA) from actual clinical cases. Our objectives were to (1) create a detailed semi-automatic three-dimensional FEA of a patient with a transverse posterior wall acetabular fracture and (2) biomechanically compare patient-specific implants with manually bent off-the-shelf implants. Methods: A computational study was performed in which we developed three finite element models. The models were derived from clinical imaging data of a 20-year-old male with a transverse posterior wall acetabular fracture treated with a patient-specific implant. This implant was designed to fit the patient's anatomy and fracture configuration, allowing for optimal placement and predetermined screw trajectories. The three FEA models included an intact hemipelvis for baseline comparison, one with a fracture fixated with a patient-specific implant, and another with a conventional implant. Two loading conditions were investigated: standing up and peak walking forces. Von Mises stress and displacement patterns in bone, implants and screws were analysed to assess the biomechanical behaviour of fracture fixation with either a patient-specific versus a conventional implant. Results: The finite element models demonstrated that for a transverse posterior wall type fracture, a patient-specific implant resulted in lower peak stresses in the bone (30 MPa and 56 MPa) in standing-up and peak walking scenario, respectively, compared to the conventional implant model (46 MPa and 90 MPa). The results suggested that patient-specific implant could safely withstand standing-up and walking after surgery, with maximum von Mises stresses in the implant of 156 MPa and 371 MPa, respectively. The results from the conventional implant indicate a likelihood of implant failure, with von Mises stresses in the implant (499 MPa and 1000 MPa) exceeding the yield stress of stainless steel. Conclusion: This study presents a workflow for conducting finite element analysis of real clinical cases in acetabular fracture surgery. This concept of personalized biomechanical fracture and implant assessment can eventually be applied in clinical settings to guide implant selection, compare conventional implants with innovative patient-specific ones, optimizing implant designs (including shape, size, materials, screw positions), and determine whether immediate full weight-bearing can be safely permitted.

Finite element analysis of medial closing and lateral opening wedge osteotomies of the distal femur in relation to hinge fractures

Hinge location and apical drill holes in opening wedge high tibial osteotomy: A finite element analysis

Finite Element Analysis of Protective Measures against Lateral Hinge Fractures in High-Tibial Osteotomy

Biomechanical Evaluation of Different Types of Lateral Hinge Fractures in Medial Opening Wedge High Tibial Osteotomy.

Finite element analysis of biomechanical effects of residual varus/valgus malunion after femoral fracture on knee joint

Analysis of load distribution on the plate and lateral hinge of a valgus opening high tibial osteotomy during weight-bearing: a finite element analysis

Finite element study of stress distribution in medial UKA under varied lower limb alignment

The Effects of Tibia Profile, Distraction Angle, and Knee Load on Wedge Instability and Hinge Fracture: A Finite Element Study.

Intraoperative Complications in Medial Opening Wedge High Tibial Osteotomy

Biomechanical Lower Limb Model to Predict Patellar Position Alteration after Medial Open Wedge High Tibial Osteotomy

Medial open wedge osteotomy yields comparable stability to lateral open wedge procedure on the distal femur

Midterm results following medial closed wedge distal femoral osteotomy stabilized with a locking internal fixation device

Semi-automated finite element analyses of surgically treated acetabular fractures to investigate the biomechanical behaviour of patient-specific compared to conventional implants

Soft Tissue Stabilization of the Hinge Position for Lateral Closing-Wedge Distal Femoral Osteotomy: An Anatomic Study

Finite element analysis and a pilot study of different fixation constructs for Danis-Weber A and B lateral malleolus fractures

Relative Instability Ratios of Bone Wall Defects in Trochanteric Hip Fractures: A Finite Element Analysis

Lateral hinge fracture does not compromise postoperative alignment of valgus open wedge high tibial osteotomy

Biomechanical effects of femoral prosthesis misalignment on the structure of the lateral compartment during medial unicompartmental knee arthroplasty in osteoporotic patients

Influence of variable hinge positioning on coronal and sagittal alignment in uniplanar medial open-wedge high tibial osteotomy

Finite Element Analysis of Various Osteotomies Used in the Treatment of Developmental Hip Dysplasia in Children

Numerical evaluation of internal femur osteosynthesis based on a biomechanical model of the loading in the proximal equine hindlimb