Abstract:Aircraft secondary flow systems are small-flow circulation devices that are used for thermal and cold management, flow control, and energy generation on aircraft. The aerodynamic characteristics of main-flow-based inlets have been widely studied, but the secondary-flow-based small inlets, jets, and blowing and suction devices have seldom been studied. Two types of secondary flow systems embedded in a supersonic aircraft wing, a ram-air intake and a submerged intake, are researched here. Firstly, wind tunnel tests under subsonic, transonic, and supersonic conditions are carried out to test the total pressure recovery and total pressure distortion. Secondly, numerical simulations are used to analyze the flow characteristics in the secondary flow systems. The numerical results are validated with experimental data. The calculating errors of the total pressure recovery on the ram-air and submerged secondary flow systems are 8% and 10%, respectively. The simulation results demonstrate that the total pressure distortion tends to grow while the total pressure recovery drops with the increasing Mach number. As the Mach number increases from 0.4 to 2, the total pressure recovery of the ram-air secondary flow system decreases by 68% and 71% for the submerged system. Moreover, the total pressure distortion of the ram-air and submerged secondary flow systems is increased by 19.7 times and 8.3 times, respectively. Thirdly, a detailed flow mechanism is studied based on the simulation method. It is found that the flow separation at the front part of the tube is induced by adverse pressure gradients, which primarily determine the total pressure recovery at the outlet. The three-dimensional vortex in the tube is mainly caused by the change in cross-sectional shape, which influences the total pressure distortion.

Research Progress in Numerical Simulation of Aircraft Wing Flow Field

Constrained Large-Eddy Simulation and Detached Eddy Simulation of Flow Past a Commercial Aircraft at 14 Degrees Angle of Attack

Numerical and Experimental Research of Flow Control on an NACA 0012 Airfoil by Local Vibration

Numerical study of flow past an axisymmetric body with a ring wing at various attack angles

Wind Tunnel Experiment and Numerical Simulation of Secondary Flow Systems on a Supersonic Wing

Research on the pressure distribution under different airfoil types of aircraft

Summary of Numerical Simulation of the Internal Flow in the Turbomachinery

Simulation Analysis of Fluid-Structure Interaction of High Velocity Environment Influence on Aircraft Wing Materials under Different Mach Numbers

Numerical simulation of droplet impingement and film flow for three-dimensional wings

Numerical Simulation on Aerodynamic Characteristics of Transition Section of Tilt-Wing Aircraft

Supercritical Wing Design and Optimization for Transonic Civil Airplane

Numerical Study of a Supercritical Airfoil/wing with Variable-Camber Technology

Study on the influence of high-temperature thermochemical nonequilibrium effects on the flow field characteristics around shaped wing

Numerical Simulation of Ice Accretion on Wings and Flow Field Analysis

CFD-based study of several geometrical parameters of winglet

Supercritical natural laminar flow airfoil optimization for regional aircraft wing design

Heat transfer and pressure drop characteristic research of sine wavy flying-wing fins

Numerical Simulation of 2D Airfoil Lift Enhancement with Flaps

Three-Dimensional Simulation of Micro Air Vehicles with Low-Aspect-Ratio Wings

Numerical Analysis Of Active Flow Control Around Airfoil By Synthetic Jet Technology In Low Reynolds Number

Numerical study on the influence of wall temperature gradient on aerodynamic characteristics of low aspect ratio flying wing configuration