Abstract:Nano composites have been utilized increasingly because of their high strength, stiffness, toughness, and through-thickness properties. The incorporation of carbon nano fibers with a high aspect ratio and extremely large surface area into glass/epoxy polymer composites improve their tensile and compression properties significantly. Although a number of efforts have been made to improve various properties by mixing nano particles directly into resin, however, it could lead to high viscosities which create problems during processing. In this particular study, an attempt has been made to investigate tensile and compression behavior of nano composites by using, state of the art, a different technique i.e spraying the Carbon Nano Fibers (CNF) on dry woven glass pre-form before infusion. The nano composite samples were prepared using a spraying methodology i.e dispersing the 2.0 weight percent CNF solution on glass fabric, and evaporating the solvent such that only nano fibers remain on perform, followed by Vacuum Assisted Resin Transfer Molding (VARTM). Tensile and compression tests were performed to evaluate the effectiveness and behavior of CNF addition on these mechanical properties. Results indicated simultaneous improvement in tensile and compression properties by incorporating a very small amount of carbon nano fibers into the matrix system. 18-21 percent improvement in tensile strength and 6-9 percent in compressive strength, with respect to the neat composite. The rise in their modulus has also been discussed in detail and part of this study. For in-depth analysis, microscopic approaches were also carried out to investigate the fracture behavior and mechanism of material. Scanning electron microscopy of fractured surfaces revealed improved primary fiber matrix adhesion and indications of CNF-induced matrix toughening due to the presence of CNFs. SEM evaluation also revealed relatively less damage in the tested fracture surfaces of the nano phased composites in terms of matrix failure, fiber breakage, matrix fiber de-bonding, and de-lamination, compared to the neat system.

Carbon Nanostructure-based Glass Composites: A Review

Dental Applications of Nanostructured Bioactive Glass and Its Composites.

Nanometal-Glass Hybrid Nanocomposites: Synthesis, Properties and Applications

Carbon Nanofibers and Their Composites: A Review of Synthesizing, Properties and Applications

Nanocrystal-in-glass composite (NGC): A powerful pathway from nanocrystals to advanced optical materials

Tensile and compression behavior of woven glass/epoxy nano composites based on spraying methodology

Quartz, glass, and glass-ceramic matrix nanocomposites; containing carbon nanotubes: a review

Multifunctional carbon nanofiber-reinforced Ge25Sb10S65 chalcogenide glassy composites

Soft-Nanocomposites of Nanoparticles and Nanocarbons with Supramolecular and Polymer Gels and Their Applications.

Synthesis and Properties Optimization of High-Performance Nanostructured Metallic Glass Thin Films

A Comparative Analysis of Standard and Nano-Structured Glass for Enhancing Heat Transfer and Reducing Energy Consumption Using Metal and Oxide Nanoparticles: A Review

Processing, electronic properties and applications of Carbon-based nanocomposites

Nanoglass–Nanocrystal Composite—a Novel Material Class for Enhanced Strength–Plasticity Synergy

Bioactive glass–polymer nanocomposites: a comprehensive review on unveiling their biomedical applications

Carbon dot composites for bioapplications: a review

Carbon Nanorings and Nanobelts: Material Syntheses, Molecular Architectures, and Applications

Production, structural design, functional control, and broad applications of carbon nanofiber-based nanomaterials: A comprehensive review

Mechanical Characterization of Glass/epoxy Polymer Composites Sprayed with Vapor Grown Carbon Nano Fibers

Review of the Recent Development in Metallic Glass and Its Composites

Graphitic carbon nitride-based nanocomposites and their biological applications: a review.

Effect of processing techniques used for improvement of mechanical properties of Glass fiber epoxy nano composites