Abstract:Nano composites have been utilized increasingly because of their high strength, stiffness, toughness, and through-thickness properties. The incorporation of carbon nano fibers with a high aspect ratio and extremely large surface area into glass/epoxy polymer composites improve their tensile and compression properties significantly. Although a number of efforts have been made to improve various properties by mixing nano particles directly into resin, however, it could lead to high viscosities which create problems during processing. In this particular study, an attempt has been made to investigate tensile and compression behavior of nano composites by using, state of the art, a different technique i.e spraying the Carbon Nano Fibers (CNF) on dry woven glass pre-form before infusion. The nano composite samples were prepared using a spraying methodology i.e dispersing the 2.0 weight percent CNF solution on glass fabric, and evaporating the solvent such that only nano fibers remain on perform, followed by Vacuum Assisted Resin Transfer Molding (VARTM). Tensile and compression tests were performed to evaluate the effectiveness and behavior of CNF addition on these mechanical properties. Results indicated simultaneous improvement in tensile and compression properties by incorporating a very small amount of carbon nano fibers into the matrix system. 18-21 percent improvement in tensile strength and 6-9 percent in compressive strength, with respect to the neat composite. The rise in their modulus has also been discussed in detail and part of this study. For in-depth analysis, microscopic approaches were also carried out to investigate the fracture behavior and mechanism of material. Scanning electron microscopy of fractured surfaces revealed improved primary fiber matrix adhesion and indications of CNF-induced matrix toughening due to the presence of CNFs. SEM evaluation also revealed relatively less damage in the tested fracture surfaces of the nano phased composites in terms of matrix failure, fiber breakage, matrix fiber de-bonding, and de-lamination, compared to the neat system.

Effect of processing techniques used for improvement of mechanical properties of Glass fiber epoxy nano composites

Tensile and compression behavior of woven glass/epoxy nano composites based on spraying methodology

Mechanical Enhancement of Carbon Fiber/Epoxy Composites Based on Carbon Nano Fibers by Using Spraying Methodology

Mechanical Characterization of Glass/epoxy Polymer Composites Sprayed with Vapor Grown Carbon Nano Fibers

Improved mechanical performance of three-dimensional woven glass/epoxy spacer composites with carbon nanotubes

Mechanical Characterization of Hybrid Nano-Filled Glass/Epoxy Composites

Interlaminar microstructure and mechanical response of 3D robust glass fabric-polyester composites modified with carbon nanofibers

Mechanical and thermal properties improvement of nano calcium carbonate-filled epoxy/glass fiber composite laminates

Enhanced Mechanical and Thermal Properties in Epoxy-Based Glass Fabric Composites via Nano Silica Integration

Effects of silica nanoparticles on glass and carbon fiber epoxy composites

Effect of bio nanofiller in influencing the carbon and E-glass fabric reinforced composites

Effects of Thickness and Amount of Carbon Nanofiber Coated Carbon Fiber on Improving the Mechanical Properties of Nanocomposites

Effect of deposited carbon nanotubes on interlaminar properties of carbon fiber-reinforced epoxy composites using a developed spraying processing

Structure And And Property Of Carbon Nanotubes Attached Glass Fabric Reinforced Epoxy Composites

The Mechanical Property on Dental Polymeric Nano-Fiber Composites

On improvement of mechanical and thermo-mechanical properties of glass fabric/epoxy composites by incorporating CNT–Al 2 O 3 hybrids

Ultrasonic Vacuum Resin Infusion Processing and Property of Carbon Nanotube/Glass Fiber/Epoxy Resin Laminates

Hybrid Multi-Scale Composites Developed from Glass Microfiber Fabrics and Nano-Epoxy Resins Containing Electrospun Glass Nanofibers

Nano-epoxy Resins Containing Electrospun Carbon Nanofibers and the Resulting Hybrid Multi-Scale Composites

Microstructural design and mechanical performance of epoxy/carbon nanotube fiber composite

Mechanical Properties of Epoxy and Its Carbon Fiber Composites Modified by Nanoparticles